求助，lfs tar提示 磁盘空间不够 - 查看主题 & Ubuntu中文论坛
&[ 7 篇帖子 ]&
&文章标题 : 求助，lfs tar提示 磁盘空间不够发表于 :
15:30帖子: 4
送出感谢: 0 次
接收感谢: 0 次
按照经典教程贴：http://www.linuxsir.org/bbs/thread322894.html做到GCC-4.1.2 - Pass 1 这一步的时候，运行 代码:tar xvf /lfs-sources/gcc-4.1.2.tar.bz2,前面一切正常解压，突然提示代码:gcc-4.1.2/gcc/genconfig.cgcc-4.1.2/gcc/cgraphunit.ctar: gcc-4.1.2/gcc/cgraphunit.c: Wrote only 2048 of 10240 bytesgcc-4.1.2/gcc/regs.htar: gcc-4.1.2/gcc/regs.h: Cannot write: No space left on device之后，代码:root [ ~ ]# df -lhFilesystem& & & & & & Size& Used Avail Use% Mounted on/dev/mapper/lfs-cd& & 1.5G& 1.5G& & &0 100% //dev/sda2& & & & & & &7.5G& 304K& 7.5G& &1% /mnt/lfs如果直接用lfs用户去解压，直接提示代码:lfs:~$tar xvf /lfs-sources/gcc-4.1.2.tar.bz2gcc-4.1.2/gcc-4.1.2/gcc/gcc-4.1.2/gcc/diagnostic.deftar: gcc-4.1.2/gcc/diagnostic.def: Cannot write: No space left on devicegcc-4.1.2/gcc/cstamp-h.intar: gcc-4.1.2/gcc/cstamp-h.in: Cannot write: No space left on devicegcc-4.1.2/gcc/doc/gcc-4.1.2/gcc/doc/cppinternals.texitar: gcc-4.1.2/gcc/doc/cppinternals.texi: Cannot write: No space left on devicegcc-4.1.2/gcc/doc/collect2.texitar: gcc-4.1.2/gcc/doc/collect2.texi: Cannot write: No space left on devicegcc-4.1.2/gcc/doc/implement-c.texitar: gcc-4.1.2/gcc/doc/implement-c.texi: Cannot write: No space left on devicegcc-4.1.2/gcc/doc/sourcebuild.texi
20:34，总共编辑了 1 次
&文章标题 : Re: 求助，lfs tar 提示发表于 :
11:16帖子: 12522地址: 廣州
送出感谢: 0 次
引用:No space left on device
_________________^_^ ~~~要理解递归，首先要理解递归。地球人都知道，理论上，理论跟实际是没有差别的，但实际上，理论跟实际的差别是相当大滴。
&文章标题 : Re: 求助，lfs tar 提示发表于 :
15:30帖子: 4
送出感谢: 0 次
接收感谢: 0 次
BigSnake.NET 写道:引用:No space left on device看df那段。。 应该怎么做呢。。。
&文章标题 : Re: 求助，lfs tar 提示发表于 :
11:16帖子: 12522地址: 廣州
送出感谢: 0 次
你做lfs怎么不是在本地磁盘上做啊…… 看上去你在 livecd 的内存盘里做……
_________________^_^ ~~~要理解递归，首先要理解递归。地球人都知道，理论上，理论跟实际是没有差别的，但实际上，理论跟实际的差别是相当大滴。
&文章标题 : Re: 求助，lfs tar 提示发表于 :
11:16帖子: 12522地址: 廣州
送出感谢: 0 次
而且那帖子也太久了建议看官方的最新手册，建议做CLFS。
_________________^_^ ~~~要理解递归，首先要理解递归。地球人都知道，理论上，理论跟实际是没有差别的，但实际上，理论跟实际的差别是相当大滴。
&文章标题 : Re: 求助，lfs tar 提示发表于 :
15:30帖子: 4
