All rights reserved Powered by
copyright &copyright 。甜梦文库内容来自网络，如有侵犯请联系客服。|CentOS5.6下安装Oracle10G软件【保留报错经验】
CentOS5.6下安装10G
********************************************************************************
*目标：在Centos下，安装Oracle10g软件
* 1、安装包
* 2、域名解析设置及网络配置
* 3、创建用户、组
* 4、配置内核参数、修改环境变量
* 5、设置shell限制
* 6、创建相关目录、赋权
* 7、远程图形化安装Oracle软件
*******************************************************************************
--挂载光盘
[root@localhost CentOS]#mount /dev/hdb /media --通过df -h查看到相关目录，依实际情况挂载
[root@localhost CentOS]# cd /etc/yum.repos.d/ --进入到该目录下生成一个配置文件
[root@localhost CentOS]# ls
[root@localhost CentOS]# cp CentOS-Debuginfo.repo yum.repo --做一个拷贝
[root@localhost CentOS]# mv CentOS-Debuginfo.repo CentOS-Debuginfo.repo.bak
[root@localhost CentOS]#cp * /hylbak --将yum.repos.d下文件做一个备份
[root@localhost CentOS]#rm -rf Centos* --将无关文件删除
[root@localhost CentOS]#vi yum.repo
name=CentOS-6 - Debuginfo
baseurl=file:///media --此处光盘挂载到了media目录下
gpgcheck=0
#gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-Debug-6
[root@localhost CentOS]#yum install -y binutils-2.17.50.0.6 --举例：使用yum安装格式
[root@localhost CentOS]#rpm -q binutils-2.17.50.0.6 --举例：使用rpm查看软件包安装情况
--修改：不要按下面参考文档提示安装，第一次按其安装出错
--安装时需要使用下文修改的&黄色&标记安装方案
--保留第一次缺失安装包参考，引以为戒
--安装包缺失时参考如下文档所致
--下表为第一次安装，安装后续发现出现包不全状况，对其包进行更正和补充，若实际安装采用之后的安装包方案，此处不做删除以示反例
安装包参考（提醒：不要按此安装，实际安装见后文）
参考文档提示安装包
实际通过光盘安装包
binutils-2.17.50.0.6
binutils-2.17.50.0.6
compat-libstdc++-33-3.2.3
compat-libstdc++-33-3.2.3-61
elfutils-libelf-0.125
elfutils-libelf-0.137
elfutils-libelf-devel-0.125
elfutils-libelf-devel-0.137
elfutils-libelf-devel-static-0.125
elfutils-libelf-devel-static-0.137
gcc-c++-4.1.2
gcc-c++-4.1.2
glibc-common-2.5
glibc-common-2.5
glibc-devel-2.5
glibc-devel-2.5
glibc-headers-2.5
glibc-headers-2.5
kernel-headers-2.6.18
kernel-headers-2.6.18
ksh-.el5_5.1
libaio-0.3.106
libaio-0.3.106
libaio-devel-0.3.106
libaio-devel-0.3.106
libgcc-4.1.2
libgcc-4.1.2
libgomp-4.1.2
libgomp-4.4.4-13.el5.x86_64
libstdc++-4.1.2
libstdc++-4.1.2
libstdc++-devel-4.1.2
libstdc++-devel-4.1.2
sysstat-7.0.2
sysstat-7.0.2
unixODBC-2.2.11(32 bit)
unixODBC-2.2.11-7.1
unixODBC-devel
unixODBC-devel-2.2.11-7.1.x86_64
pdksh-5.2.14
pdksh-5.2.14-36.el5
numactl-0.9.8
numactl-0.9.8
libXp-1.0.0
libXp-1.0.0
libXp-devel-1.0.0
libXp-devel-1.0.0-8.1.el5.x86_64、libXp-devel-1.0.0-8.1.el5.i386.rpm
libXau-devel-1.0.1
libXau-devel-1.0.1
--按错误参考安装包指令
yuminstall -y binutils-2.17.50.0.6 compat-libstdc++-33-3.2.3-61elfutils-libelf-0.137 elfutils-libelf-devel-0.137elfutils-libelf-devel-static-0.137 gcc-4.1.2 gcc-c++-4.1.2 glibc-common-2.5glibc-devel-2.5 glibc-headers-2.5 kernel-headers-2.6.18 ksh-.el5_5.1libaio-0.3.106 libaio-devel-0.3.106 libgcc-4.1.2 libgomp-4.4.4-13.el5.x86_64libstdc++-4.1.2 libstdc++-devel-4.1.2 make-3.81 sysstat-7.0.2unixODBC-2.2.11-7.1 unixODBC-devel-2.2.11-7.1.x86_64 pdksh-5.2.14-36.el5numactl-0.9.8 libXp-1.0.0 libXp-devel-1.0.0-8.1.el5.x86_64libXp-devel-1.0.0-8.1.el5.i386.rpm libXau-devel-1.0.1
