InSAR（2）
Two way to intall roi_pac
0. install basic environment
apt-get update && apt-get dist-upgrade
apt-get install build-essential gcc g++ gfortran make perl subversion libhdf4-dev python-dev libgdal-dev gdal-bin libc6 libgcc libstdc++6 libxml2-dev libxslt1-dev idle python-lxml gawk
check every folder
better to install Doris
1. follows
(1) install fftw
cd fftw-3.3
./configure --enable-float
make install
It installed to the default location /usr/local/lib& and /usr/local/include
you can add export below to .bashrc, the path should be set to the folder where libfftw2f.a is for LIB_DIR and fftw3.h for INC_DIR
export FFTW_LIB_DIR=/usr/local/lib
export FFTW_INC_DIR=/usr/local/include
(2) install roi_pac
cd ROI_PAC_3_0_1
cd ROI_PAC
./configure
make install
cp DOC/SAR_CONFIG ./&&&& copy SAR_CONFIG in DOC to ROI_PAC
gedit SAR_CONFIG
then edit SAR_CONFIG, added INT_BIN, INT_SCR, PATH to it.
It is my SAR_CONFIG showing below.
export ROI_PAC=&/usr/local&
export INT_BIN=&$ROI_PAC/bin&
export INT_SCR=&$ROI_PAC/share/roi_pac&
export MAI_SCR=&/usr/local/soft/ROI_PAC_3_0_1/ROI_PAC/MAI_SCR&
export ROI_MAI=&/usr/local/soft/ROI_PAC_3_0_1/ROI_PAC/roi_mai&
export FFTW_LIB=&/usr/local/lib&
export MY_BIN=&/usr/local/soft/ALOS_preproc/bin/x86_64&
export PATH=$PATH:$INT_BIN:$INT_SCR:$FFTW_LIB:$MY_BIN:$MAI_SCR:$ROI_MAI
source /usr/local/soft/ROI_PAC_3_0_1/ROI_PAC/SAR_CONFIG
to the end of .bashrc
(3) download make_raw_alos.pl and ALOS_preproc.tar.gz from page
transform dos format make_raw_alos.pl to unix format using
dos2unix ***(filename)
make it exacutable
chmod a+x make_raw_alos.pl
the copy the .pl to /usr/local/share/roi_pac or where your INT_SCR is.
then go into ALOS_preproc folder
cd ALOS_preproc
finally add MY_BIN and PATH to your SAR_CONFIG
export MY_BIN=&/usr/local/soft/ALOS_preproc/bin/x86_64&
&pre name=&code& class=&plain&&export PATH=$PATH:$INT_BIN:$INT_SCR:$FFTW_LIB:$MY_BIN:$MAI_SCR:$ROI_MAI
(4)& modified add_rmgAmpPhs.c in /ROI_PAC_3_0_1/ROI_PAC/fip
cd /ROI_PAC/fip
gedit add_rmpAmpPhs.c
add #include &stdlib.h& to the third line
gcc -o add_rmgAmpPhs add_rmgAmpPhs.c
chmod a+x add_rmgAmpPhs
sudo mv add_rmgAmpPhs /usr/local/bin
(5) install roiview
search roiview in sourceforge.net and download
the bugs are already fixed and can be found in README.txt
##################
#     BUGS       #
##################
1. A known issue is the high memory usage. That's part of the matplotlib module problems.
for a low memory machines it is recommended to use -o option without -s
(this will produce the image with now viewing option) or reduce the file size.
2. ERROR: &Sorry, Can't creat image. Colorbar instance has no attribute '__getitem__'.
Changes in matplotlib colorbar function cause this error. Fix:
With the source package, go to the code where roiview.py is and run:
sed -i &s/colorbar\[0\]/colorbar/g& *.py
sed -i &s/colorbar\[1\]/colorbar\.ax/g& *.py
3. When using ROI_PAC output files: &Sorry, Can't create image&
This is a known problem of the roi-pac headers.
The number of lines should be adjusted to the correct number of lines in the file.
You can check it by using the following formula:
[file_size_in_bytes] = width X length X 8
Usually, the length should be decreased by 1.
(6) install MAI package
Noa Bechor and Howard Zebker package:&
copy&acpatch.F in roi_deskew_distribute to
ROI_PAC/roi
make clean
cp roi $INT_BIN/.
in /INT_SCR_deskew_distribute folder
dos2unix *.pl
chmod a+x *.pl
cp *.pl $INT_SCR/.
in /ROI_PAC folder
mkdir roi_mai
cp -rf roi/* roi_mai/.
go into roi/ and press Ctrl+H to show the folder .deps/, then copy the folder to roi_mai/
cd roi_mai
Edit the Makefile to change the end of the relevant paths (saysrcdir and VPATH) from /roi to /roi_mai
&abs_builddir =&
&abs_srcdir =&
&subdir = roi&& not sure
copy the files in roi_mai_distribute/ into roi_mai
cp roi ./roi_mai
in /ROI_PAC folder
mkdir MAI_SCR
copy the files in MAI_SCR_distribute/ into it
change the name a.out, get_time_new and translate_new to
diffigram, get_time and translate
add path in SAR_CONFIG
export MAI_SCR=&/usr/local/soft/ROI_PAC_3_0_1/ROI_PAC/MAI_SCR&
export ROI_MAI=&/usr/local/soft/ROI_PAC_3_0_1/ROI_PAC/roi_mai&
&pre name=&code& class=&plain&&export PATH=$PATH:$INT_BIN:$INT_SCR:$FFTW_LIB:$MY_BIN:$MAI_SCR:$ROI_MAI
you may encounter an error when using it
shared libraries: libg2c.so.0
you can find solution in
the file *.f can be compiled by
gfortran -ffree-form diffigram.f
the output is a.out
=======================================
to be continue...........
=======================================
Maybe it's better to install the roi_pac to local folder ROI_PAC
2. Second approach to install is to do as the official guide. It install to the local
reference:
I follow the guide to do test.
NOTICE: modify the multitest.sh in /ROR_PAC/contrib
from &SAR_ODR_DIR=&$testrun_dir&/ERS/Delft& to &SAR_ODR_DIR=&$testrun_dir&/ERS1/Delft&
or you may not find the orbit data when you run multitest.sh
# go to download directory
admins-MacBook-Pro-7:~ insar$ cd Downloads/
# unpack ROI_pac source code
admins-MacBook-Pro-7:Downloads insar$ tar xvf roi_pac_3_1beta.tgz
x ROI_PAC_3_1beta/
x ROI_PAC_3_1beta/.DS_Store
x ROI_PAC_3_1beta/AAREADME
x ROI_PAC_3_1beta/Delft/
x ROI_PAC_3_1beta/DGX_MDX/
x ROI_PAC_3_1beta/FFTW/
x ROI_PAC_3_1beta/ROI_PAC/
x ROI_PAC_3_1beta/ROI_PAC/AAREADME_BUILD_ROIPAC
# go to ROI_pac directory
admins-MacBook-Pro-7:Downloads insar$ cd ROI_PAC_3_1beta/
admins-MacBook-Pro-7:ROI_PAC_3_1beta insar$ ls
AAREADME DGX_MDX
admins-MacBook-Pro-7:ROI_PAC_3_1beta insar$ cd ROI_PAC/
admins-MacBook-Pro-7:ROI_PAC insar$ ls
AAREADME_BUILD_ROIPAC README
aclocal.m4
jers_codes
autom4te.cache
config.h.in
mkinstalldirs
Makefile.am
mon configure.ac
resamp_roi
Makefile.in
sch_to_dem
simulation
PROC_FILES
install-sh
# build FFTW libraries
admins-MacBook-Pro-7:ROI_PAC insar$ ./contrib/install-fftw.sh
curl -O ftp://ftp.fftw.org/pub/fftw/fftw-3.2.2.tar.gz
% Received % Xferd
Average Speed
0:00:09 --:--:--
tar xzf /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/NetDist/fftw-3.2.2.tar.gz
configure --enable-float --prefix=/Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/NetInst/fftw-6
make install
(This may take a few minutes.)
Looks like build was successful.
To setup your environment for multibuild.sh
export FFTW_LIB_DIR=/Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/NetInst/fftw-6/lib
export FFTW_INC_DIR=/Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/NetInst/fftw-6/include
setenv FFTW_LIB_DIR /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/NetInst/fftw-6/lib
setenv FFTW_INC_DIR /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/NetInst/fftw-6/include
# set environment variables for locations of built FFTW libraries and include files
# should also add to &SAR_CONFIG& file
admins-MacBook-Pro-7:ROI_PAC insar$ export FFTW_LIB_DIR=/Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/NetInst/fftw-6/lib
admins-MacBook-Pro-7:ROI_PAC insar$ export FFTW_INC_DIR=/Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/NetInst/fftw-6/include
# build ROI_pac executables
admins-MacBook-Pro-7:ROI_PAC insar$ ./contrib/multibuild.sh
Will configure using /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/configure
Doing builds in multibuild-3
common_options are &LDFLAGS=-L/Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/NetInst/fftw-6/lib#CPPFLAGS=-I/Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/NetInst/fftw-6/include&
installation directory is /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-3/installs
DON'T PANIC!
Failed builds are expected for compilers you do not have installed.
Starting &defaults& build with options &-verbose&
Build &defaults& succeeded.
Starting &ifort& build with options &FC=ifort#FCFLAGS=-O2&
Build &ifort& failed.
See multibuild-3/ifort-build-log
Starting &g95& build with options &FC=g95#FCFLAGS=-O2 -i4&
Build &g95& failed.
See multibuild-3/g95-build-log
Starting &pgf95& build with options &FC=pgf95#FCFLAGS=-O2&
Build &pgf95& failed.
See multibuild-3/pgf95-build-log
Starting &gfortran& build with options &FC=gfortran#FCFLAGS=-O2&
Build &gfortran& succeeded.
Starting &f90& build with options &FC=f90#FCFLAGS=-O2&
Build &f90& failed.
See multibuild-3/f90-build-log
Starting &f90nc& build with options &FC=f90#FCFLAGS=-O2 -ftrap=%none&
Build &f90nc& failed.
See multibuild-3/f90nc-build-log
Starting &f90cc& build with options &FC=f90#FCFLAGS=-O2#CC=cc&
Build &f90cc& failed.
See multibuild-3/f90cc-build-log
Starting &xlf& build with options &FC=xlf#FCFLAGS=-O2&
Build &xlf& failed.
See multibuild-3/xlf-build-log
Starting &ifort-g& build with options &FC=ifort#FCFLAGS=-g&
Build &ifort-g& failed.
See multibuild-3/ifort-g-build-log
Starting &g95-g& build with options &FC=g95#FCFLAGS=-g -i4&
Build &g95-g& failed.
See multibuild-3/g95-g-build-log
Starting &pgf95-g& build with options &FC=pgf95#FCFLAGS=-g&
Build &pgf95-g& failed.
See multibuild-3/pgf95-g-build-log
Starting &gfortran-g& build with options &FC=gfortran#FCFLAGS=-g&
Build &gfortran-g& succeeded.
Starting &f90-g& build with options &FC=f90#FCFLAGS=-g&
Build &f90-g& failed.
See multibuild-3/f90-g-build-log
Starting &xlf-g& build with options &FC=xlf#FCFLAGS=-g&
Build &xlf-g& failed.
See multibuild-3/xlf-g-build-log
Starting &f90cc-g& build with options &FC=f90#FCFLAGS=-g#CC=cc#CFLAGS=-g&
Build &f90cc-g& failed.
See multibuild-3/f90cc-g-build-log
Starting &CCFFT& build with options &FCFLAGS=-DHAVE_CCFFT#LIBS=-lscs#--without-fftw&
Build &CCFFT& failed.
See multibuild-3/CCFFT-build-log
Starting &CFFT1D& build with options &FCFLAGS=-O2 -DHAVE_CFFT1D#LIBS=-lcomplib.sgimath#--without-fftw#CC=cc#CFLAGS=-O2&
Build &CFFT1D& failed.
See multibuild-3/CFFT1D-build-log
Starting &CFFTF& build with options &FCFLAGS=-fast -xvector=no -DHAVE_CFFTF#LIBS=-lsunperf#--without-fftw#CC=cc#CFLAGS=-fast&
Build &CFFTF& failed.
See multibuild-3/CFFTF-build-log
Starting &C1DFFT& build with options &FCFLAGS=-DHAVE_C1DFFT#LIBS=-lveclib#--without-fftw&
Build &C1DFFT& failed.
See multibuild-3/C1DFFT-build-log
Starting &gfortran64& build with options &FC=gfortran#FCFLAGS=-O2 -m64#CC=cc#CFLAGS=-O2 -m64&
Build &gfortran64& succeeded.
Starting &gfortran64-g& build with options &FC=gfortran#FCFLAGS=-g -m64#CC=cc#CFLAGS=-g -m64&
Build &gfortran64-g& succeeded.
Starting &f90cc64& build with options &FC=f90#FCFLAGS=-O2 -64#CC=cc#CFLAGS=-O2 -64&
Build &f90cc64& failed.
See multibuild-3/f90cc64-build-log
Starting &f90cc64-g& build with options &FC=f90#FCFLAGS=-g -64#CC=cc#CFLAGS=-g -64&
Build &f90cc64-g& failed.
See multibuild-3/f90cc64-g-build-log
Be patient waiting for some builds to succeed.
Fully completed build binaries are in:
/Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-3/installs/defaults/bin
/Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-3/installs/gfortran-g/bin
/Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-3/installs/gfortran/bin
/Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-3/installs/gfortran64-g/bin
/Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-3/installs/gfortran64/bin
Perl scripts (which are common to all sets of binaries) are in:
/Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-3/installs/share/roi_pac
See README_ROI_BUILD for information on how to run
contrib/multitest.sh
to do test runs using data from TEST_DIR.tar
# set environment variables for ROI_pac binaries and scripts
# also add to SAR_CONFIG!!!
admins-MacBook-Pro-7:ROI_PAC insar$ export INT_BIN=/Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-3/installs/gfortran/bin
admins-MacBook-Pro-7:ROI_PAC insar$ export INT_SCR=/Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-3/installs/share/roi_pac
# go back to download directory
admins-MacBook-Pro-7:ROI_PAC insar$ pwd
/Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC
admins-MacBook-Pro-7:ROI_PAC insar$ cd ../..
admins-MacBook-Pro-7:Downloads insar$ ls
About Downloads.pdf
fftw-3.2.2.tar.gz
ENV1_2_084_.baq
gcc-snwleo-intel-bin.tar.gz
ENV1_2_084_.baq
gfortran-snwleo-intel-bin.tar.gz
h5py-1.3.1
InSARPrinciplesTheory_UNAVCO_11.pdf h5py-1.3.1.tar.gz
installation-steps (Autosaved).txt
MacPorts-2.0.0-10.6-SnowLeopard.dmg installation-steps.txt
ROI_PAC_3_0_1
netcdf-4.1.3
ROI_PAC_3_0_1.tgz
netcdf-4.1.3.tar.gz
ROI_PAC_3_1beta
numpy-1.6.1
SAR_CONFIG-gfortran.txt
numpy-1.6.1.tar.gz
SAR_CONFIG-gfortran_v3_1.txt
roi_pac_3_1beta.tgz
roi_pac_testdir.tar.gz
fftw-3.2.2
rp_test_download.html
################ ready for testing ############
# source the SAR_CONFIG
admins-MacBook-Pro-7:Downloads insar$ source SAR_CONFIG-gfortran_v3_1.txt
# unpack test data
admins-MacBook-Pro-7:Downloads insar$ tar zxvf roi_pac_testdir.tar.gz
x ./TEST_DIR/
x ./TEST_DIR/930110/
x ./TEST_DIR/930110/IMAGERY
x ./TEST_DIR/930110/SARLEADER
x ./TEST_DIR/930110/VDF2739T1
x ./TEST_DIR/950523/
x ./TEST_DIR/950523/IMAGERY
x ./TEST_DIR/950523/SARLEADER
x ./TEST_DIR/950523/VDF3409T1
x ./TEST_DIR/AAREADME
x ./TEST_DIR/DEM/
x ./TEST_DIR/DEM/SoCal.dem
x ./TEST_DIR/DEM/SoCal.dem.rsc
x ./TEST_DIR/DEM/SoCal.dem.org
x ./TEST_DIR/DEM/SoCal.dem.hdr
x ./TEST_DIR/DEM/SoCal.dem.pc_byte_order
x ./TEST_DIR/DEM/SoCal.dem.pc_byte_order.hdr
x ./TEST_DIR/DEM/SoCal.dem.nonpc_byte_order
x ./TEST_DIR/Makefile
x ./TEST_DIR/PRC/
x ./TEST_DIR/PRC/ERS1/
x ./TEST_DIR/PRC/ERS1/PRC_76_rev2.Z
x ./TEST_DIR/PRC/ERS1/PRC_15_rev2.Z
x ./TEST_DIR/PRC/ERS1/arclist
x ./TEST_DIR/int.proc
x ./TEST_DIR/roi.proc
# go into test directory
admins-MacBook-Pro-7:Downloads insar$ cd TEST_DIR/
admins-MacBook-Pro-7:TEST_DIR insar$ ls
AAREADME Makefile int.proc
# go to 1993 image directory
admins-MacBook-Pro-7:TEST_DIR insar$ cd 930110/
admins-MacBook-Pro-7:930110 insar$ ls
IMAGERY SARLEADER VDF2739T1
##### make raw data from ERS data product
# get usage
admins-MacBook-Pro-7:930110 insar$ make_raw.pl
Usage: make_raw.pl orbit_type leader_file date [facility] [reference_counter]
facility: processing facility
reference_counter: default is read from imagery file
Function: Creates I&date&.raw and I&date&.raw.rsc from imagery files
*** Last Update Oct 06, 1999
*** For more info see http://roipac.org
*** This software is part of the ROI_PAC suite.
*** Licensed software, not for general distribution.
# run make_raw
admins-MacBook-Pro-7:930110 insar$ make_raw.pl PRC SARLEADER 930110
+make_raw.pl Checking I/O
Creating 930110.raw
Creating 930110.raw.rsc
+make_raw.pl General definitions
+make_raw.pl Getting facility name
+make_raw.pl Finding reference counter, pri and prf
counter read: 900
swst offset read: 204
+make_raw.pl Reference counter = 900
+make_raw.pl Checking line number
+make_raw.pl /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-3/installs/gfortran/bin/new_parse
1 IMAGERY tmp_IMAGERY.raw
+make_raw.pl Reading the leader file
+make_raw.pl /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-3/installs/gfortran/bin/leader2rsc SARLEADER /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-3/installs/share/roi_pac/format_leaderfile_CRDC-SARDPF tmp_IMAGERY.raw.rsc
+make_raw.pl Reading the imagery file
+make_raw.pl Setting the starting range
+make_raw.pl /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-3/installs/gfortran/bin/delay_shift tmp_IMAGERY.raw tmp_IMAGERY.new shift.out 204 900 636 0 0
shifting line 0
shifting line 10000
+make_raw.pl Writing the imagery resource file
+make_raw.pl Reading state vectors in SARLEADER's header, Building hdr_data_points_930110 file
+make_raw.pl Using Orbit Information
+make_raw.pl Doppler Computation
+make_raw.pl Raw data ready for processing
admins-MacBook-Pro-7:930110 insar$ ls
930110.raw
930110.raw.rsc
930110_parse_line.out
shift.out.rsc
IMAGERY dop.unw
shift.out.rsc.hst
hdr_data_points_930110.rsc tmp_IMAGERY.raw.rsc.hst
SARLEADER log
tmp_poly.rsc.hst
# go to 1995 image directory
admins-MacBook-Pro-7:930110 insar$ cd ../950523/
# run make_raw on 1995 scene
admins-MacBook-Pro-7:950523 insar$ make_raw.pl PRC SARLEADER 950523
+make_raw.pl Checking I/O
Creating 950523.raw
+make_raw.pl General definitions
+make_raw.pl Getting facility name
+make_raw.pl Finding reference counter, pri and prf
counter read: 900
swst offset read: 204
+make_raw.pl Reference counter = 900
+make_raw.pl Checking line number
+make_raw.pl /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-3/installs/gfortran/bin/new_parse
1 IMAGERY tmp_IMAGERY.raw
+make_raw.pl Reading the leader file
+make_raw.pl /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-3/installs/gfortran/bin/leader2rsc SARLEADER /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-3/installs/share/roi_pac/format_leaderfile_CRDC-SARDPF tmp_IMAGERY.raw.rsc
+make_raw.pl Reading the imagery file
+make_raw.pl Setting the starting range
+make_raw.pl /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-3/installs/gfortran/bin/delay_shift tmp_IMAGERY.raw tmp_IMAGERY.new shift.out 204 900 636 0 0
shifting line 0
shifting line 10000
+make_raw.pl Writing the imagery resource file
+make_raw.pl Reading state vectors in SARLEADER's header, Building hdr_data_points_950523 file
+make_raw.pl Using Orbit Information
+make_raw.pl Doppler Computation
+make_raw.pl Raw data ready for processing
admins-MacBook-Pro-7:950523 insar$ ls
950523.raw
950523.raw.rsc
950523_parse_line.out
shift.out.rsc
IMAGERY dop.unw
shift.out.rsc.hst
hdr_data_points_950523.rsc tmp_IMAGERY.raw.rsc.hst
SARLEADER log
tmp_poly.rsc.hst
# go back to main directory
admins-MacBook-Pro-7:950523 insar$ cd ..
admins-MacBook-Pro-7:TEST_DIR insar$ ls
AAREADME Makefile int.proc
### edit the int.proc file to have path to this DEM directory!
# like this:
# DEM=/Users/insar/Downloads/TEST_DIR/DEM/SoCal.dem
### run processing with process_2pass.pl script
admins-MacBook-Pro-7:TEST_DIR insar$ process_2pass.pl int.proc
+process_2pass.pl Read the inputfile
+process_2pass.pl Define Variables
+process_2pass.pl Go from raw to slc to int and cor (also flattens with orbits)
+raw2ampintcor.pl Check Doppler values
+dopav.pl Checking I/O
Creating /Users/insar/Downloads/TEST_DIR/930110/roi.dop.rsc
Creating /Users/insar/Downloads/TEST_DIR/950523/roi.dop.rsc
+dopav.pl Reading the imagery files.raw.rsc
+dopav.pl Creating the files roi.dop.rsc
+dopav.pl just before SL_AZIMUT_RESOL
+dopav.pl just after SL_AZIMUT_RESOL
+dopav.pl just before SL_AZIMUT_RESOL
+dopav.pl just after SL_AZIMUT_RESOL
+raw2ampintcor.pl Make ROI Input Files
+roi_prep.pl Read the inputfile
+roi_prep.pl Checking I/O
Creating 930110_roi.in
Creating 930110.slc.rsc
+roi_prep.pl setting roi default
+roi_prep.pl Reading resource file: 930110.raw.rsc
Keyword RANGE_OFFSET doesn't exist in 930110.raw.rsc, returning 0
+roi_prep.pl Computing parameters
+roi_prep.pl chirp length in samples 704
+roi_prep.pl Azimuth patch length 4096
+roi_prep.pl Synthetic aperture length in samples 1101
+roi_prep.pl Writing resource file: 930110.slc.rsc
+roi_prep.pl Writing roi input file: 930110_roi.in
+roi_prep.pl Read the inputfile
+roi_prep.pl Checking I/O
Creating 950523_roi.in
Creating 950523.slc.rsc
+roi_prep.pl setting roi default
+roi_prep.pl Reading resource file: 950523.raw.rsc
Keyword RANGE_OFFSET doesn't exist in 950523.raw.rsc, returning 0
+roi_prep.pl Computing parameters
+roi_prep.pl chirp length in samples 704
+roi_prep.pl Azimuth patch length 4096
+roi_prep.pl Synthetic aperture length in samples 1101
+roi_prep.pl Writing resource file: 950523.slc.rsc
+roi_prep.pl Writing roi input file: 950523_roi.in
+raw2ampintcor.pl Make Baseline files
+baseline.pl Checking I/O
Creating 523_baseline.rsc
+baseline.pl Reading resource file: 930110.slc.rsc
+baseline.pl Reading resource file: 950523.slc.rsc
lookangle 16.
+baseline.pl Getting orbital parameters
+baseline.pl Calculating baseline
+baseline.pl Printing to file 523_baseline.rsc
+raw2ampintcor.pl Running ROI
Starting ROI 1
+roi.pl Checking I/O
Creating 930110.slc
+roi.pl /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-3/installs/gfortran/bin/roi 930110_roi.in & 930110_roi.out
+roi.pl /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-3/installs/share/roi_pac/length.pl 930110.slc
+look.pl Checking I/O
Creating rlks.slc
Creating rlks.slc.rsc
+look.pl Wrote new rscfile
+look.pl Using lookdown routine
Starting ROI 2
+roi.pl Checking I/O
Creating 950523.slc
+roi.pl /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-3/installs/gfortran/bin/roi 950523_roi.in & 950523_roi.out
+roi.pl /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-3/installs/share/roi_pac/length.pl 950523.slc
+look.pl Checking I/O
Creating rlks.slc
Creating rlks.slc.rsc
+look.pl Wrote new rscfile
+look.pl Using lookdown routine
+raw2ampintcor.pl Get offsets
+make_offset.pl Checking I/O
Creating 523_ampcor.off
Creating 523_ampcor.off.rsc
+make_offset.pl Reading resource file: 523_baseline.rsc
+offset.pl Checking I/O
Creating 523_ampcor_gross.off
Creating 523_ampcor_gross.in
Creating 523_ampcor_gross.out
+offset.pl Reading resource file: 930110.slc.rsc
+offset.pl Reading resource file: 950523.slc.rsc
+offset.pl Writing resource file: 523_ampcor_gross.off.rsc
+offset.pl Writing input_file: 523_ampcor_gross.in
+offset.pl /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-3/installs/gfortran/bin/ampcor 523_ampcor_gross.in rds & 523_ampcor_gross.out
+make_offset.pl /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-3/installs/gfortran/bin/fitoff 523_ampcor_gross.off 523_cull_gross.off 1.5 0.5 10 & fitoff_ampcor_gross.out
+make_offset.pl 311 points left after culling
+make_offset.pl extracting affine transformation parameters from gross match
+make_offset.pl Fine Matching and Culling
+offset.pl Checking I/O
Creating 523_ampcor.in
Creating 523_ampcor.out
+offset.pl Reading resource file: 930110.slc.rsc
+offset.pl Reading resource file: 950523.slc.rsc
+offset.pl Writing resource file: 523_ampcor.off.rsc
+offset.pl Writing input_file: 523_ampcor.in
+offset.pl /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-3/installs/gfortran/bin/ampcor 523_ampcor.in rds & 523_ampcor.out
+make_offset.pl /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-3/installs/gfortran/bin/fitoff 523_ampcor.off 523_cull.off 1.5 0.08 50 & fitoff_ampcor.out
+raw2ampintcor.pl Do the interferogram
+resamp.pl Checking I/O
Creating 523.int
Creating 523.int.rsc
Creating 523.amp
Creating 523.amp.rsc
+resamp.pl Reading resource files: 930110.slc.rsc and 950523.slc.rsc
+resamp.pl Computing new lengths
+resamp.pl Writing resource file: 523.int.rsc
+resamp.pl Writing resource file: 523.amp.rsc
+resamp.pl Writing resamp input file: 523_resamp.in
+raw2ampintcor.pl Flattening with orbits
+add_rmg.pl Checking I/O
Creating reference.hgt
Creating reference.hgt.rsc
+add_rmg.pl Adding back
+add_rmg.pl /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-3/installs/gfortran/bin/add_rmg junk.unw \
junk.unw \
reference.hgt \
+diffnsim.pl Checking I/O
Creating flat_PRC_523.int
Creating flat_PRC_523.int.rsc
Creating ramp_PRC.unw
Creating ramp_PRC.unw.rsc
+diffnsim.pl Reading resource file: 523.int.rsc
+diffnsim.pl Reading resource file: reference.hgt.rsc
Keyword HEADING_DEG doesn't exist in reference.hgt.rsc, returning 0
Keyword RGE_REF1 doesn't exist in reference.hgt.rsc, returning 0
+diffnsim.pl Writing resource file: flat_PRC_523.int.rsc
+diffnsim.pl Running diffnsim
+diffnsim.pl no masking applied
+look.pl Checking I/O
Creating flat_PRC_523_4rlks.int
Creating flat_PRC_523_4rlks.int.rsc
+look.pl Wrote new rscfile
+look.pl Using lookdown routine
+look.pl Checking I/O
Creating ramp_PRC_4rlks.unw
Creating ramp_PRC_4rlks.unw.rsc
+look.pl Wrote new rscfile
+look.pl Using lookdown routine
+look.pl Checking I/O
Creating reference_4rlks.hgt
Creating reference_4rlks.hgt.rsc
+look.pl Wrote new rscfile
Keyword AZIMUTH_PIXEL_GROUND doesn't exist in reference.hgt.rsc, returning 0
+look.pl Using lookdown routine
+raw2ampintcor.pl Calculate Correlation File
+make_cor.pl Checking I/O
Creating 523.cor
Creating 523.cor.rsc
+make_cor.pl Reading resource file: flat_PRC_523.int.rsc
+make_cor.pl Writing resource file: 523.cor.rsc
+make_cor.pl /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-3/installs/gfortran/bin/cchz_wave flat_PRC_523.int 523.amp 523.cor 5700 5
#lines in the interferogram file: 2593
processing line: 2590+look.pl Checking I/O
Creating 523_4rlks.cor
Creating 523_4rlks.cor.rsc
+look.pl Wrote new rscfile
+look.pl Using lookdown routine
+look.pl Checking I/O
Creating 523_16rlks.cor
Creating 523_16rlks.cor.rsc
+look.pl Wrote new rscfile
+look.pl Using lookdown routine
+replace_mag.pl cpx2mag_phs flat_PRC_523_4rlks.int /dev/null phs
line 600+replace_mag.pl rmg2mag_phs 523_4rlks.cor pwr /dev/null 1425
line 600+replace_mag.pl mag_phs2cpx pwr phs flat_PRC_523_4rlks.int 1425
line 600+process_2pass.pl Making the Simulation for baseline reestimation and 2 pass approach
+look.pl Checking I/O
look.pl already done
+dem2diff.pl Making the Simulation for baseline reestimation and 2 pass approach
+make_sim.pl Checking I/O
Creating /Users/insar/Downloads/TEST_DIR/SIM/SIM_4rlks.hgt.rsc
Creating /Users/insar/Downloads/TEST_DIR/SIM/SIM_4rlks.hgt
+make_sim.pl Reading resource file: 523.int.rsc
+make_sim.pl Building ORRM file
+make_sim.pl Reading resource file: /data1/par/ROI_PAC_DIST/TEST_DIR/DEM/SoCal.dem.rsc
Keyword DATUM doesn't exist in /Users/insar/Downloads/TEST_DIR/DEM/SoCal.dem.rsc, returning 0
+make_sim.pl Creating slope file
+gradient.pl Checking I/O
Creating /Users/insar/Downloads/TEST_DIR/DEM/SoCal.slp
Creating /Users/insar/Downloads/TEST_DIR/DEM/SoCal.slp.rsc
+gradient.pl Reading resource file: /Users/insar/Downloads/TEST_DIR/DEM/SoCal.dem.rsc
+gradient.pl Writing resource file: /Users/insar/Downloads/TEST_DIR/DEM/SoCal.slp.rsc
+gradient.pl Writing Gradient.in
+gradient.pl /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-3/installs/gfortran/bin/Gradient Gradient.in
+make_sim.pl Writing resource file: SIM_raw.hgt.rsc
+make_sim.pl Writing IntSim input_file: IntSim.in
+make_sim.pl IntSim IntSim.in & IntSim.out
+make_sim.pl Writing Aik_resample input_file: Aik_resample.in
+make_sim.pl Doing looked down height map
+look.pl Checking I/O
Creating SIM_16rlks.hgt
Creating SIM_16rlks.hgt.rsc
+look.pl Wrote new rscfile
+look.pl Using lookdown routine
+synth_offset.pl Checking I/O
Creating ampmag_cull.off
+synth_offset.pl Getting gross offset
+offset.pl Checking I/O
Creating ampmag_gross.off
Creating ampmag_gross.in
Creating ampmag_gross.out
+offset.pl Reading resource file: 523_4rlks.cor.rsc
+offset.pl Reading resource file: SIM_4rlks.hgt.rsc
+offset.pl Writing resource file: ampmag_gross.off.rsc
+offset.pl Writing input_file: ampmag_gross.in
+offset.pl /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-3/installs/gfortran/bin/ampcor ampmag_gross.in rds & ampmag_gross.out
+synth_offset.pl Culling gross offset
+synth_offset.pl Getting the fine offset
+offset.pl Checking I/O
Creating ampmag.off
Creating ampmag.in
Creating ampmag.out
+offset.pl Reading resource file: 523_4rlks.cor.rsc
+offset.pl Reading resource file: SIM_4rlks.hgt.rsc
+offset.pl Writing resource file: ampmag.off.rsc
+offset.pl Writing input_file: ampmag.in
+offset.pl /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-3/installs/gfortran/bin/ampcor ampmag.in rds & ampmag.out
+synth_offset.pl Culling points
646 points left after culling
+dem2diff.pl Morphing simulation and doing 2-pass
+synth2radar.pl Checking I/O
Creating 523_4rlks_SIM.aff
+synth2radar.pl Registering the height map to the radar
+rect.pl Believes input file is RMG format
+rect.pl Using
Bilinear to interpolate
+rect.pl Checking I/O
Creating radar_4rlks.hgt
+rect.pl Registering to the simulation
+rect.pl /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-3/installs/gfortran/bin/rect rect.in
+diffnsim.pl Checking I/O
Creating 523-sim_PRC_4rlks.int
Creating 523-sim_PRC_4rlks.int.rsc
Creating radar_PRC_4rlks.unw
Creating radar_PRC_4rlks.unw.rsc
+diffnsim.pl Reading resource file: 523.int.rsc
+diffnsim.pl Reading resource file: radar_4rlks.hgt.rsc
+diffnsim.pl Writing resource file: 523-sim_PRC_4rlks.int.rsc
+diffnsim.pl Running diffnsim
line 600+process_2pass.pl Making the deformation models for baseline reestimation
+process_2pass.pl Filtering, making the mask, unwrapping
+look.pl Checking I/O
look.pl already done
+look.pl Checking I/O
Creating 523_4rlks.amp
Creating 523_4rlks.amp.rsc
+look.pl Wrote new rscfile
+look.pl Using lookdown routine
+int2filtmaskunwrap.pl Filtering
+filter.pl Checking I/O
Creating filt_523-sim_PRC_4rlks.int
Creating filt_523-sim_PRC_4rlks.int.rsc
+filter.pl Filtering
line 600+filter.pl /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-3/installs/gfortran/bin/psfilt 523-sim_PRC_4rlks.int filt_523-sim_PRC_4rlks.int
*** weighted power spectrum interferogram filter v1.0 clw 19-Feb-97 ***
#lines in the interferogram file: 648
line 600+int2filtmaskunwrap.pl Form unwrapping mask using phase covariance
+replace_mag.pl cpx2mag_phs filt_523-sim_PRC_4rlks.int /dev/null phs
line 600+replace_mag.pl rmg2mag_phs 523_4rlks.cor pwr /dev/null 1425
line 600+replace_mag.pl mag_phs2cpx pwr phs filt_523-sim_PRC_4rlks.int 1425
line 600+make_mask.pl Checking I/O
Creating phase_var_PRC_4rlks.msk
Creating phase_var_PRC_4rlks.msk.rsc
+make_mask.pl Creating the Mask for Unwrapping
+make_mask.pl cpx2mag_phs
filt_523-sim_PRC_4rlks.int pwr phs 1425
line 600+make_mask.pl phase_slope
filt_523-sim_PRC_4rlks.int phasegrd.cpx
*** phase gradient in range and azimuth with threshold v1.0 clw 4-nov-96 ***
#lines in the interferogram file: 648
processing window, xmin,xmax,ymin,ymax:
processing window size, width, height:
window size size:
phase gradient correlation threshold:
# correlation weights (range,azimuth):
indices,radius,weight:
indices,radius,weight:
indices,radius,weight:
indices,radius,weight:
indices,radius,weight:
indices,radius,weight:
indices,radius,weight:
indices,radius,weight:
indices,radius,weight:
indices,radius,weight:
indices,radius,weight:
indices,radius,weight:
indices,radius,weight:
indices,radius,weight:
indices,radius,weight:
indices,radius,weight:
indices,radius,weight:
indices,radius,weight:
indices,radius,weight:
indices,radius,weight:
indices,radius,weight:
indices,radius,weight:
indices,radius,weight:
indices,radius,weight:
indices,radius,weight:
sum of unnormalized weights:
normalized window coefficients:
indicies,weight:
indicies,weight:
indicies,weight:
indicies,weight:
indicies,weight:
indicies,weight:
indicies,weight:
indicies,weight:
indicies,weight:
indicies,weight:
indicies,weight:
indicies,weight:
indicies,weight:
indicies,weight:
indicies,weight:
indicies,weight:
indicies,weight:
indicies,weight:
indicies,weight:
indicies,weight:
indicies,weight:
indicies,weight:
indicies,weight:
indicies,weight:
indicies,weight:
processing line: 640
output lines: 648
+make_mask.pl phase_mask
filt_523-sim_PRC_4rlks.int phasegrd.cpx sigma 1
#lines in the interferogram file: 648
processing window, xmin,xmax,ymin,ymax:
processing window size, width, height:
# correlation weights (range,azimuth):
indices,radius,weight:
indices,radius,weight:
indices,radius,weight:
indices,radius,weight:
indices,radius,weight:
indices,radius,weight:
indices,radius,weight:
indices,radius,weight:
indices,radius,weight:
indices,radius,weight:
indices,radius,weight:
indices,radius,weight:
indices,radius,weight:
indices,radius,weight:
indices,radius,weight:
indices,radius,weight:
indices,radius,weight:
indices,radius,weight:
indices,radius,weight:
indices,radius,weight:
indices,radius,weight:
indices,radius,weight:
indices,radius,weight:
indices,radius,weight:
indices,radius,weight:
sum of unnormalized weights:
processing line: 640
output lines: 648
+make_mask.pl mag_phs2cpx
pwr sigma phase_var_PRC_4rlks.int 1425
line 600+make_mask.pl int_thr
phase_var_PRC_4rlks.int phase_var_PRC_4rlks_thresh.int
+make_mask.pl cpx2mag_phs
phase_var_PRC_4rlks_thresh.int /dev/null phase_var_PRC_4rlks_thresh 1425
line 600+make_mask.pl add_phs
phase_var_PRC_4rlks_thresh phs final_mask
+make_mask.pl mag_phs2rmg
pwr final_mask phase_var_PRC_4rlks.msk 1425
line 600+int2filtmaskunwrap.pl Unwrapping
+new_cut.pl Checking I/O
Creating filt_523-sim_PRC_4rlks_cut.flg
Creating filt_523-sim_PRC_4rlks_cut.flg.rsc
+new_cut.pl Reading resource file: filt_523-sim_PRC_4rlks.int.rsc
+new_cut.pl Writing resource file: filt_523-sim_PRC_4rlks_cut.flg.rsc
+new_cut.pl /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-3/installs/gfortran/bin/residue filt_523-sim_PRC_4rlks.int filt_523-sim_PRC_4rlks_cut.flg 5 0 648
cannot open output flag file, creating new file: filt_523-sim_PRC_4rlks_cut.flg
insufficient #lines in the file, resetting length: 647
file has insufficient width, resetting width: 1424
initializing flag array...
processing line 600
number of positive residues: 8776
number of negative residues: 8777
total number of residues:
fraction residues:
writing flag array...
+new_cut.pl /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-3/installs/gfortran/bin/trees filt_523-sim_PRC_4rlks_cut.flg
*** connection trees (ARW) v2.0
8-aug-94 par/clw ***
#lines in the file: 648
insufficient #lines in the file, ymax: 647
+unwrap.pl Checking I/O
Creating filt_523-sim_PRC_4rlks_c10.flg
Creating filt_523-sim_PRC_4rlks_c10.flg.rsc
Creating filt_523-sim_PRC_4rlks_c10.unw
Creating filt_523-sim_PRC_4rlks_c10.unw.rsc
+unwrap.pl reading resource file: filt_523-sim_PRC_4rlks.int.rsc
+unwrap.pl doing the correlation mask
+unwrap.pl /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-3/installs/gfortran/bin/corr_flag phase_var_PRC_4rlks.msk filt_523-sim_PRC_4rlks_c10.flg
+unwrap.pl unwrapping
+unwrap.pl /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-3/installs/gfortran/bin/grass filt_523-sim_PRC_4rlks.int filt_523-sim_PRC_4rlks_c10.flg filt_523-sim_PRC_4rlks_c10.unw
# interferogram lines: 648
insufficient #lines in the file, ymax: 647
array width,height (x,y), starting line:
initial seed location (x,y):
initializing phase array values...
reading flag file...
actual seed location (x,y): 712
ping-pong interation, list size :
total ping-pong interations 1035
fraction of the image unwrapped:
writing output file...
output line: 600+process_2pass.pl Baseline Re-estimation
+add_rmg.pl Checking I/O
Creating low_cor_PRC_4rlks.msk
Creating low_cor_PRC_4rlks.msk.rsc
+add_rmg.pl Adding back
+add_rmg.pl /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-3/installs/gfortran/bin/add_rmg phase_var_PRC_4rlks.msk \
filt_523-sim_PRC_4rlks_c10.unw \
low_cor_PRC_4rlks.msk \
+add_rmg.pl Checking I/O
Creating baseest_4rlks.msk
Creating baseest_4rlks.msk.rsc
+add_rmg.pl Adding back
+add_rmg.pl /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-3/installs/gfortran/bin/add_rmg low_cor_PRC_4rlks.msk \
radar_PRC_4rlks.unw \
baseest_4rlks.msk \
+add_rmg.pl Checking I/O
Creating total_523_4rlks.unw
Creating total_523_4rlks.unw.rsc
+add_rmg.pl Adding back
+add_rmg.pl /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-3/installs/gfortran/bin/add_rmg filt_523-sim_PRC_4rlks_c10.unw \
radar_PRC_4rlks.unw \
total_523_4rlks.unw \
+phase2base.pl Checking I/O
Creating phase2base.out
+phase2base.pl Reading resource file: 523_cull.off.rsc
+phase2base.pl Reading resource file: radar_4rlks.hgt.rsc
+phase2base.pl Reading resource file: pha4baseest.unw.rsc
+phase2base.pl Writing baseest input_file: phase2base.in with QUAD fit
+phase2base.pl write_baseline.pl 523_baseline.rsc SIM -21.547 5.1.4 -80.784 1.4 -2.8
+process_2pass.pl Use Bsim to re-remove topo from unwrapped pair
+process_2pass.pl re-doing 2-pass (based on old unwrapped file!)
+diffnsim.pl Checking I/O
Creating 523-sim_SIM_4rlks.int
Creating 523-sim_SIM_4rlks.int.rsc
Creating radar_SIM_4rlks.unw
Creating radar_SIM_4rlks.unw.rsc
+diffnsim.pl Reading resource file: 523.int.rsc
+diffnsim.pl Reading resource file: radar_4rlks.hgt.rsc
+diffnsim.pl Writing resource file: 523-sim_SIM_4rlks.int.rsc
+diffnsim.pl Running diffnsim
line 600+process_2pass.pl Create tobegeocoded=filt_523-sim_SIM_4rlks_c10.unw file
+add_rmg.pl Checking I/O
Creating filt_523-sim_SIM_4rlks_c10.unw
Creating filt_523-sim_SIM_4rlks_c10.unw.rsc
+add_rmg.pl Adding back
+add_rmg.pl /Users/insar/Downloads/ROI_PAC_3_1beta/ROI_PAC/multibuild-3/installs/gfortran/bin/add_rmg total_523_4rlks.unw \
radar_SIM_4rlks.unw \
filt_523-sim_SIM_4rlks_c10.unw \
+process_2pass.pl Geocoding
+radar2geo.pl Making mapping file
+make_geomap.pl Checking I/O
Creating /Users/insar/Downloads/TEST_DIR/GEO/geomap_4rlks.trans.rsc
Creating /Users/insar/Downloads/TEST_DIR/GEO/geomap_4rlks.trans
+make_geomap.pl Reading resource file: filt_523-sim_SIM_4rlks_c10.unw.rsc
+make_geomap.pl Building ORRM file
+make_geomap.pl Reading resource file: /Users/insar/Downloads/TEST_DIR/DEM/SoCal.dem.rsc
+make_geomap.pl Creating slope file
+gradient.pl Checking I/O
gradient.pl already done
+make_geomap.pl Writing IntSim input_file: IntSim.in
+make_geomap.pl IntSim IntSim.in & IntSim.out
+make_geomap.pl Writing resource file: geomap_4rlks.trans.rsc
+radar2geo.pl Geocoding filt_523-sim_SIM_4rlks_c10.unw
+geocode.pl Checking I/O
Creating geo_523.unw
Creating geo_523.unw.rsc
+geocode.pl Reading resource file: geomap_4rlks.trans.rsc
+geocode.pl Reading resource file: filt_523-sim_SIM_4rlks_c10.unw.rsc
+geocode.pl Writing resource file: geo_523.unw.rsc
+process_2pass.pl That's all folks
参考知识库
* 以上用户言论只代表其个人观点，不代表CSDN网站的观点或立场
访问：3533次
排名：千里之外