送出感谢: 0 次
接收感谢: 0 次
BigSnake.NET 写道:你做lfs怎么不是在本地磁盘上做啊…… 看上去你在 livecd 的内存盘里做……那怎么样才能在本地做呢，我也想。。 是人家推荐做lfs的。。。。
&文章标题 : Re: 求助，lfs tar 提示发表于 :
15:30帖子: 4
送出感谢: 0 次
接收感谢: 0 次
BigSnake.NET 写道:你做lfs怎么不是在本地磁盘上做啊…… 看上去你在 livecd 的内存盘里做……用时光机回到了1小时前，发现代码:root [ ~ ]# df -lhFilesystem& & & & & & Size& Used Avail Use% Mounted on/dev/mapper/lfs-cd& & 1.5G& 1.3G& 199M& 87% //dev/sda2& & & & & & &7.5G& 304K& 7.5G& &1% /mnt/lfs蛇蛇你说的是对滴似乎，但lfs-cd不是光盘么 他怎么能。。那现在应该怎么操作呢，还是只能干掉从来
不许再说cfls！
显示帖子 : 全部帖子1天7天2周1个月3个月6个月1年&排序 作者发表时间文章标题 升序降序&
&[ 7 篇帖子 ]&
正在浏览此版面的用户：没有注册用户 和 2 位游客
您 不能 在这个版面发表主题您 不能 在这个版面回复主题您 不能 在这个版面编辑帖子您 不能 在这个版面删除帖子您 不能 在这个版面提交附件
选择一个版面
------------------
公告/注意事项
& &新闻和通知
& &校园社团支持
& && &华东校区
& && &华南校区
& && &华北校区
& && &华中校区
& && &东北校区
& && &西北校区
& && &港澳台校区
& && &国外校区
& &软件推荐
& &非常任务
系统安装区
& &教学和常见问答
& && &课堂教学和培训
& &初学者园地 - 15.10
& &系统安装和升级
& && &新立得和软件源
& && &Wubi安装讨论
& &启动和引导
& &网卡问题以及网络和拨号
& && &校园网拨号
& &笔记本、UMPC支持
& &手机和平板
& && &Ubuntu移动应用开发
& &常用硬件支持
& &系统架构支持
配置美化区
& &字体美化和中文支持
& && &个人配置文件存放点
& &桌面特效
& &窗口管理器
& &屏幕抓图
& &办公、图像、机械电子设计等
& && &Vim和Emacs
& &因特网相关软件
& &影音多媒体
& &Wine及其分支
& &游戏和游戏模拟器
& &虚拟机和虚拟化
& &其它类软件
& &开源模板库
服务器管理
& &服务器基础应用
& &数据库管理
& &服务器维护和硬件相关
& &Ubuntu VPS
参与Ubuntu开发
& &软件和文档翻译
& &编译或打包
& &Ubuntu错误报告
程序设计区
& &Shell脚本
& &GTK+和QT
& &软件/网站开发
& && &Python/Php/Perl
& && &C/C++/Java
& &内核及嵌入式开发
& &开源小工具
& &Ubuntu 16.04
& &Ubuntu 14.10
& &Ubuntu 14.04 LTS
& &Ubuntu 12.04 LTS
& &Ubuntu 10.04 LTS
& &老旧版本支持
& && &Ubuntu 15.04
衍生发行版
& &Ubuntu GNOME
& &Kubuntu
& &Xubuntu & Lubuntu
& &Ubuntu中文衍生版
& && &Deepin
& && &UbuntuKylin
& &Ubuntu国外衍生版
& && &Mint
& &Ubuntu衍生版制作
& &其它类Unix OS发行版
& && &Arch发行版
& && &Debian发行版
& && &OpenSUSE发行版
& &深度PK版
& &Ubuntu故事和感慨
& &Full Circle开源杂志
分享交流区
& &同城交流
& &线下活动专版
& &Ubuntu宣传推广
& &论坛管理
& && && &Ubuntu中文网上商店求s2解锁器_lfs吧_百度贴吧
&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&签到排名：今日本吧第个签到，本吧因你更精彩，明天继续来努力！
本吧签到人数：0可签7级以上的吧50个
本月漏签0次！成为超级会员，赠送8张补签卡连续签到：天&&累计签到：天超级会员单次开通12个月以上，赠送连续签到卡3张
关注：2,476贴子：
求s2解锁器
换了一台电脑求解锁器呀，谢谢各位大神
手感太棒了！手感太棒了...
就在三星gear manager里...
船来了，神舟z6 s2
行货全新箱说票全
如题，准备把暗黑换成s2...
用100%成功的，算上手续...
没低段的....
华仲师兄镇楼
请看置顶帖
去lfs官网下个0.6h吧，0.6b的解锁可能会显示主管服务器未响应
内&&容:使用签名档&&
保存至快速回贴跪求LFS《速度生活》破解解锁办法，不要只给个网站，需要具体步骤。谢谢大家！_百度知道
跪求LFS《速度生活》破解解锁办法，不要只给个网站，需要具体步骤。谢谢大家！
本人分不多，然后怎么做.谢谢了.，知情的朋友最好告诉我去那里下载别人总是给 中国模拟赛车联合车会 的网站..
我有更好的答案
破解是有针对性的
现在LFS有很多版本
目前大多数都为Z版
都联机玩的 你最好知道一下你LFS的游戏版本
因为现在除了Z版
别的版本破解很难找
其他类似问题
为您推荐：
速度生活的相关知识
等待您来回答
下载知道APP
随时随地咨询
出门在外也不愁LFS下ALSA安装求助
LFS下ALSA安装求助
[font color=red]我的ALSA安装不成功，请看最新回复[/font]
今天我得我以前编译的LFS6.2宿主系统上，
根据CLFS－1.1.0的文档编译CLFS，走到了5.4.1这一步，
执行make ARCH=i386 headers_check
提示好多出错。
CHK include/linux/version.h
HOSTCC scripts/basic/fixdep
In file included from scripts/basic/fixdep.c:107:
/usr/include/sys/types.h:27:22: error: features.h: No such file or directory
In file included from /usr/include/bits/types.h:31,
from /usr/include/sys/types.h:31,
from scripts/basic/fixdep.c:107:
/usr/lib/gcc/i686-pc-linux-gnu/4.0.3/include/stddef.h:214: error: syntax error before 'typedef'
/usr/include/sys/types.h:133:18: error: time.h: No such file or directory
/usr/include/sys/types.h:158:20: error: missing binary operator before token &(&
In file included from scripts/basic/fixdep.c:108:
/usr/include/sys/stat.h:103: error: syntax error before '__BEGIN_DECLS'
In file included from /usr/include/sys/stat.h:105,
from scripts/basic/fixdep.c:108:
/usr/include/bits/stat.h:36: error: syntax error before 'struct'
In file included from scripts/basic/fixdep.c:108:
/usr/include/sys/stat.h:208: error: syntax error before '__THROW'
/usr/include/sys/stat.h:212: error: syntax error before '__THROW'
/usr/include/sys/stat.h:257: error: syntax error before '__THROW'
/usr/include/sys/stat.h:275: error: syntax error before '__THROW'
/usr/include/sys/stat.h:285: error: syntax error before '__THROW'
/usr/include/sys/stat.h:298: error: syntax error before '__THROW'
/usr/include/sys/stat.h:325: error: syntax error before '__THROW'
/usr/include/sys/stat.h:327: error: syntax error before '__THROW'
/usr/include/sys/stat.h:329: error: syntax error before '__THROW'
/usr/include/sys/stat.h:358: error: syntax error before '__THROW'
/usr/include/sys/stat.h:364: error: syntax error before '(' token
/usr/include/sys/stat.h:378: error: syntax error before '(' token
In file included from scripts/basic/fixdep.c:109:
/usr/include/sys/mman.h:58: error: syntax error before 'extern'
/usr/include/sys/mman.h:59: error: syntax error before '__THROW'
/usr/include/sys/mman.h:77: error: syntax error before '__THROW'
/usr/include/sys/mman.h:82: error: syntax error before '__THROW'
/usr/include/sys/mman.h:104: error: syntax error before '__THROW'
/usr/include/sys/mman.h:107: error: syntax error before '__THROW'
/usr/include/sys/mman.h:112: error: syntax error before '__THROW'
/usr/include/sys/mman.h:116: error: syntax error before '__THROW'
scripts/basic/fixdep.c:110:20: error: unistd.h: No such file or directory
scripts/basic/fixdep.c:111:19: error: fcntl.h: No such file or directory
scripts/basic/fixdep.c:112:20: error: string.h: No such file or directory
scripts/basic/fixdep.c:113:20: error: stdlib.h: No such file or directory
scripts/basic/fixdep.c:114:19: error: stdio.h: No such file or directory
In file included from /usr/lib/gcc/i686-pc-linux-gnu/4.0.3/include/syslimits.h:7,
from /usr/lib/gcc/i686-pc-linux-gnu/4.0.3/include/limits.h:11,
from scripts/basic/fixdep.c:115:
/usr/lib/gcc/i686-pc-linux-gnu/4.0.3/include/limits.h:122:61: error: limits.h: No such file or directory
scripts/basic/fixdep.c:116:19: error: ctype.h: No such file or directory
In file included from /usr/include/arpa/inet.h:23,
from scripts/basic/fixdep.c:117:
/usr/include/netinet/in.h:23:20: error: stdint.h: No such file or directory
