& 359,327 Results
Supplier Location:
Supplier Types:
Minimum Order:
10 Tons (Min. Order)
170 Kilograms (Min. Order)
US $0.45-15 / Meter
500 Meters (Min. Order)
US $0.5-1.5 / Piece
3000 Cartons (Min. Order)
US $5-16 / Acre
200 Pieces (Min. Order)
US $500-5000 / Ton
1 Ton (Min. Order)
US $2-5 / Kilogram
1 Kilogram (Min. Order)
1 Twenty-Foot Container (Min. Order)
US $1-10 / Kilogram
1500 Kilograms (Min. Order)
US $15-65 / Barrel
100 Barrels (Min. Order)
US $500-5000 / Ton
US $1.3-2.3 / Liter
1 Liter (Min. Order)
1 Twenty-Foot Container (Min. Order)
US $1.125-1.14 / Liter
1 Twenty-Foot Container (Min. Order)
US $0.8-1.2 / Metric Ton
1 Metric Ton (Min. Order)
US $ / Metric Ton
1 Metric Ton (Min. Order)
200 Pieces (Min. Order)
US $400-5500 / Metric Ton
1 Metric Ton (Min. Order)
US $430.0-430.0 / Barrels
5 Barrels (Min. Order)
10 Pallets (Min. Order)
US $2-4 / Liter
3000 Liters (Min. Order)
US $ / Ton
18 Tons (Min. Order)
US $0.0 / Ton
1 Ton (Min. Order)
20 Feet (Min. Order)
US $ / Ton
1 Ton (Min. Order)
US $400-500 / Barrel
1 Barrel (Min. Order)
20 Tons (Min. Order)
US $500-5000 / Ton
1 Metric Ton (Min. Order)
1 Kilogram (Min. Order)
1 Twenty-Foot Container (Min. Order)
US $1.75-2.25 / Liter
50 Cartons (Min. Order)
500 Cartons (Min. Order)
US $1-9 / Kilogram
20 Kilograms (Min. Order)
EUR 599-699 / Unit
1 Unit (Min. Order)
US $2-2.5 / Liter
208 Liters (Min. Order)
US $ / Metric Ton
1 Metric Ton (Min. Order)
Go to Page
AliSourcePro
Haven't found the right supplier yet ? Let matching verified suppliers find you.
Do you want to show hydraulic oil or other products of your own company?
Related Category
Product Features
Application
General Composition
Specification
Sample OrderNEW
Minimum Order:
Supplier Features
Supplier by Area
Suppliers by Country/Region
Supplier Types
Top 3 Markets
Total Revenue
Mgnt Certification
Recommendation for you
related suppliers
Trade tools
featured Chemicals
ensearchweb数控机床常用英语词汇_百度文库
两大类热门资源免费畅读
续费一年阅读会员，立省24元！
数控机床常用英语词汇
上传于||暂无简介
阅读已结束，如果下载本文需要使用0下载券
想免费下载更多文档？
定制HR最喜欢的简历
你可能喜欢Waterjet Intensifier Pumps
& Scroll down for information on various pump models &
Whatever your cutting application, there's a WARDJet HyPrecision intensifier pump designed to meet your needs. WARDJet offers a full range of reliable, efficient waterjet intensifier pumps for around-the-clock operations, small prototype jobs, and every application in between. You'll find pumps engineered to meet the demands of multiple head abrasive cutting, as well as those that are ideal for water-only cutting. All WARDJet pumps are engineered to be easy to operate - and even easier to maintain.
Read about the technology behind Intensifier Pumps in the .
WARDJet supplies parts for WARDJet waterjets and for most makes and models of waterjets.
HyPrecision Features:
WARDJet Control Center
A touch screen panel guides the operator through operation, troubleshooting, and maintenance logs. This lets you access the most powerful features and functions with the touch of a screen.
Built to Last
WARDJet brings decades of experience, rigorous research, and ongoing product development to everything we do. The combination of intelligent engineering and quality manufacturing add up to a pump that delivers maximum longevity and reliability.
Advanced Intensifier Technology(TM) (AIT)
AIT is our exclusive technology and an integral part of the HyPrecision pumps. Our unparalleled user-oriented innovations facilitate longer maintenance intervals and rapid component replacement.
Added Versatility
Equipped with high and low pressure settings (ideal for piercing brittle materials).
Enhanced Hydraulic Circuit
Kidney loop circulates oil through a heat exchanger and oil filter, away from intensifier pulsations. When the pump is in standby, the oil is cool. (Available on 50+hp pumps)
Efficient Pressure Generation
High efficiency TEFC motors deliver reliable power with minimal electric consumption. Wye-Delta soft start reduces inrush current for 50+ hp pumps.
Superior Cut Quality
Single large volume attenuator provides even output pressure to ensure optimal edge quality. Read more in the .
Smooth High Pressure Water
Pressure-Compensated hydraulic pumps and exclusive electronic shift technology maintain smooth ultra-high pressure water at the cutting heads.
Operation Convenience
Panel-mounted display pressure gauges allow easy monitoring of inlet water filters and hydraulic performance.
Maximum Cutting Performance
An inlet water filter system removes impurities to maximize cutting head performance. Boost pumps increase inlet water flow for 50+ HP pumps.
Remote Operation
Key switch enables all pump features to be operated and monitored at either the pump or remotely from a CNC controller.
Safe Operation
Safety dump valve relieves system pressure in case of a shutdown.
Only WARDJet offers ultra-high pressure pumps with Advanced Intensifier Technology (AIT). AIT represents the latest
in high pressure intensifier design that delivers increased reliability and efficiency.
Micro-SD Card Reader
Transfer pump maintenance and alarm logs quickly and easily.
Download the latest WARDJet system software updates.
More Intuitive Than Ever
Easy-to-understand graphics guide the operator through the steps necessary to operate and maintain the pump.
Password Protected
Protect your pump settings and configuration to prevent editing by unauthorized personnel.
Operation Made Easy
The Quick Help feature provides fast answers when they're needed most. No more searching through system manuals for basic information.
Optional Ethernet Interface
Transfer data between your WARDJet system and a network or PC. This option allows advanced remote control and remote troubleshooting.
Advanced Intensifier Management (AIM)
Built-in troubleshooting charts and detailed intensifier graphics provide rapid access to diagnostics and maintenance logs.
1 STREAMLINED MAINTENANCE
Check valve utilizes a screwless, low-pressure poppet design to enable quick evaluation of key contact surfaces. Feature allows for fast component replacement.
4 EXTENDED SEAL LIFE
Large diameter ceramic plunger produces more water per stroke with reduced friction yielding maximum seal life.
2 RELIABLE HIGH PRESSURE ENDS
Durable threaded rod design simplifies high pressure end removal for quick seal maintenance. Non-threaded cylinder design increases reliability.
5 IMPROVED COMPONENT LIFE
Hydraulic center section features an advanced piston design which minimizes seal wear and improves component life.
3 SIMPLIFYING ACCESS
The hydraulic rod seals and plunger bearing are readily accessed from the outside of the hydraulic end cap.
6 SMOOTH SHIFTING
Advanced electronics provide smooth, more reliable shifting for optimum cut quality. In addition shift times are monitored for intensifier performance.
HyPrecision 50 - 50hp (37kW)
Frequency (Hz)
Pump Power
Voltage (V)
208-230/460
Current (I)
137-124/63
Main C.B. Rating (I)
Soft Start
Pump Capabilities
Max. Continuous Output Pressure
60,000 psi (4,137 bar)
Min. Output Pressure
8,000 psi (552 bar)
Max. Output Flow gpm (lpm)
Max. Orifice (mm)
.014 (0.35)
Intensifer Configuration
Pressure Control
Dual Manual
Bleed Down Valve
External air over oil cooling
Chiller for oil cooling
Width, in (mm)
Length, in (mm)
Height, in (mm)
Clearance Height
80in (2.03m)
Operating Weight Approx.
2900lb (1315)
Ambient Conditions
Min. Storage Temp. (not drained)
35°F (1.7° C)
Min. Operation Temp.
40°F (4.4° C)
Max. Operating Temp.
95°F (35°C) Note: Higher temperature operation available with additional cooling package
Max. Relative Humidity
Inlet Cutting Water
Min. Inlet Water Pressure
40 psi (1.38 bar)
Max. Inlet Water Pressure
115 psi (7.72 bar)
Max. Inlet Temp.
70°F (21°C)
Min. Inlet Temp.
40°F (4.4° C)
Min. Inlet Flow Rate
Inlet Water Quality
See Water Quality Section
Hydraulic Cooling Water (if not air cooled)
Min. Inlet Water Pressure
40 psi (2.76 bar)
Max. Inlet Water Pressure
(See LP Water section)
115 psi (7.93 bar)
Max. Inlet Temp.
70°F (21°C)
Min. Inlet Temp.
40°F (4.4° C)
Normal Inlet Flow Rate
Hydraulics
Hydraulic Oil Type
ISO AW 32 or ISO AW 46 Mineral Oil
Hydraulic Oil Capacity
Max. Oil Temp.
130°F (55°C)
Min. Oil Temp.
55°F (12.8°C)
Utility Hook-Ups (located at rear of pump)
Cooling In
Cooling Out
Cutting Water In
Drain Water Out
Cutting Water Out
Warnings and Shutdowns
Intensifier HP Leak Warning
Intensifier Over Cycle
Inlet Cutting Water Under Pressure
P& 40 psi (2.8 bar) Shutdown
Hydraulic Oil Level Low
Hydraulic Oil Temp.Alert Temp.
T& 131°F (55°C) Warning
Hydraulic Oil Temp.Shutdown Temp.
T&150°F (65°C) Shutdown
Oil Filter Clogged
Motor Fault
HyPrecision 50S - 50hp (37kW)
Frequency (Hz)
Pump Power
Voltage (V)
208-230/460
Current (I)
137-124/63
Main C.B. Rating (I)
Soft Start
True Soft Start
Pump Capabilities
Max. Continuous Output Pressure
60,000 psi (4,137 bar)
Min. Output Pressure
8,000 psi (552 bar)
Max. Output Flow gpm (lpm)
1.1 (4.16)
Max. Orifice (mm)
.014 (0.35)
0.015 (0.38)
Intensifer Configuration
Pressure Control
Panel-Mounted Dual Manual
Bleed Down Valve
External air over oil cooling
Chiller for oil cooling
Redundancy
Redundancy Ready
Electronic Propotional Control
Width, in (mm)
Length, in (mm)
Height, in (mm)
Clearance Height
80in (2.03m)
Operating Weight Approx.
3100lb (1406kg)
Ambient Conditions
Min. Storage Temp. (not drained)
35°F (1.7° C)
Min. Operation Temp.
40°F (4.4° C)
Max. Operating Temp.
95°F (35°C) Note: Higher temperature operation available with additional cooling package
Max. Relative Humidity
Inlet Cutting Water
Min. Inlet Water Pressure
40 psi (1.38 bar)
Max. Inlet Water Pressure
115 psi (7.93 bar)
Max. Inlet Temp.
70°F (21°C)
Min. Inlet Temp.
40°F (4.4° C)
Min. Inlet Flow Rate
2 gpm (7.6 lpm)
Inlet Water Quality
See Water Quality Section
Hydraulic Cooling Water (if not air cooled)
Min. Inlet Water Pressure
40 psi (2.76 bar)
Max. Inlet Water Pressure
(See LP Water section)
115 psi (7.93 bar)
Max. Inlet Temp.
70°F (21°C)
Min. Inlet Temp.
40°F (4.4° C)
Normal Inlet Flow Rate
3 gpm (11.5 lpm)
Hydraulics
Hydraulic Oil Type
ISO AW 32 or ISO AW 46 Mineral Oil
Hydraulic Oil Capacity
37 gal (140 L)
Max. Oil Temp.
130°F (55°C)
Min. Oil Temp.
55°F (12.8°C)
Utility Hook-Ups (located at rear of pump)
Cooling In
1/2 NPT Female
Cooling Out
1/2 NPT Female
Cutting Water In
1/2 NPT Female
Drain Water Out
1/2 NPT Female
Cutting Water Out
3/8 HP Female
Warnings and Shutdowns
Intensifier HP Leak Warning
Intensifier Over Cycle
Inlet Cutting Water Under Pressure
P& 40 psi (2.8 bar) Shutdown
Hydraulic Oil Level Low
Hydraulic Oil Temp.Alert Temp.
T& 131°F (55°C) Warning
Hydraulic Oil Temp.Shutdown Temp.
T&150°F (65°C) Shutdown
Oil Filter Clogged
Motor Fault
HyPrecision 60S - 60hp (44.5kW)
Frequency (Hz)
Pump Power
Voltage (V)
Current (I)
Main C.B. Rating (I)
Soft Start
True Soft Start
Pump Capabilities
Max. Continuous Output Pressure
60,000 psi (4,137 bar)
Min. Output Pressure
8,000 psi (552 bar)
Max. Output Flow gpm (lpm)
Max. Orifice (mm)
.016 (0.46)
Intensifer Configuration
Pressure Control
Panel-Mounted Dual Manual
Bleed Down Valve
External air over oil cooling
Chiller for oil cooling
Redundancy
Redundancy Ready
Electronic Propotional Control
Width, in (mm)
Length, in (mm)
Height, in (mm)
Clearance Height
80in (2.03m)
Operating Weight Approx.
3300lb (1497)
Ambient Conditions
Min. Storage Temp. (not drained)
35°F (1.7° C)
Min. Operation Temp.
40°F (4.4° C)
Max. Operating Temp.
95°F (35°C) Note: Higher temperature operation available with additional cooling package
Max. Relative Humidity
Inlet Cutting Water
Min. Inlet Water Pressure
40 psi (1.38 bar)
Max. Inlet Water Pressure
115 psi (7.72 bar)
Max. Inlet Temp.
70°F (21°C)
Min. Inlet Temp.
40°F (4.4° C)
Min. Inlet Flow Rate
2.5 gpm (9.5 lpm)
Inlet Water Quality
See Water Quality Section
Hydraulic Cooling Water (if not air cooled)
Min. Inlet Water Pressure
40 psi (2.76 bar)
Max. Inlet Water Pressure
(See LP Water section)
115 psi (7.93 bar)
Max. Inlet Temp.
70°F (21°C)
Min. Inlet Temp.
40°F (4.4° C)
Normal Inlet Flow Rate
4 gpm (15 lpm)
Hydraulics
Hydraulic Oil Type
ISO AW 32 or ISO AW 46 Mineral Oil
Hydraulic Oil Capacity
Max. Oil Temp.
130°F (55°C)
Min. Oil Temp.
55°F (12.8°C)
Utility Hook-Ups (located at rear of pump)
Cooling In
1/2 NPT Female
Cooling Out
1/2 NPT Female
Cutting Water In
1/2 NPT Female
Drain Water Out
1/2 NPT Female
Cutting Water Out
3/8 HP Female
Warnings and Shutdowns
Intensifier HP Leak Warning
Intensifier Over Cycle
Inlet Cutting Water Under Pressure
P& 40 psi (2.8 bar) Shutdown
Hydraulic Oil Level Low
Hydraulic Oil Temp.Alert Temp.
T& 131°F (55°C) Warning
Hydraulic Oil Temp.Shutdown Temp.
T&150°F (65°C) Shutdown
Oil Filter Clogged
Motor Fault
HyPrecision 75S - 75hp (56kW)
Frequency (Hz)
Pump Power
Voltage (V)
Current (I)
Main C.B. Rating (I)
Soft Start
True Soft Start
Pump Capabilities
Max. Continuous Output Pressure
60,000 psi (4,137 bar)
Min. Output Pressure
8,000 psi (552 bar)
Max. Output Flow gpm (lpm)
1.5 (5.68)
1.6 (6.06)
Max. Orifice (mm)
.017 (0.43)
0.018 (0.46)
Intensifer Configuration
Pressure Control
Panel-Mounted Dual Manual
Bleed Down Valve
External air over oil cooling
Chiller for oil cooling
Redundancy
Redundancy Ready
Electronic Propotional Control
Width, in (mm)
Length, in (mm)
Height, in (mm)
Clearance Height
80in (2.03m)
Operating Weight Approx.
3300lb (1497kg)
Ambient Conditions
Min. Storage Temp. (not drained)
35°F (1.7° C)
Min. Operation Temp.
40°F (4.4° C)
Max. Operating Temp.
95°F (35°C) Note: Higher temperature operation available with additional cooling package
Max. Relative Humidity
Inlet Cutting Water
Min. Inlet Water Pressure
40 psi (1.38 bar)
Max. Inlet Water Pressure
115 psi (7.72 bar)
Max. Inlet Temp.
70°F (21°C)
Min. Inlet Temp.
40°F (4.4° C)
Min. Inlet Flow Rate
2.5 gpm (9.5 lpm)
Inlet Water Quality
See Water Quality Section
Hydraulic Cooling Water (if not air cooled)
Min. Inlet Water Pressure
40 psi (2.76 bar)
Max. Inlet Water Pressure
(See LP Water section)
115 psi (7.93 bar)
Max. Inlet Temp.
70°F (21°C)
Min. Inlet Temp.
40°F (4.4° C)
Normal Inlet Flow Rate
4 gpm (15 lpm)
Hydraulics
Hydraulic Oil Type
ISO AW 32 or ISO AW 46 Mineral Oil
Hydraulic Oil Capacity
Max. Oil Temp.
130°F (55°C)
Min. Oil Temp.
55°F (12.8°C)
Utility Hook-Ups (located at rear of pump)
Cooling In
1 NPT Female
Cooling Out
1 NPT Female
Cutting Water In
3/4 NPT Female
Drain Water Out
3/4 NPT Female
Cutting Water Out
3/8 HP Female
Warnings and Shutdowns
Intensifier HP Leak Warning
Intensifier Over Cycle
Inlet Cutting Water Under Pressure
P& 40 psi (2.8 bar) Shutdown
Hydraulic Oil Level Low
Hydraulic Oil Temp.Alert Temp.
T& 131°F (55°C) Warning
Hydraulic Oil Temp.Shutdown Temp.
T&150°F (65°C) Shutdown
Oil Filter Clogged
Motor Fault
HyPrecision 100D - 100hp (75kW)
Frequency (Hz)
Pump Power
Voltage (V)
Current (I)
Main C.B. Rating (I)
Soft Start
True Soft Start
Pump Capabilities
Max. Continuous Output Pressure
60,000 psi (4,137 bar)
Min. Output Pressure
8,000 psi (552 bar)
Max. Output Flow gpm (lpm)
2.1 (7.95)
2.2 (8.33)
Max. Orifice (mm)
0.02 (0.51)
0.021 (0.53)
Intensifer Configuration
Pressure Control
Electronic Proportional Control
Bleed Down Valve
Air over oil cooling
Chiller for oil cooling
Water isolation valves
Width, in (mm)
Length, in (mm)
Height, in (mm)
Clearance Height
80in (2.03m)
Operating Weight Approx.
4150lb (1882kg)
Ambient Conditions
Min. Storage Temp. (not drained)
35°F (1.7° C)
Min. Operation Temp.
40°F (4.4° C)
Max. Operating Temp.
95°F (35°C) Note: Higher temperature operation available with additional cooling package
Max. Relative Humidity
Inlet Cutting Water
Min. Inlet Water Pressure
40 psi (1.38 bar)
Max. Inlet Water Pressure
115 psi (7.72 bar)
Max. Inlet Temp.
70°F (21°C)
Min. Inlet Temp.
40°F (4.4° C)
Min. Inlet Flow Rate
5 gpm (19 lpm)
Inlet Water Quality
See Water Quality Section
Hydraulic Cooling Water (if not air cooled)
Min. Inlet Water Pressure
40 psi (2.76 bar)
Max. Inlet Water Pressure
(See LP Water section)
115 psi (7.93 bar)
Max. Inlet Temp.
70°F (21°C)
Min. Inlet Temp.
40°F (4.4° C)
Normal Inlet Flow Rate
8 gpm (30 lpm)
Hydraulics
Hydraulic Oil Type
ISO AW 32 or ISO AW 46 Mineral Oil
Hydraulic Oil Capacity
90 gal (340 L)
Max. Oil Temp.
130°F (55°C)
Min. Oil Temp.
55°F (12.8°C)
Utility Hook-Ups (located at rear of pump)
Cooling In
1 NPT Female
Cooling Out
1 NPT Female
Cutting Water In
3/4 NPT Female
Drain Water Out
3/4 NPT Female
Cutting Water Out
9/16 HP Female
Warnings and Shutdowns
Intensifier HP Leak Warning
Intensifier Over Cycle
Inlet Cutting Water Under Pressure
P& 40 psi (2.8 bar) Shutdown
Hydraulic Oil Level Low
Hydraulic Oil Temp.Alert Temp.
T& 131°F (55°C) Warning
Hydraulic Oil Temp.Shutdown Temp.
T&150°F (65°C) Shutdown
Oil Filter Clogged
Motor Fault
HyPrecision 150D - 150hp (112kW)
Frequency (Hz)
Pump Power
Voltage (V)
Current (I)
Main C.B. Rating (I)
Soft Start
True Soft Start
Pump Capabilities
Max. Continuous Output Pressure
60,000 psi (4,137 bar)
Min. Output Pressure
8,000 psi (552 bar)
Max. Output Flow gpm (lpm)
3.0 (11.4)
3.2 (12.1)
Max. Orifice (mm)
0.024 (0.61)
0.025 (0.64)
Intensifer Configuration
Pressure Control
Electronic Proportional Control
Bleed Down Valve
Air over oil cooling
Chiller for oil cooling
Water isolation valves
Width, in (mm)
Length, in (mm)
Height, in (mm)
Clearance Height
80in (2.03m)
Operating Weight Approx.
6100lb (2767kg)
Ambient Conditions
Min. Storage Temp. (not drained)
35°F (1.7° C)
Min. Operation Temp.
40°F (4.4° C)
Max. Operating Temp.
95°F (35°C) Note: Higher temperature operation available with additional cooling package
Max. Relative Humidity
Inlet Cutting Water
Min. Inlet Water Pressure
40 psi (1.38 bar)
Max. Inlet Water Pressure
115 psi (7.72 bar)
Max. Inlet Temp.
70°F (21°C)
Min. Inlet Temp.
40°F (4.4° C)
Min. Inlet Flow Rate
Inlet Water Quality
See Water Quality Section
Hydraulic Cooling Water (if not air cooled)
Min. Inlet Water Pressure
40 psi (2.76 bar)
Max. Inlet Water Pressure
(See LP Water section)
115 psi (7.93 bar)
Max. Inlet Temp.
70°F (21°C)
Min. Inlet Temp.
40°F (4.4° C)
Normal Inlet Flow Rate
10 gpm (38 lpm)
Hydraulics
Hydraulic Oil Type
ISO AW 32 or ISO AW 46 Mineral Oil
Hydraulic Oil Capacity
96 gal (363 L)
Max. Oil Temp.
130°F (55°C)
Min. Oil Temp.
55°F (12.8°C)
Utility Hook-Ups (located at rear of pump)
Cooling In
1 NPT Female
Cooling Out
1 NPT Female
Cutting Water In
3/4 NPT Female
Drain Water Out
3/4 NPT Female
Cutting Water Out
9/16 HP Female
Warnings and Shutdowns
Intensifier HP Leak Warning
Intensifier Over Cycle
Inlet Cutting Water Under Pressure
P& 40 psi (2.8 bar) Shutdown
Hydraulic Oil Level Low
Hydraulic Oil Temp.Alert Temp.
T& 131°F (55°C) Warning
Hydraulic Oil Temp.Shutdown Temp.
T&150°F (65°C) Shutdown
Oil Filter Clogged
Motor Fault
ORIFICE COMBINATIONS
Frequency(Hz)
HyPrecision 3030hp(22kW)
HyPrecision 5050hp(37kW)
HyPrecision 50S50hp(37kW)
HyPrecision 75S75hp(56kW)
HyPrecision 100D100hp(75kW)
HyPrecision 150D150hp(112kW)
1 Orifices
2 Orifices
3 Orifices
4 Orifices
5 Orifices
6 Orifices
WATER TREATMENT GUIDELINES
High Quality Water
No treatment required
Good Quality Water
50 ppm &TDS & 150 ppm
Soften Only
Medium Quality Water
150 ppm & TDS & 250 ppm
Soften or TDS removal
Poor Quality Water
TDS & 250 ppm
Silica & 15 ppm
TDS removal
TORQUE SPECIFICATIONS
Specific Torques
Intensifier Stud: 1 in. nut
275 ft-lb (373 N-m)
Intensifier Center: 7/8 in. cap screw
275 ft-lb (373 N-m)
General Torques:
The torques below are to be applied only to those fasteners not listed above:
45 in-lb (5.1 N-m)
105 in-lb (11.9 N-m)
18 ft-lb (24 N-m)
33 ft-lb (45 N-m)
53 ft-lb (72 N-m)
80 ft-lb. (108 N-m)
High Pressure Fitting Torques
15-25 ft-lb (20-34 N-m)
35-45 ft-lb (47-60N-m)
60-75 ft-lb (80-100N-m)
Boost Pump Option
If your inlet water pressure is low and may not be able to maintain the required pressure and/or flow rate,
a boost pump for the inlet cutting water can be purchased. See the specifications for your pump for pressure and flow rate requirements.
Typical requirements
(your actual requirements should be verified)
Flow Rate (gpm)*
40 – 115 PSI
40 – 115 PSI
40 – 115 PSI
40 – 115 PSI
40 – 115 PSI
40 – 115 PSI
Subscribe!
Subscribe to our newsletter for updates.
Email Address: