黑退带钢厂家连退炉气密性测试方案?

您目前所在的位置:首页 - 期刊简介 - 详细页面
中南大学学报(自然科学版)
Journal of Central South University
第43卷&&&&第5期&&&&总第213期&&&&2012年5月
文章编号:12)05-1724-08
连退炉内炉辊热变形对带钢瓢曲变形的影响
唐荻,杨静,苏岚,江海涛,杨荃
(北京科技大学 高效轧制国家工程研究中心,北京,100083)
要: 利用有限元法,采用单锥度辊作为炉辊初始辊形,分别通过热应力计算和屈曲分析,连续退火炉加热段和快冷段内炉辊热变形及其对带钢瓢曲变形的影响。研究结果表明:在加热段,炉辊热变形后,随着炉辊温差的增大,炉辊形状分别为双锥度辊、单锥度辊和“M”型辊,且炉辊总锥度随温差增大而减小;当炉辊温差在一定范围之内时,炉辊热变形对防止带钢瓢曲变形有利;在快冷段,炉辊热变形后,炉辊变为双锥度辊,随炉辊温差的增大,炉辊总锥度变大,且带钢更容易发生瓢曲变形。基于计算分析,从炉辊热变形角度考虑,对加热段和快冷段的炉辊的温差控制及炉辊选择给出了合理的建议。
关键字: 连续退火炉;炉辊;热变形;温差;带钢;瓢曲
Influence of roller thermal deformation on strip buckling in continuous annealing furnace
&&&&&& TANG Di, YANG Jing, SU Lan, JIANG Hai-tao, YANG Quan
(National Engineering Research Center of Advanced Rolling,
University of Science and Technology Beijing, Beijing 100083, China)
Abstract:FEM was used to investigate the influence of roller thermal deformation on the strip buckling in the heating and rapid cooling sections of the continuous ann, ealing furnace by thermal stress calculation and buckling analysis, and the single taper roller was chosen as the original roller type. In the heating section, the roller type was changed to be the double taper roller, the single taper roller and “M” shape roller with the increase of the temperature difference, accompanied by the decrease of the total roller taper. Within certain temperature difference, the thermal deformation of roller is helpful to prevent the strip buckling. In the rapid cooling section, the single taper roller is changed to be the double taper roller after the thermal deformation and its total roller taper increases with the increase of the temperature difference. The changes promote the probability of strip buckling. Considering the roller thermal deformation, a reasonable suggestion was proposed for the temperature difference control and the type selection of roller in the heating and rapid cooling sections.
Key words: continuo te buckling
CN 43-1426/NZDXZAC
CN 43-1516/TBJCSTFT 上传我的文档
 下载
 收藏
该文档贡献者很忙,什么也没留下。
 下载此文档
正在努力加载中...
冷轧连续退火炉气密性试验关键技术
下载积分:874
内容提示:冷轧连续退火炉气密性试验关键技术
文档格式:PDF|
浏览次数:14|
上传日期: 11:32:19|
文档星级:
该用户还上传了这些文档
冷轧连续退火炉气密性试验关键技术
官方公共微信登录龙源账号
1.点击网站首页右上角的“充值”按钮可以为您的帐号充值
2.可选50.100或500的充值金额,充值后按篇按本计费
3.充值成功后即可购买网站上的任意文章或杂志的电子版
4.购买后文章可打印,杂志可在个人中心的订阅/零买找到
5.登陆后可阅读免费专区的精彩内容
连续退火炉安装技术
【摘 要】 连续退火炉是连退线上的核心设备,它的主要功能是把带钢加热到设定的退火温度、保温并在适当的冷却速度下冷却到设定温度,实现带钢热处理工艺的要求。连续退火炉主要由炉体钢结构、炉壳、辐射管、炉辊、炉壳附件、炉底盖和炉顶盖等设备组成。本文主要从连续退火炉的设备安装施工工艺和气密性试验的施工方法进行总结。(剩余2817字)
( &&&欢迎:,,)
畅销排行榜
中国科技纵横 2015年04期
中国科技纵横 2014年17期
中国科技纵横 2016年20期
中国科技纵横 2016年14期
中国科技纵横 2016年11期
中国科技纵横 2016年20期
中国科技纵横 2012年03期
中国科技纵横 2013年21期
中国科技纵横 2016年16期
中国科技纵横 2013年11期
邮箱/用户名
还没有龙源账户?503 Service Temporarily Unavailable
503 Service Temporarily Unavailable
openresty/1.9.7.4

我要回帖

更多关于 黑退带钢厂家 的文章

 

随机推荐