正确安装包方案（使用以下安装包流程，经过二次验证成功）
--使用以下安装包方案
--根据多次试验，执行如下指令，安装包
--安装常用软件
[root@hyl ~]# yum -y install autoconf automake binutils-devel bisoncpp dos2unix ftp gcc gcc-c++ lrzsz python-devel
--安装 Oracle必需软件:
[root@hyl ~]# yum -y install compat-db compat-db42 compat-db43 compat-gcc-34 compat-gcc-34-c++ compatlibstdc++-33 glibc-* glibc-*.i686libXpm-*.i686 libXp.so.6 libXt.so.6 libXtst.so.6 libgcc_s.so.1 ksh libXp libaio-develnumactl numactl-devel unixODBC unixODBC-devel
[root@hyl ~]# yum -y install glibc-devel.i386 glibc-devel.x86_64compat-db.i386 compat-db.x86_64 compat-libstdc++-296.i386compat-libstdc++-33.i386 compat-libstdc++-33.x86_64
[root@hyl ~]# yum -y install compat-gcc-34.x86_64compat-gcc-34-c++.x86_64 gcc.x86_64 gcc-c++.x86_64 pdksh.x86_64 openmotif.i386openmotif.x86_64 sysstat.x86_64
--验证安装包情况
[root@hyl yum.repos.d]# rpm -q glibc-devel.i386 glibc-devel.x86_64 compat-db.i386 compat-db.x86_64 compat-libstdc++-296.i386compat-libstdc++-33.i386 compat-libstdc++-33.x86_64
glibc-devel-2.5-58
glibc-devel-2.5-58
compat-db-4.2.52-5.1
compat-db-4.2.52-5.1
compat-libstdc++-296-2.96-138
compat-libstdc++-33-3.2.3-61
compat-libstdc++-33-3.2.3-61
[root@hyl yum.repos.d]# rpm -q compat-gcc-34.x86_64compat-gcc-34-c++.x86_64 gcc.x86_64 gcc-c++.x86_64 pdksh.x86_64 openmotif.i386openmotif.x86_64 sysstat.x86_64
compat-gcc-34-3.4.6-4.1
compat-gcc-34-c++-3.4.6-4.1
gcc-4.1.2-50.el5
gcc-c++-4.1.2-50.el5
pdksh-5.2.14-36.el5
openmotif-2.3.1-5.el5_5.1
openmotif-2.3.1-5.el5_5.1
sysstat-7.0.2-3.el5_5.1
2、域名解析设置及网络配置
[root@localhost CentOS]# vi /etc/hosts
127.0.0.1 localhost.localdomain localhost
::1 localhost6.localdomain6localhost6
192.168.56.103 hyl
[root@localhost CentOS]# vi/etc/sysconfig/network-scripts/ifcfg-eth0
# Intel Corporation 82540EM Gigabit Ethernet Controller
DEVICE=eth0
BOOTPROTO=static
IPADDR=192.168.56.103
NETMASK=255.255.255.0
HWADDR=08:00:27:29:DB:B2
ONBOOT=yes
[root@localhost CentOS]# service network restart
正在关闭接口 eth0： [确定]
关闭环回接口： [确定]
禁用 IPv4 包转送：net.ipv4.ip_forward = 0
弹出环回接口： [确定]
弹出界面 eth0： [确定]
[root@localhost CentOS]# vi /etc/sysconfig/network
NETWORKING=yes
NETWORKING_IPV6=no
#HOSTNAME=localhost.localdomain
HOSTNAME=hyl
[root@localhost CentOS]# su -
3、创建用户、组
[root@hyl ~]# groupadd oinstall
[root@hyl ~]# groupadd dba
[root@hyl ~]# useradd -g oinstall -G dba oracle
[root@hyl ~]# passwd oracle
Changingpassword for user oracle.
New UNIXpassword: oracle
BADPASSWORD: it is based on a dictionary word
Retypenew UNIX password: oracle
passwd:all authentication tokens updated successfully.
[root@hyl ~]# id oracle
uid=501(oracle)gid=501(oinstall) groups=501(oinstall),502(dba)
4、配置内核参数、修改环境变量
[root@hyl ~]# vi /etc/sysctl.conf
kernel.shmall =
kernel.shmmni = 4096
kernel.sem = 250 8
fs.file-max = 65536
net.ipv4.ip_local_port_range =
net.core.rmem_default = 4194304
net.core.wmem_default = 262144
net.core.rmem_max = 4194304
net.core.wmem_max = 262144
&/etc/sysctl.conf& 43L, 1228C written
[root@hyl ~]# sysctl -p
net.ipv4.ip_forward= 0
net.ipv4.conf.default.rp_filter= 1
net.ipv4.conf.default.accept_source_route= 0
kernel.sysrq= 0
kernel.core_uses_pid= 1
net.ipv4.tcp_syncookies= 1
kernel.msgmnb= 65536
kernel.msgmax= 65536
kernel.shmmax=
kernel.shmall=
kernel.shmmni= 4096
kernel.sem= 250 8
fs.file-max= 65536
net.ipv4.ip_local_port_range=
net.core.rmem_default= 4194304
net.core.wmem_default= 262144
net.core.rmem_max= 4194304
net.core.wmem_max= 262144
--修改oracle用户的环境配置文件
--执行：su - oracle切换到oracle用户环境，然后编辑 .bash_profile文件，更改PATH的配置，同时在环境变量中增加NLS_LANG的配置
[root@hyl yum.repos.d]# su - oracle
[oracle@hyl ~]$ vi .bash_profile
ORACLE_BASE=/home/u01/app/oracle
ORACLE_HOME=$ORACLE_BASE/product/10.2.0/db_1
ORACLE_SID=xcky
PATH=$PATH:$HOME/bin:$ORACLE_HOME/bin
LD_LIBRARY_PATH=$ORACLE_HOME/lib:/usr/lib
export ORACLE_BASE ORACLE_HOME ORACLE_SID PATH LD_LIBRARY_PATH
5、设置 shell 限制
--添加以下参数
[root@hyl ~]# vi /etc/security/limits.conf
oracle soft nproc 2047
oracle hard nproc 16384
oracle soft nofile 1024
oracle hard nofile 65536
[root@hyl ~]# vi /etc/pam.d/login
--添加以下参数
session required /lib/security/pam_limits.so
session required pam_limits.so
[root@hyl ~]# vi /etc/profile --添加以下参数
if [ $USER = &oracle& ]; then
if [ $SHELL =&/bin/ksh& ]; then
ulimit -p 16384
ulimit -n 65536
ulimit -u 16384-n 65536
--在/etc/profile文件中修改以下内容
ulimit &s &c 0 &/dev/null 2& &1 修改为
ulimit &s &c unlimited &/dev/null 2& &1
6、创建相关目录、赋权
[root@hyl ~]# mkdir -p /home/u01/app/oracle
[root@hyl ~]# mkdir -p /home/u01/app/oracle/oraInventory
[root@hyl ~]# chown -R oracle:oinstall /home/u01/app/oracle
[root@hyl ~]# chmod -R 775 /home/u01/app/oracle
[oracle@hyl home]# mkdir -p /home/oracle/downloads
[root@hyl ~]# chown -R oracle:oinstall /home/oracle/downloads
--上传安装包
[root@hyl downloads]# zcat 10201_database_linux_x86_64.cpio.gz |cpio -idmv & /dev/null 2&&1 --上传安装包后，解压安装包
[root@hyl install]# vi/home/oracle/downloads/database/install/oraparam.ini
--添加redhat-5如下所示
[Certified Versions]
=redhat-5,redhat-3,SuSE-9,redhat-4,UnitedLinux-1.0,asianux-1,asianux-2
7、远程图形化安装 Oracle 软件
--使用X-manager软件调用图形化界面，操作参考如下
$./runInstaller -X-manager下执行，出现乱码问题
--以下解决乱码问题
[root@hyl ~]# vi /etc/sysconfig/i18n
LANG=&en_US.UTF-8&
#LANG=&zh_CN.UTF-8&
--按参看下图，输入export指令
--安装过程报错：Errorinvoking target &install& of makefile
--修改：以下报错皆为第一次缺失包情况，若按上文修改后文档安装包，将不会出现如下报错
--保留报错截图，引以为戒
--rpm安装缺失的包
[root@hyl CentOS]# find -name &compat-libstdc*&
./compat-libstdc++-296-2.96-138.i386.rpm
./compat-libstdc++-33-3.2.3-61.x86_64.rpm
./compat-libstdc++-33-3.2.3-61.i386.rpm
[root@hyl CentOS]# rpm -ivh compat-libstdc++-296-2.96-138.i386.rpm
warning:compat-libstdc++-296-2.96-138.i386.rpm: Header V3 DSA signature: NOKEY, key IDe8562897
error:failed to stat /media/CentOS_5.6_Final: 没有那个文件或目录
Preparing... ########################################### [100%]
1:compat-libstdc++-296 ###########################################[100%]
[root@hyl CentOS]# rpm -ivh compat-libstdc++-33-3.2.3-61.x86_64.rpm
warning:compat-libstdc++-33-3.2.3-61.x86_64.rpm: Header V3 DSA signature: NOKEY, key IDe8562897
error:failed to stat /media/CentOS_5.6_Final: 没有那个文件或目录
Preparing... ###########################################[100%]
packagecompat-libstdc++-33-3.2.3-61.x86_64 is already installed
[root@hyl CentOS]# rpm -ivh compat-libstdc++-33-3.2.3-61.i386.rpm
warning:compat-libstdc++-33-3.2.3-61.i386.rpm: Header V3 DSA signature: NOKEY, key IDe8562897
error:failed to stat /media/CentOS_5.6_Final: 没有那个文件或目录
Preparing... ########################################### [100%]
packagecompat-libstdc++-33-3.2.3-61.i386 is already installed
--尝试点击Retry继续
--再次报错：Error invokingtarget&agent nmo nmb&of makefile
--使用yum安装如下包
glib-devel-1.2.10-20.el5 (i386)
glib-devel-1.2.10-20.el5 (x86_64)
glibc-devel-2.5-81.el5_8.2 (x86_64)
glibc-devel-2.5-81.el5_8.2 (i386)
--尝试点击Retry继续
--再次报错，尝试点击&Continue&继续
[root@hyl ~]# /home/u01/app/oracle/oraInventory/orainstRoot.sh
Changingpermissions of /home/u01/app/oracle/oraInventory to 770.
Changinggroupname of /home/u01/app/oracle/oraInventory to oinstall.
Theexecution of the script is complete
[root@hyl ~]# /home/u01/app/oracle/product/10.2.0/db_1/root.sh
RunningOracle10 root.sh script...
Thefollowing environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /home/u01/app/oracle/product/10.2.0/db_1
Enterthe full pathname of the local bin directory: [/usr/local/bin]:
Copying dbhome to /usr/local/bin ...
Copying oraenv to /usr/local/bin ...
Copying coraenv to /usr/local/bin ...
Creating/etc/oratab file...
Entrieswill be added to the /etc/oratab file as needed by
DatabaseConfiguration Assistant when a database is created
Finishedrunning generic part of root.sh script.
Nowproduct-specific root actions will be performed.
--软件安装结束，由于过程中报错，软件安装可能不成功，尝试启动dbca
$dbca --X-manager下无法启动dbca
--删除/home/oracle下oracle安装文件，重新安装软件
--由于之前安装过程中，出现缺失包情况，重新查阅官方文档，重新安装和检查需要的包
--此时注意到安装包位数的区别，安装64位的安装包
[root@hyl ~]# yum -y install glibc-devel.i386 glibc-devel.x86_64compat-db.i386 compat-db.x86_64 compat-libstdc++-296.i386compat-libstdc++-33.i386 compat-libstdc++-33.x86_64
[root@hyl ~]# yum -y install compat-gcc-34.x86_64compat-gcc-34-c++.x86_64 gcc.x86_64 gcc-c++.x86_64 pdksh.x86_64 openmotif.i386openmotif.x86_64 sysstat.x86_64
--按照上文图形化安装oracle步骤，重新安装oracle软件，直到执行脚本界面弹出，此时只需跑一个脚本，如下图
[root@hyl /]# /home/u01/app/oracle/product/10.2.0/db_1/root.sh
RunningOracle10 root.sh script...
Thefollowing environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /home/u01/app/oracle/product/10.2.0/db_1
Enter thefull pathname of the local bin directory: [/usr/local/bin]:
The file&dbhome& already exists in /usr/local/bin. Overwrite it? (y/n)
Copying dbhome to /usr/local/bin ...
The file&oraenv& already exists in /usr/local/bin. Overwrite it? (y/n)
Copying oraenv to /usr/local/bin ...
The file&coraenv& already exists in /usr/local/bin. Overwrite it? (y/n)
Copying coraenv to /usr/local/bin ...
Entrieswill be added to the /etc/oratab file as needed by
DatabaseConfiguration Assistant when a database is created
Finishedrunning generic part of root.sh script.
Nowproduct-specific root actions will be performed.
--按提示，点击完成结束oracle软件的安装
--经验证，此次安装oracle软件成功，已经可以dbca建库
说明：有关dbca建库，请关注后续文章。
***********************************************声明************************************************
原创作品，出自 &深蓝的blog& 博客，欢迎转载，转载时请务必注明出处（http://blog.csdn.net/huangyanlong）。
表述有错误之处，请您留言，不胜感激。
提醒：点击目录，更有助于您的查看。
*****************************************************************************************************
您对本文章有什么意见或着疑问吗？请到您的关注和建议是我们前行的参考和动力&&
您的浏览器不支持嵌入式框架，或者当前配置为不显示嵌入式框架。