In file included from /usr/include/netinet/in.h:24,
from /usr/include/arpa/inet.h:23,
from scripts/basic/fixdep.c:117:
/usr/include/sys/socket.h:25: error: syntax error before '__BEGIN_DECLS'
In file included from /usr/include/sys/uio.h:29,
from /usr/include/sys/socket.h:27,
from /usr/include/netinet/in.h:24,
from /usr/include/arpa/inet.h:23,
from scripts/basic/fixdep.c:117:
/usr/include/bits/uio.h:42: error: syntax error before 'struct'
In file included from /usr/include/sys/socket.h:35,
from /usr/include/netinet/in.h:24,
from /usr/include/arpa/inet.h:23,
from scripts/basic/fixdep.c:117:
/usr/include/bits/socket.h:36: error: syntax error before 'typedef'
In file included from /usr/include/sys/socket.h:35,
from /usr/include/netinet/in.h:24,
from /usr/include/arpa/inet.h:23,
from scripts/basic/fixdep.c:117:
/usr/include/bits/socket.h:237: error: syntax error before '__flexarr'
/usr/include/bits/socket.h:258: error: syntax error before '__THROW'
In file included from /usr/include/netinet/in.h:24,
from /usr/include/arpa/inet.h:23,
from scripts/basic/fixdep.c:117:
/usr/include/sys/socket.h:65:43: error: missing binary operator before token &(&
In file included from /usr/include/netinet/in.h:24,
from /usr/include/arpa/inet.h:23,
from scripts/basic/fixdep.c:117:
/usr/include/sys/socket.h:100: error: syntax error before '__THROW'
/usr/include/sys/socket.h:107: error: syntax error before '__THROW'
/usr/include/sys/socket.h:111: error: syntax error before '__THROW'
/usr/include/sys/socket.h:115: error: syntax error before '__THROW'
/usr/include/sys/socket.h:129: error: syntax error before '__THROW'
/usr/include/sys/socket.h:187: error: syntax error before '__THROW'
/usr/include/sys/socket.h:193: error: syntax error before '__THROW'
/usr/include/sys/socket.h:199: error: syntax error before '__THROW'
/usr/include/sys/socket.h:218: error: syntax error before '__THROW'
In file included from /usr/include/arpa/inet.h:23,
from scripts/basic/fixdep.c:117:
/usr/include/netinet/in.h:28: error: syntax error before '__BEGIN_DECLS'
/usr/include/netinet/in.h:31: error: syntax error before 'enum'
/usr/include/netinet/in.h:92: error: syntax error before 'in_port_t'
/usr/include/netinet/in.h:136: error: syntax error before 'in_addr_t'
/usr/include/netinet/in.h:139: error: syntax error before 'in_addr_t'
/usr/include/netinet/in.h:197: error: syntax error before 'uint8_t'
/usr/include/netinet/in.h:199: error: syntax error before 'u6_addr32'
/usr/include/netinet/in.h:200: error: syntax error before '}' token
/usr/include/netinet/in.h:204: error: syntax error before '}' token
/usr/include/netinet/in.h:222: error: syntax error before 'in_port_t'
/usr/include/netinet/in.h:229: error: invalid application of 'sizeof' to incomplete type 'struct in_addr'
/usr/include/netinet/in.h:230: error: syntax error before '}' token
/usr/include/netinet/in.h:236: error: syntax error before 'in_port_t'
/usr/include/netinet/in.h:239: error: syntax error before 'sin6_scope_id'
/usr/include/netinet/in.h:247: error: field 'imr_multiaddr' has incomplete type
/usr/include/netinet/in.h:250: error: field 'imr_interface' has incomplete type
/usr/include/netinet/in.h:256: error: field 'imr_multiaddr' has incomplete type
/usr/include/netinet/in.h:259: error: field 'imr_interface' has incomplete type
/usr/include/netinet/in.h:262: error: field 'imr_sourceaddr' has incomplete type
/usr/include/netinet/in.h:269: error: field 'ipv6mr_multiaddr' has incomplete type
/usr/include/netinet/in.h:280: error: syntax error before 'uint32_t'
/usr/include/netinet/in.h:284: error: syntax error before '}' token
/usr/include/netinet/in.h:289: error: syntax error before 'uint32_t'
/usr/include/netinet/in.h:296: error: syntax error before '}' token
/usr/include/netinet/in.h:303: error: field 'imsf_multiaddr' has incomplete type
/usr/include/netinet/in.h:306: error: field 'imsf_interface' has incomplete type
/usr/include/netinet/in.h:309: error: syntax error before 'uint32_t'
/usr/include/netinet/in.h:314: error: array type has incomplete element type
/usr/include/netinet/in.h:315: error: syntax error before '}' token
/usr/include/netinet/in.h:324: error: syntax error before 'uint32_t'
/usr/include/netinet/in.h:330: error: syntax error before 'gf_fmode'
/usr/include/netinet/in.h:333: error: syntax error before 'gf_numsrc'
/usr/include/netinet/in.h:336: error: syntax error before '}' token
In file included from /usr/include/netinet/in.h:345,
from /usr/include/arpa/inet.h:23,
from scripts/basic/fixdep.c:117:
/usr/include/bits/in.h:84: error: field 'ip_dst' has incomplete type
/usr/include/bits/in.h:91: error: field 'imr_multiaddr' has incomplete type
/usr/include/bits/in.h:92: error: field 'imr_address' has incomplete type
/usr/include/bits/in.h:100: error: field 'ipi_spec_dst' has incomplete type
/usr/include/bits/in.h:101: error: field 'ipi_addr' has incomplete type
In file included from /usr/include/arpa/inet.h:23,
from scripts/basic/fixdep.c:117:
/usr/include/netinet/in.h:354: error: syntax error before 'ntohl'
/usr/include/netinet/in.h:354: error: syntax error before '__netlong'
/usr/include/netinet/in.h:355: error: syntax error before 'ntohs'
/usr/include/netinet/in.h:355: error: syntax error before '__netshort'
/usr/include/netinet/in.h:357: error: syntax error before 'htonl'
/usr/include/netinet/in.h:357: error: syntax error before '__hostlong'
/usr/include/netinet/in.h:359: error: syntax error before 'htons'
/usr/include/netinet/in.h:359: error: syntax error before '__hostshort'
In file included from /usr/include/arpa/inet.h:23,
from scripts/basic/fixdep.c:117:
/usr/include/netinet/in.h:362:20: error: endian.h: No such file or directory
In file included from /usr/include/arpa/inet.h:23,
from scripts/basic/fixdep.c:117:
/usr/include/netinet/in.h:428: error: syntax error before '__THROW'
/usr/include/netinet/in.h:432: error: syntax error before '__THROW'
/usr/include/netinet/in.h:458: error: field 'ipi6_addr' has incomplete type
In file included from scripts/basic/fixdep.c:117:
/usr/include/arpa/inet.h:31: error: syntax error before '__BEGIN_DECLS'
/usr/include/arpa/inet.h:35: error: syntax error before 'extern'
/usr/include/arpa/inet.h:35: error: syntax error before '__THROW'
/usr/include/arpa/inet.h:38: error: syntax error before 'inet_lnaof'
/usr/include/arpa/inet.h:38: error: syntax error before '__THROW'
/usr/include/arpa/inet.h:42: error: syntax error before '__net'
/usr/include/arpa/inet.h:46: error: syntax error before 'inet_netof'
/usr/include/arpa/inet.h:46: error: syntax error before '__THROW'
/usr/include/arpa/inet.h:50: error: syntax error before 'inet_network'
/usr/include/arpa/inet.h:50: error: syntax error before '__THROW'
/usr/include/arpa/inet.h:54: error: syntax error before '__THROW'
/usr/include/arpa/inet.h:60: error: syntax error before '__THROW'
/usr/include/arpa/inet.h:67: error: syntax error before '__THROW'
scripts/basic/fixdep.c:124: error: syntax error before 'char'
scripts/basic/fixdep.c: In function 'usage':
scripts/basic/fixdep.c:131: warning: implicit declaration of function 'fprintf'
scripts/basic/fixdep.c:131: warning: incompatible implicit declaration of built-in function 'fprintf'
scripts/basic/fixdep.c:131: error: 'stderr' undeclared (first use in this function)
scripts/basic/fixdep.c:131: error: (Each undeclared identifier is reported only once
scripts/basic/fixdep.c:131: error: for each function it appears in.)
scripts/basic/fixdep.c:132: warning: implicit declaration of function 'exit'
scripts/basic/fixdep.c:132: warning: incompatible implicit declaration of built-in function 'exit'
scripts/basic/fixdep.c: In function 'print_cmdline':
scripts/basic/fixdep.c:140: warning: implicit declaration of function 'printf'
scripts/basic/fixdep.c:140: warning: incompatible implicit declaration of built-in function 'printf'
scripts/basic/fixdep.c: In function 'grow_config':
scripts/basic/fixdep.c:156: warning: implicit declaration of function 'realloc'
scripts/basic/fixdep.c:156: warning: assignment makes pointer from integer without a cast
scripts/basic/fixdep.c:158: warning: implicit declaration of function 'perror'
scripts/basic/fixdep.c:158: warning: incompatible implicit declaration of built-in function 'exit'
scripts/basic/fixdep.c: In function 'is_defined_config':
scripts/basic/fixdep.c:174: warning: implicit declaration of function 'memcmp'
scripts/basic/fixdep.c: In function 'define_config':
scripts/basic/fixdep.c:187: warning: implicit declaration of function 'memcpy'
scripts/basic/fixdep.c:187: warning: incompatible implicit declaration of built-in function 'memcpy'
scripts/basic/fixdep.c: In function 'use_config':
scripts/basic/fixdep.c:206: error: 'PATH_MAX' undeclared (first use in this function)
scripts/basic/fixdep.c:214: warning: incompatible implicit declaration of built-in function 'memcpy'
scripts/basic/fixdep.c:220: warning: implicit declaration of function 'tolower'
scripts/basic/fixdep.c:222: warning: incompatible implicit declaration of built-in function 'printf'
scripts/basic/fixdep.c:206: warning: unused variable 's'
scripts/basic/fixdep.c: In function 'parse_config_file':
scripts/basic/fixdep.c:244: warning: implicit declaration of function 'isalnum'
scripts/basic/fixdep.c: In function 'strrcmp':
scripts/basic/fixdep.c:261: warning: implicit declaration of function 'strlen'
scripts/basic/fixdep.c:261: warning: incompatible implicit declaration of built-in function 'strlen'
scripts/basic/fixdep.c: In function 'do_config_file':
scripts/basic/fixdep.c:276: warning: implicit declaration of function 'open'
scripts/basic/fixdep.c:276: error: 'O_RDONLY' undeclared (first use in this function)
scripts/basic/fixdep.c:278: warning: incompatible implicit declaration of built-in function 'fprintf'
scripts/basic/fixdep.c:278: error: 'stderr' undeclared (first use in this function)
scripts/basic/fixdep.c:280: warning: incompatible implicit declaration of built-in function 'exit'
scripts/basic/fixdep.c:282: warning: implicit declaration of function 'fstat'
scripts/basic/fixdep.c:284: warning: implicit declaration of function 'close'
scripts/basic/fixdep.c:287: warning: implicit declaration of function 'mmap'
scripts/basic/fixdep.c:287: warning: assignment makes pointer from integer without a cast
scripts/basic/fixdep.c:296: warning: implicit declaration of function 'munmap'
scripts/basic/fixdep.c: In function 'parse_dep_file':
scripts/basic/fixdep.c:306: error: 'PATH_MAX' undeclared (first use in this function)
scripts/basic/fixdep.c:308: warning: implicit declaration of function 'strchr'
scripts/basic/fixdep.c:308: warning: incompatible implicit declaration of built-in function 'strchr'
scripts/basic/fixdep.c:310: warning: incompatible implicit declaration of built-in function 'fprintf'
scripts/basic/fixdep.c:310: error: 'stderr' undeclared (first use in this function)
scripts/basic/fixdep.c:311: warning: incompatible implicit declaration of built-in function 'exit'
scripts/basic/fixdep.c:313: warning: incompatible implicit declaration of built-in function 'memcpy'
scripts/basic/fixdep.c:314: warning: incompatible implicit declaration of built-in function 'printf'
scripts/basic/fixdep.c:306: warning: unused variable 's'
scripts/basic/fixdep.c: In function 'print_deps':
scripts/basic/fixdep.c:347: error: 'O_RDONLY' undeclared (first use in this function)
scripts/basic/fixdep.c:349: warning: incompatible implicit declaration of built-in function 'fprintf'
scripts/basic/fixdep.c:349: error: 'stderr' undeclared (first use in this function)
scripts/basic/fixdep.c:351: warning: incompatible implicit declaration of built-in function 'exit'
scripts/basic/fixdep.c:355: warning: incompatible implicit declaration of built-in function 'fprintf'
scripts/basic/fixdep.c:359: warning: assignment makes pointer from integer without a cast
scripts/basic/fixdep.c: In function 'traps':
scripts/basic/fixdep.c:378: warning: incompatible implicit declaration of built-in function 'fprintf'
scripts/basic/fixdep.c:378: error: 'stderr' undeclared (first use in this function)
scripts/basic/fixdep.c:380: warning: incompatible implicit declaration of built-in function 'exit'
make[1]: *** [scripts/basic/fixdep] Error 1
make: *** [scripts_basic] Error 2
我的系统缺什么？
这个lfs6.2我一直用得很好的。
昵称: zhfg &时间:
HOSTCC scripts/basic/fixdep
In file included from scripts/basic/fixdep.c:107:
/usr/include/sys/types.h:27:22: error: features.h: No such file or directory
宿主没有这些文件，您原来的宿主安装有问题。
昵称: 聚焦深空 &时间:
昵称: zhfg &时间:
昵称: d00m3d &时间:
昵称: zhfg &时间:
昵称: zhfg &时间:
昵称: zhfg &时间:
昵称: d00m3d &时间:
作者: d00m3d
這些問題是解決不了的，繼續做吧
谢谢楼上。
已经在继续了。进行到 bison一节。
昵称: zhfg &时间:
昵称: zhfg &时间:
昵称: 聚焦深空 &时间:
作者: zhfg
编译LFS系统完成，
又有了新的问题：
在LFS下编译ALSA，弄了两天了，出不了声音，连问题出在哪里也不知道。
现象如下：
我用的是1.0.19版
安装完ALSA－LIB，ALSA－DRIVERS，ALSA－UTILS三个包以,重新启动，用lsmod查看系统加载的模块，显示如下：
Module Size Used by
snd_intel8x0 33692 0
snd_ac97_codec 99236 1 snd_intel8x0
ac97_bus 2432 1 snd_ac97_codec
snd_pcm 71176 2 snd_intel8x0,snd_ac97_codec
snd_timer 21892 1 snd_pcm
snd 54436 4 snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
yenta_socket 25996 0
rsrc_nonstatic 11264 1 yenta_socket
pcmcia_core 38032 2 yenta_socket,rsrc_nonstatic
soundcore 7520 1 snd
intelfb 37412 0
8139cp 21120 0
8139too 23680 0
rng_core 5252 0
snd_page_alloc 11400 2 snd_intel8x0,snd_pcm
intel_agp 23956 1
上面的信息不是说明声音模块已加载吗？
用MPLAYER播放音乐，出现如下提示。
MPlayer 1.0rc2-4.1.2 (C)
MPlayer Team
CPU: Intel(R) Celeron(R) M processor 1.30GHz (Family: 6, Model: 13, Step
CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Compiled for x86 CPU with extensions: MMX MMX2 SSE SSE2
Playing /mnt/hda6/sources/temp.mp3.
Audio file file format detected.
Clip info:
Title: 心跳
Artist: 王力宏
Genre: Unknown
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
AUDIO: 44100 Hz, 2 ch, s16le, 192.0 kbit/13.61% (ratio: 2)
Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
[AO OSS] audio_setup: Can't open audio device /dev/dsp: No such file or director
AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample)
Video: no video
Starting playback...
A: 0.1 (00.1) of 252.0 (04:12.0) ??,?%
A: 0.3 (00.2) of 252.0 (04:12.0) ??,?%
A: 0.5 (00.5) of 252.0 (04:12.0) 1.4%
A: 0.6 (00.6) of 252.0 (04:12.0) 1.4%
A: 0.9 (00.8) of 252.0 (04:12.0) 1.4%
A: 1.0 (01.0) of 252.0 (04:12.0) 1.4%
Volume: 100 %
A: 1.5 (01.5) of 252.0 (04:12.0) 1.4%
A: 1.6 (01.6) of 252.0 (04:12.0) 1.4%
A: 1.9 (01.8) of 252.0 (04:12.0) 1.4%
A: 2.0 (02.0) of 252.0 (04:12.0) 1.4%
A: 2.3 (02.2) of 252.0 (04:12.0) 1.4%
A: 2.4 (02.4) of 252.0 (04:12.0) 1.4%
A: 2.7 (02.6) of 252.0 (04:12.0) 1.4%
A: 2.8 (02.7) of 252.0 (04:12.0) 1.4%
上面的信息不是说明已经打开声音设备了吗？
ALSAMIXER里面我打开了＜MASTER＞＜MASTER M＞＜PCM＞＜IEC P＞
我不太明白ALSA的配置，哪位兄弟看看我的系统到底怎么了?
期待解决啊！！！
先保证内核alsa驱动配置没问题，然后用alsaconf来配置一下看看。
其次，alsa-driver不用额外安装，内核自带，使用高版本的内核，alsa驱动也很高。
昵称: Dennis.Wang &时间:
昵称: zhfg &时间:
作者: 聚焦深空
新问题，请开新贴。
0、内核中的 alsa 已满足大部分硬件，alsa-lib、alsa-utils 足矣。
1、需要 alsa-driver 提供的 snddevices 或 udev 设置声卡设备文件。
2、alsa 默认静音。
blfs 有 alsa 详细配置，包括相关 udev 配置、启动脚本，请移步。
这种级别的问题自己解决不了，也不会找答案，请考虑清楚是否应先用其他发行版。
首先感谢您的回答，我用lfs的原因就是想学习LINUX， 具体说就是学习linux的系统配置和系统中各文件的组织方式以及之间的联系。
我也用过其它的发行版，如：fc, ubuntu，不过我发现它们用起来是好，可是它们的配置文件的安排都自成一家。很多配置文件，不同的发行版都会安排在不同的位置。学习起来没有体系。
之所以发在这里是因为别的版块解决问题都是用atp-get,yun等方法，我是菜鸟，而我不想学习这种方法。还请多多关照啊！
您能跟我说说声音设备文件是怎么回事吗？ snddevices和UDEV对应的声音设备文件是什么？
alsa安装后/etc/asound.state文件是干什么用的？
还有~/.alsa.conf /usr/share/alsa下的各文件,它们都是干什么用的？文件的编写都是什么规则？
期待您的回帖。
昵称: zhfg &时间:
昵称: zhfg &时间:
作者: zhfg
哎 alsaconf还要装which和dialog
好吧，今天下班回去装上试试。
老兄，现搞好没？提供下资料呀，偶多谢！！
昵称: bingdian304 &时间:
昵称: zhfg &时间:
昵称: bingdian304 &时间: