提交成功网址, 将会在1-3分钟内筛选收录到网盘007, 感谢您的支持！
Samsung+NVMe+drivers+v1.4.7.17+WHQL+for+Win10.rar
扫描二维码手机访问
分享文件：3 个
&&被关注：0 次
分享扩散：
/share/link?shareid=&uk=..
/share/link?shareid=&uk=..
/share/link?shareid=&uk=..
/share/link?shareid=&uk=..
/share/link?shareid=&uk=..
/share/link?shareid=&uk=..
/share/link?shareid=&uk=..
/share/link?shareid=&uk=..
/share/link?shareid=&uk=..
/share/link?shareid=&uk=..
/share/link?shareid=&uk=..Dell New XPS 15 更新 SSD 驱动教程
之前看到有人发 Surface Pro 4 评测，里面提到 PM951 需要手动更新驱动。XPS 15用的也是 PM951，但是直接安装驱动却装不上。后来察觉必须在 BIOS 中把 SATA 模式从默认的 RAID 改为 AHCI。以下是教程：(此步骤非必需)0、更新 BIOS 驱动：[url]/FOLDER/XPS_.7.exe[/url]1、下载驱动三星NVMe驱动：[url]/ecomobile/ssd/update15.do?fname=/Samsung_NVMExpress_Driver_rev10.zip[/url]2、win + R 运行 msconfig，改为安全模式启动[img]./mon_/436_567373aae3cd1.png[/img]3、重启机器，在启动时按F12进入boot菜单，选bios setup。在sata选项中从 RAID 改为 AHCI，保存，退出4、机器会进入安全模式，在安全模式中再次进入msconfig，把启动方式改回正常启动，重启。5、这时候AS SSD上已经可以看到绿字是stornvme而不是以前的storahci，说明改成功了。但是跑分依然很烂。[img]./mon_/436_78e.png[/img]6、安装之前下载的 NVMe 驱动，跑分。[img]./mon_/436_be30c.png[/img]希望对大家有帮助，有问题可回贴，看到会答复。
能说一下有啥用么，我也是入手不久的xps 15
[quote][pid=23959,1]Reply[/pid] [b]Post by [uid=629690]huying1996[/uid] ( 11:12):[/b]能说一下有啥用么，我也是入手不久的xps 15[/quote]跑分
打算把乞丐版的32G换掉，收集下技术贴Recommended AHCI/RAID and NVMe Drivers
Fernando's Win-RAID Forum (Storage Drivers - BIOS Modding)
Recommended AHCI/RAID and NVMe Drivers
Page 1 of 40
Topic settings
Jump to forum
General & Forum related Topics
Important Drivers (AHCI/RAID, NVMe, USB etc.)
BIOS Modding
System Performance
Special Topics
Preliminary notes:Many AHCI and RAID users are unsure or don't even know, which AHCI/RAID driver will give them the best results regarding stabilty and performance. They either don't have the time or are not interested to do intensive tests comparing the different types and versions of the available AHCI/RAID drivers, which are or may be suitable for their system.It is a fact, that there are no drivers available, which will be optimal for everyone. Simple reason: Each system (Hardware + Software) is different and the preferences of the users as well. This makes it very problematic to give any recommendation regarding the choice of the AHCI/RAID driver.Nevertheless I started this thread with the intention to help unsure users to find &the needle in the hay&.Recommended AHCI/RAID and NVMe Driversfor 32/64bit Windows Operating Systems(Last updated: 12/23/2016)A. AMD AHCI and RAID DriversDownload links and infos:a) AMD's &pure& AHCI Drivers (only AHCI mode supported)for Win8/8.1/10 (32/64bit):These are the newest AMD AHCI drivers (dated 03/19/2015), WHQL certified and suitable for AMD AHCI Controllers DEV_, DEV_ and DEV_: () ()Here are older AMD AHCI drivers (dated 03/21/2014), only suitable for AMD AHCI Controllers DEV_
and DEV_, but maybe better performant than the latest ones: () ()for Win7/Vista (32/64bit):These are the newest AMD AHCI drivers (dated 03/29/2015), WHQL certified and suitable for AMD AHCI Controllers DEV_, DEV_ and DEV_: () ()Here are older (dated 11/06/2013), but maybe better performant AMD AHCI drivers than the latest ones (look ), natively supported are DEV_ and DEV_: () ()for Windows XP (32/64bit):as &real& AHCI drivers: () This 32bit driver is dated 01/08/2014 and only usable with AMD AHCI SATA Controllers DEV_7801 and DEV_7804. The file named TXTSETUP.OEM has been customized by me for a proper Windows XP installation. Thanks to EmmaRoyd for the source package.Until now I didn't find a 64bit version of the AMD AHCI driver v6.1.3.35. If anyone should have a link, please let me know it. () () These drivers are dated 10/28/2011 and usable with AMD AHCI SATA Controllers DEV_ and DEV_. Thanks to zir_blazer for having directed me to the source package.as &AHCI compatible RAID drivers&:There are other AHCI supporting AMD drivers for XP (32/64bit) available, but they are in fact RAID Drivers. They are listed below.b) AMD's RAID drivers with AHCI support (&AHCI compatible RAID drivers&)for Windows XP (32/64bit): () ()These AMD AHCI/RAID drivers are dated 06/22/2012, do support the AMD AHCI/RAID Controllers with the
DeviceIDs DEV_93/4394 and DEV03/7804. The TXTSETUP.OEM has been customized by me for a proper integration into a Windows XP resp. XP x64 CD.Users of an older AMD system from SB600 up may try a modded variant of these AMD AHCI compatible RAID drivers (additionally supported DeviceIDs: DEV_): () ()Note: Due to the modification of the related text (.INF and .OEM) files the driver installation has to be forced by using the &Have Disk& option.c) AMD's &pure& RAID drivers (only RAID mode supported)for Win10 (32/64bit): () ()These AMD RAID drivers are dated 07/26/2016 and suitable only for AMD RAID Controllers DEV_ 7805 (model &Bolton&). They have been designed for Win10, but may work with Win7/8.1 as well.for Win8/8.1 (32/64bit): () ()These AMD RAID drivers are dated 10/08/2013 and suitable for AMD RAID Controllers DEV_ 4392, DEV_4393, DEV_7802 and DEV_7803.for Win7/Vista (32/64bit): () ()These AMD RAID drivers are dated 12/10/2012 and suitable for AMD RAID Controllers DEV_4392, DEV_4393, DEV_7802 and DEV_7803. Thanks to Pacman for the drivers.for Windows XP (32/64bit) as AHCI compatible RAID drivers:There are no &clean&& AMD RAID drivers for Windows XP (32/64bit) available.
B. ASMedia 106x SATA3 AHCI/RAID DriversDownload links and infos:a) pure drivers:for Win8-10 (32/64bit): () ()for Vista-Win7 (32/64bit): () ()for Windows XP/Server bit): () ()The above listed latest ASMedia 106x AHCI/RAID drivers v3.2.1.0 WHQL are dated 05/17/2016 and suitable for Win8/8.1/10 resp. Vista/Win7, whereas the latest ASMedia 106x AHCI/RAID drivers for XP/W23 are v3.2.0.0 WHQL and dated 03/28/2016.Thanks to our Forum member shroeder for the source package.b) complete Set with Installer: ()This complete Installer Set is dated 06/02/2016 and contains all above listed ASMedia 106x SATA3 AHCI/RAID drivers. Thanks to our Forum member shroeder for the source package.
C. Intel AHCI/RAID and NVMe Driversa) Intel AHCI/RAID DriversDownload links and infos:Intel RST drivers:(usable with nearly all Intel chipset systems)Intel RST drivers v11.2.0.1006(dated 05/30/2012, recommended for all AHCI/RAID users with an Intel Southbridge from ICH7R/M up, usable with all Windows Operating Systems from XP up):a) Original Drivers and Sets:The related download links can be found within the start post of
thread.b) Modded Drivers and Sets:You can find the related download links .Compatibility:AHCI mode: The WHQL certified 32/64bit drivers v11.2.0.1006 do not support ICH8R/M, ICH9R, ICH8/9/10, X79 and 8-Series chipset AHCI systems, whereas the modified drivers do support all Intel AHCI systems from ICH7R/M up.RAID mode: The WHQL certified 32/64bit drivers v11.2.0.1006 do not support ICH7R/ICH7M and X79 chipset RAID systems, whereas the modified drivers do support all Intel RAID systems from ICH7R/M up.Comments:These are the latest and probably last &classical& Intel RST AHCI/RAID drivers, which are managing the Intel SATA AHCI/RAID Controller with just 1 single driver named iaStor.sys.&TRIM in RAD0& is supported (Precondition: An actual Intel RAID ROM or EFI RAID &SataDriver& from v11 up is present within the BIOS).Advantages:a) They are running absolutely stable and will give the users AHCI/RAID system a very good performance (especially if being used with SSD RAID0 configuration).b) They are the last Intel AHCI/RAID drivers, which do fully support Windows XP (32/64bit).Disadvantage:Not all features of the newest Intel chipsets will be supported.Intel RST(e) drivers v12.9.4.1000(dated 04/24/2014, recommended for all AHCI/RAID users with an Intel 5-, 6- or 7-Series Chipset system, only usable with Windows Operating Systems from Win7 up):a) Original Drivers and Sets:The related download links can be found within the start post of
thread.b) Modded Drivers and related original Software Set:You can find the related download links .Compatibility:AHCI mode: The original 32/64bit drivers v12.9.4.1000 WHQL do not support any Intel ICH7-ICH10 Southbridge, whereas the modified drivers do support them additionally.RAID mode: The original 32/64bit drivers v12.9.4.1000 WHQL do not support ICH7R/ICH7M and X79 chipset RAID systems, whereas the modified drivers may support them additionally.Comments:These are the latest of Intel's AHCI/RAID drivers of the v12 series and primarily designed for the Intel 6- and 7-Series Chipsets.Contrary to the &classical& Intel RST drivers the RST(e) drivers are working with an additional SCSI filter driver named iaStorF.sys.&TRIM in RAID0& is supported (Precondition: An up-to-date Intel RAID ROM or EFI RAID &SataDriver& from v11 up is present within the BIOS).Advantage:These drivers do support some new features, which partially can be used by users with an Intel AHCI/RAID system, which is not up-to-date anymore.Disadvantage:The WRITE performance with Intel RAID0 systems is not as good as with the &classical& Intel RST driver v11.2.0.1006.Intel RST(e) drivers v13.1.0.1058(dated 05/02/2014, recommended for all AHCI users with an Intel 7-Series or X79/X99 Chipset system, only usable with Windows Operating Systems from Win7 up):Original Drivers and Sets:The related download links can be found within the start post of
thread.Compatibility:AHCI mode: The original 32/64bit drivers v13.1.0.1058 WHQL do support all Intel 7-, 8- and 9-Series Chipsets (incl. X79 and X99 Chipsets).RAID mode: The original 32/64bit drivers v13.1.0.1058 WHQL do support all Intel Southbridges/Chipsets from ICH8R up and X79/X99 Chipset running in RST mode (DEV_2822).Comments:These are the latest of Intel's AHCI/RAID drivers, which natively do support Intel 7-Series Chipsets.Contrary to the &classical& Intel RST drivers the RST(e) drivers have an additional SCSI filter driver named iaStorF.sys (not relevant for Win8/10).&TRIM in RAID0& is supported (Precondition: An up-to-date Intel RAID ROM or EFI RAID &SataDriver& from v11 up is present within the BIOS).Advantage:These drivers do support some new features, which partially can be used by users with an Intel AHCI/RAID system, which is not up-to-date anymore.Disadvantage:The WRITE performance with Intel RAID0 systems is not as good as with the &classical& Intel RST driver v11.2.0.1006.Intel RST(e) drivers v13.2.4.1000(dated 07/25/2014, recommended for all AHCI users with an Intel 8- or 9-Series Chipset system, only usable with Windows Operating Systems from Win7 up):Original Drivers and Sets:The related download links can be found within the start post of
thread.b) Modded Drivers and related original Software Set:You can find the related download links .Compatibility:AHCI mode: The original 32/64bit drivers v13.2.4.1000 WHQL do support all Intel Chipsets from 8-Series up.RAID mode: The original 32/64bit drivers v13.2.4.1000 WHQL do support all Intel Southbridges/Chipsets from ICH8R up and X79/X99 Chipset running in RST mode (DEV_2822).Comments:These are the latest Intel AHCI/RAID drivers, which have been optimized for being used with Intel 8- and 9-Series Chipsets.Contrary to the &classical& Intel RST drivers the RST(e) drivers have an additional SCSI filter driver named iaStorF.sys (not relevant for Win8/10).&TRIM in RAID0& is supported (Precondition: An up-to-date Intel RAID ROM or EFI RAID &SataDriver& from v11 up is present within the BIOS).Advantage:These drivers do support some new features, which partially can be used by users with an Intel AHCI/RAID system, which is not up-to-date anymore.Disadvantage:The WRITE performance with Intel RAID0 systems is not as good as with the &classical& Intel RST driver v11.2.0.1006.Intel RST(e) drivers v14.8.12.1059(dated 08/23/2016, recommended for all AHCI/RAID users with a brandnew Intel chipset system from 100-Series up and for Intel X99 Chipset systems running in AHCI mode, only usable with Windows Operating Systems from Win7 up):a) Original Drivers and Sets:The related download links can be found within the start post of
thread.b) Modded Drivers and related original Software Sets:You can find the related download links .Compatibility:AHCI mode: The original 32/64bit drivers v14.x.x.xxxx do not support any Intel ICH7-ICH10 Southbridge or 5-7 Series Chipset system, whereas the modified drivers do support them additionally.RAID mode: The original 32/64bit drivers v14.x.x.xxxx do not support ICH7R/ICH7M and X79 chipset RAID systems, whereas the modified drivers may support them additionally.Comments:These are the currently latest Intel AHCI/RAID drivers of the v14 platform and primarily designed for the Intel 100-Series and Z99 Chipsets.Contrary to the &classical& Intel RST drivers the RST(e) drivers have an additional SCSI filter driver named iaStorF.sys (not relevant for Win8/10).&TRIM in RAID0& is supported (Precondition: An up-to-date Intel RAID ROM or EFI RAID &SataDriver& from v11 up is present within the BIOS).Advantage:These drivers do support some new features, which partially can be used by users with an Intel AHCI/RAID system, which is not up-to-date anymore.Disadvantage:The performance with Intel RAID0 systems has not yet been fully optimized by Intel.Alternative for Intel 8-/9-Series Chipset AHCI/RAID systems:A good alternative is the usage of the very fast and stable running Intel RST(e) drivers v13.2.4.1000 or v13.6.3.1001, which can be found
(original drivers) resp.
(modded drivers).Intel RST(e) drivers v15.2.5.1035(dated 11/17/2016, recommended for all AHCI/RAID users with a brandnew Intel chipset system from 100-Series up, only usable with Windows Operating Systems from Win7 up):a) Original Drivers and Sets:The related download links can be found within the start post of
thread.b) Modded Drivers and related original Software Sets:You can find the related download links .Compatibility:AHCI mode: The original 32/64bit drivers v15.x.x.xxxx WHQL do only support Intel 100- and 200-Series Chipset systems.RAID mode: The original 32/64bit drivers v15.x.x.xxxx WHQL may be installable with older Intel Chipsets/Southbridges from ICH8R up (due to the universal external DeviceID DEV_2822), but will only work flawlessly with Intel 100-/200-Series Chipset systems.Comments:Due to the problems the user will get once the related driver is running, I do not recommend to install any Intel RST(e) driver of the v15 platform onto an older Intel system (incl. Intel 8/9-Series and X99 Chipsets).Intel RST Enterprise drivers:(only usable with C600/C600+ Series Chipsets like X79 and X99 running in RSTe mode)Intel RSTe drivers v4.5.6.1004(dated 09/22/2016, recommended for X99 Chipset systems with an Intel RSTe sSATA Controller, usable with Windows 8.1 and Win10):Original Drivers and Sets:The related download links can be found within the start post of
b) Intel NVMe DriversDownload links and infos:Intel NVMe drivers v1.8.0.1011 WHQL: () () ()Notes: These Intel NVMe drivers are dated 10/25/2016, WHQL certified and usable with all Intel NVMe SSDs of the P/P/DC P3520/DC P3608 Series. Supported are all Windows Operating Systems from Win7 up.Intel RSTe NVMe RAID drivers v4.5.0.2122 WHQL: () () () ()Notes: These Intel NVMe RAID drivers are dated 01/14/2016 and WHQL certified. Supported are only Intel& Xeon Processor systems with an Intel C610 series chipset and Intel& Xeon Processor systems with an Intel C230 series chipset running Intel NVMe SSDs of the /P Series. ()Notes: This Installer Set is dated 08/16/2016 and includes the above mentioned RSTe NVMe RAID drivers v4.5.0.2122 WHQL and the related Intel RSTe Software v4.5.0.2125. Supported are only Intel& Xeon Processor systems with an Intel C610 or C230 Series chipset running Intel /P Series NVMe SSDs.
D. JMicron JMB 36x RAID DriversDownload links and infos:Latest/best JMicron JMB 36x RAID drivers: () ()These JMicron JMB36x RAID drivers are dated 09/17/2012 and usable with Win8, Win7, Vista and XP (32/64bit). The 32/64bit TXTSETUP.OEM files have been separated and re-customized by me at 10/23/2014.
E. Marvell AHCI/RAID DriversDownload links and infos:a) Marvell 61xx SATA2 RAID drivers: () () These Marvell 61xx RAID drivers are dated 05/23/2012 and usable with Win8, Win7, Vista and XP (32/64bit).b) Marvell 91xx + 92xx SATA3 AHCI/RAID drivers:Here are the latest Marvell SATA3 drivers for Win10 (32/64bit): ()These Marvell 91xx/92xx AHCI/RAID drivers are dated 01/26/2016, WHQL certified and usable with Windows 10 (32/64bit). Thanks to Station-Drivers for the source package. It has to be verified by Marvell users, whether these drivers do support Trim.These are the latest Marvell SATA3 drivers for Win7-8 (maybe even usable from XP up): ()These Marvell 91xx/92xx AHCI/RAID drivers are dated 01/26/2016 and maybe usable with all Windows Operating Systems from Windows XP up (32/64bit). Thanks to Station-Drivers for the source package. It has to be verified by Marvell users, whether these drivers do support Trim.And here are the latest Marvell SATA3 SCSI Miniport drivers for XP and W2k3 (32/64bit): () ()These Marvell 91xx/92xx AHCI/RAID Miniport drivers are dated 06/21/2013, digitally signed by Marvell and usable with Windows XP and Server bit). Thanks to shroeder for the links and the related infos.Note: Some TXTSETUP.OEM files of the listed Marvell AHCI/RAID drivers have been customized by me for an easier and safer OS integration.
F. NVIDIA nForce AHCI/RAID DriversDownload links and infos:A. NVIDIA nForce AHCI/RAID drivers for Vista and up (32/64bit):a) latest AHCI drivers for NVIDIA MCP65-89 systems running in AHCI mode: () ()These NVIDIA nForce AHCI drivers are dated 05/18/2012 and digitally signed by NVIDIA. They support all AHCI capable NVIDIA nForce chipsets (from MCP65 up). Credits go to Musafir_86 for the source package.b) SATA+RAID drivers for LEGACY mode nForce4 SATARAID systems: () ()These NVIDIA nForce SATA_IDE and SATARAID drivers are dated 08/09/2007 and suitable for LEGACY mode nForce4 SataRAID systems. c) SATARAID drivers for NVIDIA MCP51+55 SataRAID systems: () ()These NVIDIA nForce SATARAID drivers are dated 01/17/2008 and the best performant ones for MCP51 and MCP55 Chipsets.d) latest SATA_IDE driver for LEGACY mode nForce4 RAID systems: () ()These NVIDIA nForce SATA_IDE drivers are dated 05/18/2012 and digitally signed by NVIDIA. They can be loaded to get Win7/8/10 installed onto a LEGACY mode nForce4 RAID array.Complete nForce chipset driverpacks for Win7/Vista inclusive the related nForce AHCI and RAID drivers can be found within
thread.B. NVIDIA nForce AHCI and RAID drivers for XP (32/64bit):These drivers can be found within
G. OCZ (Toshiba) NVMe DriversDownload links and infos:latest OCZ NVMe drivers for Win7-10 (32/64bit): () () ()All these OCZ NVMe drivers are dated 05/13/2016 and WHQL certified. The Set is dated 06/10/2016. Thanks to 100PIER for the link to the source package.
H. Samsung NVMe DriversDownload links and infos:latest Samsung NVMe drivers for Win7-10 (32/64bit):Samsung NVMe drivers v2.0.0.1607 WHQL: () ()Thanks to Guru3D for the source package, to NIK1 for the info and to tistou77 for the extraction of the pure drivers.Notes:The included 64bit Samsung NVMe drivers is dated 10/10/2016 (newer than the v2.4.7.0 ones), WHQL certified by Microsoft and obviously has been designed by Samsung to be used with Win8/8.1/10.Contrary to the v2.4.7.0 drivers these newer Samsung NVMe drivers work without an additional SCSI Filter driver.Samsung NVMe drivers v2.4.7.0 WHQL: () ()Thanks to Pacman for the link to the Installer Set.Notes:The included 32/64bit Samsung NVMe drivers are dated 08/04/2016, WHQL certified by Microsoft and seem to be usable with all Windows Operating Systems from Win7 up.Contrary to the newer v2.0.0.1607 drivers these Samsung NVMe drivers include an additional SCSI Filter driver.Compatibility and Performance of the above offered Samsung NVMe drivers:Both Samsung NVMe driver versions do support the Samsung NVMe Controllers with the DeviceIDs DEV_A802 and DEV_A804, which are within Samsung's most popular consumer NVMe SSDs like SM951, SM961, SM961 SED, PM961 and 950 Pro SSDs.Recently I have tested the performance of different NVMe drivers while running Win10 x64 on my Samsung 950 Pro SSD. The benchmark results can be found .
I. Silicon Image RAID DriversDownload links and infos:Silicon Image Sil31x12 RAID drivers for Win7, Vista (32/64bit) and XP: () ()These Silicon Image Sil31x12 RAID drivers are dated 02/03/2010 and digitally signed by Silicon Image. The 64bit driver cannot be used with Windows XP x64, because the TXTSETUP.OEM is missing.
J. VIA RAID DriversDownload links and infos:a) VIA RAID drivers for Win7Vista (32/64bit): () ()These VIA RAID drivers are dated 03/15/2011 and designed for Vista and Win7 (32/64bit).b) VIA RAID drivers for XP (32/64bit): () ()These VIA RAID drivers are dated 11/18/2010, designed for Windows XP (32/64bit) and contain a TXTSETUP.OEM, which has been customized for an easy integration.
Additional remarks:The listed drivers only belong to on-board AHCI and RAID Controllers. Other extern AHCI/RAID Controllers (on PCI cards etc.) have not been included.The information (= .INF) files of some linked driverpacks have been customized by me to make the associated drivers usable with as many different Controllers as possible. Although I have done my very best while customizing the INF files, the use of the &modded& driverpacks will be at own risk. Before you install any of my &modded& driverpacks, you should have read the last chapter of
start post.All linked XP and XP x64 AHCI and RAID drivers are already prepared for an easy and successful integration into a Windows XP resp. XP x64 CD.Some of the linked XP driverpacks differ from the original driverpack regarding the folder structure and the content of the file named TXTSETUP.OEM, which is needed at the beginning of the XP installation to detect the HDD/SSD/RAID. The only reason for my customization was to make the AHCI/RAID driver integration as easy as possible and to minmize the risk of a later XP installation failure. None of my modifications has any impact on the functionality of the real drivers (= .SYS files), which have always left absolutely untouched.If I should have forgotten the drivers of an important on-board AHCI/RAID Controller or if you should find a newer resp. better driver, please let me know it (with a link to the related driver).Good luck!Fernando
Typo in C.2:Intel RST(e) drivers v11.6.0.1033 WHQL dated 04/22/2013 (recommended for all AHCI/RAID users with a chipset from 6-Series up, only usable with Win7 and Win8)You should read V12.6.O.1033
@ 100PIER:Thanks for your reference to the typo within the start post.It's meanwhile corrected.
HiHere is AMD RAID driver, 3.8.1540.7 For Win8, Only 64bit.
has attached files to this post
im Beitrag Here is AMD RAID driver, 3.8.1540.7 For Win8, Only 64bit.Thanks for the driver. Where did you find it?Interesting: According to the INF file this driver is dated 12/12/2012!
im Beitrag Zitat von
im Beitrag Here is AMD RAID driver, 3.8.1540.7 For Win8, Only 64bit.Thanks for the driver. Where did you find it?Interesting: According to the INF file this driver is dated 12/12/2012!It is from HP, 3.8.1540.3 is 09/21/2012 though :)
im Beitrag It is from HP, 3.8.1540.3 is 09/21/2012 though :) Thanks, the 64bit driver is now listed within the start post.
Today (08/27/2013) I have updated the start post of this thread.Changelog:32/64bit Intel RST(e) AHCI & RAID drivers v12.8.0.1016 WHQL dated 08/02/2013Intel RST(e) Drivers & Software Set v12.8.0.1016 WHQL dated 08/09/201332/64bit Intel RST(e) AHCI & RAID drivers v12.8.0.1016 mod by Fernando32/64bit Marvell 91xx/92xx AHCI & RAID drivers v1.2.0.1038 for Win8/Win7/Vista dated 06/20/201332/64bit Marvell 91xx/92xx AHCI & RAID drivers v1.2.0.1038 for XP/XPx64 dated 06/20/2013Have fun!Fernando
Today (09/18/2013) I found within the AMD Catalyst Motherboard/IGP package 13.9 new AMD AHCI drivers for Win8.1, Win8 and Win7/Vista.Meanwhile I have updated the start post of this thread.Changelog:32/64bit AMD AHCI drivers v1.3.1.156 WHQL for Windows 8.1 dated 07/23/201332/64bit AMD AHCI drivers v1.3.1.154 WHQL for Windows 8 dated 06/28/201332/64bit AMD AHCI drivers v1.2.1.349 WHQL for Win7Vista dated 06/27/2013Have fun!Fernando
My current System:Mainboard: ASUS Z77-V, Disks: 2x256 GB Samsung 840 Pro as RAID0, Graphics: Intel HD4000, OS: Windows 8.1 Pro x64
please no italics (does not read nice)..
Asus Maximus VI F I7-4770K; Corsair H80i; 2x Samsung 840 Pro 256Gb (raid-0); 4x Corsair Force GT 120Gb; Windows 8
im Beitrag please no italics (does not read nice)..You are right, but the post you had seen is already deleted. The italic text was caused by the fact, that I had quoted it.I wanted to edit the first post, but hit the &Quote& button by mistake.@ all:Since I forgot it yesterday, I have updated the first post of this thread again.Changelog:new: Original 32/64bit Intel RST(e) drivers v12.8.2.1000 WHQL dated 08/30/2013new: Modded 32/64bit Intel RST(e) drivers v12.8.2.1000new: Intel RST(e) Drivers & Software Set v12.8.2.1000 WHQL dated 09/06/2013
My current System:Mainboard: ASUS Z77-V, Disks: 2x256 GB Samsung 840 Pro as RAID0, Graphics: Intel HD4000, OS: Windows 8.1 Pro x64
Fernando,I slip-streamed your AMD SATA drivers on a clean WinXP-32 via nLite. But for a newer Acer Aspire 5250 laptop (came w/ Win7-64) I get an error 'amd_sata.sys not found'. Should I rename the file/s or modify txtsetup.oem?Please help!Bunty.
Fernando,Additionally, my WinLite CD with all your WinXP-32 driver packs works fine with other Intel/AMD-based laptops. Not sure why the Acer Aspire 5250 complains amd_sata.sys not found.Bunty.
@ abanerus:Hello Bunty,welcome at Win-RAID Forum!Zitat von
im Beitrag I slip-streamed your AMD SATA drivers on a clean WinXP-32 via nLite. But for a newer Acer Aspire 5250 laptop (came w/ Win7-64) I get an error 'amd_sata.sys not found'. Should I rename the file/s or modify txtsetup.oem?The message &Could not find the file xyz.sys& (or similar) can be caused by the following reasons:The media is bad and cannot been read by the OS Setup. & Solution: Create/borrow a readable installation media.The user has integrated a textmode driver, but additionally presses F6 while starting the installation. & Solution: Don't press F6, if you have integrated the needed driver.The TXTSETUP.OEM content is not correct or refers to files, which are not present or not usable. & Solution: The TXTSETUP.OEM has to be modified resp. the missing files have to be added, before the nLite processing hasto be started from scratch.Question:Which driverpack did you integrate and where did you get it?RegardsFernando
My current System:Mainboard: ASUS Z77-V, Disks: 2x256 GB Samsung 840 Pro as RAID0, Graphics: Intel HD4000, OS: Windows 8.1 Pro x64
Fernando,Thanks I used your AMD drivers for WinXP-32bit & will try again on a new CD-RW disc. I have not pressed the F6 key or modified your TXTSETUP.OEM file.But curious do we need to rename the files from ahcix*.* to amd_sata*.*?Bunty.
Page 1 of 40
notify member via pn
The reason mentioned above will be used. Click , to adjust the content of the private message.