From OSx86
OS X 10.8.2 Hardware Compatibility
Hardware Components
This is a component level hardware compatibility list. We want to keep it as accurate as possible, but please, do not entirely rely on this list when buying hardware. Add which parts you have working in the categories listed below, or create a new category. Please keep alphabetical order inside the categories. The categories themselves are ordered by popularity. Please list any caveats or problems as well.
ONLY add hardware that you have TESTED. Don't add hardware just because you think it might work.
Please add hardware into tables.
This is for 10.8.2 builds only.
For how to edit the Wiki, please see
thread. Thank you!
You're looking for an Installation guide? see
Note: For suggestions about table headings, please join the .
Hardware Name
32/64bit working with patches
Hardware Name
32/64bit working with patches
ASRock P67 Extreme4 Gen3
System configuration:
Intel i7 2600k
DDR3 1600MHz 3x4GB
nVidia GeForce GTX 560 Ti-448 1280MB
Audio Realtek ALC892
LAN Realtek RTL8111E
Component status:
Wireless (Rosewill RNX-N600UBE) works with Ralink RT2870 driver by editing kext with new decimal device ID number
Audio - ACL892 modified AppleHDA and HDAEnable1.kext
Ethernet - Realtek RTL8XXX kext
USB 2.0 - works OOB
Shutdown/Reboot - works OOB
Sleep - ???
GFX - works OOB
Installation method:
myHack with 10.8.2 InstallESD.dmg from AppStore
Post install:
audio and LAN kexts
NOT Working:
Sleep mode
Z77 Extreme 4
Intel i5/3570k
WORKING: LAN, Integrated video, Nvidia Video
NOT WORKING: USB 3 - still some weird issues like lockups or USB locking, audio - weird ports but working, sleep, and weird display artifacts from time to time.
Installed using Chimera
Once OS X 10.8.2 was running on Chimera side I copied the .plist files (smbios and org.chameleon...)
The system would now go into OS X successfully, but not before then.
Inserting a USB Thumb drive locks up OS X, so I insert it prior to booting. Fixed?
Applied the Broadcom network patch using KextWizard
Nvidia GTS 450 - Kept going to a black screen (no signal) once it would hit the login screen. Didn't appear to be an out of range issue with the resolution. I installed the Nvidia Fermi Open CL Patch. That still didn't fix the issue, so I rebooted -x -v -F and got in. Once I was in, I rebooted once again without any boot flags. Failed! Added entries to org.chameleon.Boot.plist: npci=0x2000, PCIRootUID=0
ALC898 Audio Fixed by Applying Realtek AC8XX Patch - kind of. Ports are off.
I installed all of FakeSMC, including plugins, BUT it locked up at the spinning icon. To fix that, I had to download FakeSMC r616 from OSX86.net and copied over manually from terminal. I tried this to fix my artifacts that appeared on the screen. It did NOT work.
Patched Bios version 2.50, Broadcom: 3089-BCM57781.zip (IONetworkingFamily.kext), Nvidia Fermi Open CL Patch, Realtek AC8XX Patch
P45X3 Deluxe
Intel P45/ICH10
Installed using USB , Audio works after installing kext (ALC888),BootLoader Chameleon (latest)
G41MH/USB3
Intel Core Duo 2
Installed using a bootloader on USB, With No-Execute Memory Enabled and PCIRootUID=0. Boot Problem fixed after install.
H77 Pro4-M
Installed using a bootloader on USB, With PCIRootUID=0.
Configuration: Celeron G540, Asus EN210 1GB Gefroce 210 PCIe 16x Graphic, 2x 4GB DDR3, Intel SASAUC8i PCIe 8x SAS Controller, HP NC360T PCIe 4x Dual Gigabit Ethernet, 1x 64GB SSD, 13x SATA 2TB HDD, Bluetooth: D-Links BT-120. Everything OOB.
Sound and onboard Ethernet not OOB not further tested not needed for server use.
All 8 SATA Ports working, USB 3.0 works
Shutdown/Reboot: works
Sleep/ Hibernate / Wake: works
WOL and WOD: works with HP NC360T
BIOS: modded BIOS from , factory settings.
Own DSDT (only removed "\_SB.PCI0.NWAK (Arg0)" from extracted DSDT)
removed NullCPUPowermanagement.kext, Patched_10.7_AppleRTC.kext
Everything working fine (even USB3, HDA, and onboard graphics), only required minor patches to the DSDT, and no BIOS patches were necessary
No BIOS patches, DSDT patched with IRQs and _HID suffix must be all hex digits (GH), used Realtek ALC892 without DSDT patch
H61M-S 1.80
System configuration:
Intel i5 2500k stock clocks
DDR3 1333MHz 2x2Gb
XFX Radeon
Audio Realtek ALC662
Component status:
CPU speedstep works with patch
Audio works - 10.8.2 ALC 662 kexts
Ethernet - Atheros 8151 kext
Wireless - Edimax dongle (Ralink 3070 chip) works with drivers from Ralink
USB 2.0 - Native work
Shutdown/Reboot - Work
Sleep - Work with properly edited DSDT
GFX - 48xx kexts for 10.8.2; dual display working
Installation method:
installation via chameleon
Mountain Lion 10.8; updated with combo update to 10.8.2
Post install
no DSDT required for installation but to get working sleep a properly edited DSDT is required, SSDT required to enable speedstep, GraphicsEnabler=Yes after 48xx kexts, AppleIntelCpuPowerManagement.kext patch required, FAKESMC.kext, AtherosL1cEthernet.kext
Ethernet Built-in required to obtain iCloud and AppS Messages fix with C
NOT Working:
Everything works!
AsRock G41M-VS3 R 2.0
System configuration:
Intel C2Q 83000
8GB Corsair DDR3 1333 RAM
1TB Seagate Barracuda HDD
Nvidia GT 210 1gb DDR3 Silent
Audio VT1705 (VoodooHDA)
Ethernet Atheros (maolj's ethernetL1cEthernet)
Asus N10-USB wireless
Component status:
Audio - works with kext from from
Ethernet - works with AtherosL1cEthernet also from
Wireless - Asus N10 works with this RTL8192SU_MacOS10.6_1079.zip
Shutdown/Reboot - Work
Nvidia GT 210 1gb DDR3 Silent works but cant get dual display to work yet, and hdmi also not tested yet (working with Lion)
Installation method:
BIOS to 1.70 or 1.60 works.
ACPI HPET Table - set to ENABLED
No-Execute Memory Protection - set to ENABLED
using myHack App the only way that works for me, tried many other ways .. all failed.
Post install
install audio and ethernet
Ethernet Built-in required (/Extra/org.chameleon.Boot.plist)
Mac App Store and iCloud working by following this article
NOT Working:
Doesn't wake up from sleep mode
Alternative guide:
If this doesn't work for you you can follow the . It is a bit more in depth than this.
ASROCK Alive SATA2-GLAN
VIA(R) K8T890 CF
System Configuration
CPU = AMD Athlon 64 X2 4600+
RAM = 1 Gig ddr2 800mhz
HDD 1 = ATA IDE IBM Deskstar 20 gig
HDD 2 = SATA Seagate 250 gig
Optical Drive = dvd-cdr
Onboard Realtek RTL81xx
Audio = Onboard ALC888
Graphics = Nvidia Geforce 6200 Turbo Cache
Installation Method
Niresh DVD iso
Component Status
Graphics = Working somewhat. glitches in icons ghosting on the desktop and flashy things
LAN = Using Lnx2Mac
after install its perfect
No success as of yet
USB = Several issues such as connection loss requiring replugging
GENERAL OS = Locks up ALOT. only 1 gig of ram may be a source of this problem. the more the better. Have not yet gotten out of Safe mode. At best it freezes up at where i am thinking it loads Graphics. No flags have helped me past this, and it seems to require my cpu flags to get that far cpus=1 cores=2 busratio=12 is the portion i use.
Installation = Took 3 days to get near a complete install, and have yet to see the "installation successful" screen. at the best i have gotten to "install failed, could not restart from drive" or something close to that. more often installer freezes at "about a minute" But in both cases, i restart off the HDD and just try it. have been successful twice with the cant restart and once with a less than a minute freeze.
Install Bootflags = amd -v GraphicsEnabler=No npci=0x2000 ahcdisk=1 UseKernelCache=No
Get To OSx Bootflags = -v -x GraphicsEnabler=No debug=8 (and maybe the rest of the above here, have had mixed results)
Customizations = Less is more. in fact, experiment with removing items if you think you wont need them. The odds are if you add even one driver your Installer is going to freeze. It probably will anyways.
OSx Mountain Lion on AMD
In General, I would say if you have a good OSx Lion, or Snow Leopard, stay with it. The stability of this on AMD is far far from ideal. It requires too many resources and is more prone to total collapse. There are huge issues with the CPU timings from the AMD chip and OSx ML. The install disk I have does not have an option to run installer without the base system to go back to get more drivers. And many times i had to Boot into Snow Leopard to remove files and make edits on the ML driver and Am still not able to get out of safe mode. And as much as my system freezes up, Im not sure I want to. Go download the OSx ML desktop images and add them to your OSx SnowLeopard. It's not like Apple has broken any real new ground here for the resource cost. If you have my config, Try an install off a true Vanilla. I think you will have greater successs and no niresh customizations (or who knows what else). I appreciate his work in putting this together and being able to try it, but to be honest, it has been the most difficult OSx install I have ever experienced. It is locked up right now as i type because i though I could unmount a script he left for us. And his Lion version never saw the installer. Good luck to the rest of you hardcore AMD fans.
Hardware Name
Patches Used
32/64bit working with patches
AMD 780G + SB700
Using Niresh 10.8.2 ML
Disk Result:
Graphics Lagging
No Sound But Worked With A Little Glitch
You Have To Boot with Installer Disc Then Choose OS X Installed HDD So It Boots (Work On It)
Within Disk Necessarily Only By Customization
By One & Only Mr. Sagar Bedi
P5E-Deluxe
System configuration:
Intel Core 2 Quad 9550K
Chipset Intel X48
MSI GTX 580 Lightning works by default
Wireless Adapter ASUS WL-138g V2
Component status:
Audio - Sim (HDMI and by Audio card)
ASUS WL-138g V2 - Yes
Ethernet - Not tested
USB 2.0 - Yes
Shutdown/Reboot - Yes
Sleep - No
Installation method:
iATKOS ML2
Post install
Install Chimera 2.1.1 (fix iMessenger error)
Line-out (green rear) - Don't show in audio settings
Line-out (black rear) - Back speakers
Line-out (orange rear) - center speaker
Line-out (grey rear) - No sound (probably because I'm using a 5.1 speakers)
NOT Working:
Will sleep fine, but waking doesn't work.
FaceTime (probably i need to have a camera)
Mac App Store and iCloud work now, only with iATKOS ML2 installation.
Intel P965/ICH8
System Configuration:
Install method: App Store purchase. Then App Store Update to 10.8.2
CPU: Intel Q9650 3GHz Detected as Quad-Core Intel Xeon
Memory: Samsung M378T5663EH3-CF73E DDR2 666 MHz 4 x 2Gb, Dual-channel
HDD: SAMSUNG HD103SI 1TB SATA
Video: ASUS GeForce EN210 Silent 512Mb DDR3
Audio: Digidesign MBox2 Pro FireWire, Logitech HD Webcam C510 USB
Ethernet: Realtek(R) PCI-E Gigabit (onboard)
Webcam: Logitech HD Webcam C510
Bluetooth: D-Link DBT-122
Peripherals: Apple Keyboard A1243, Apple Trackpad A1339
PCI cards: ST-Lab FireWire Controller (TSB43AB23 chip), UAD-2 SOLO DSP
Shutdown: Yes
Restart: Yes
Sleep: Not tested
FaceTime/iCloud/App Store: working
Bootloader:
Chameleon v2.1svn r2035
SMBIOS: MacPro3,1
BIOS: SATA in AHCI mode. Disable Serial and Parallel ports. Memory remap, ACPI 2.0, ACPI APIC options enabled.
Kexts: FakeSMC, RealtekRTL81xx
Kernel flags: npci=0x2000 GraphicsEnabler=Yes EthernetBuiltIn=Yes USBBusFix=Yes
Intel X48 - ICH9R SATA
Bios v.0803
System Configuration:
CPU: Intel Core2Quad Q9550 @ 3.4 GHz
GPU: ATI HD 4870 TOXIC 512Mb
RAM: 4x2GB DDR3 Corsair Xms3 1600MHz CL9
Components Status:
Audio - Works with limitation
Ethernet Marvell - Works (PERFECTLY!)
Ethernet Realteck - Disabled for iCloud
WiFi - Not tested, try with
USB - Works (all)
Shutdown/Reboot - Works
Sleep - Not works
iCloud/App Store/FaceTime/iMessage Works
Install method:
installed yet
After Install:
(DON'T RESTART!)
Delete AppleHDA.kext from Extensions folder
Install those kexts into S/L/E
- VoodooHDA 2.7.3
- 3rd Party SATA
- ElliottForceLegacyRTC
- EvOreboot
- NullCPUPowerManagement
System Definition -& Mac Pro 3,1
in Extension folder
Download and run
Run with -v -f flags
P5G41T-M LX3
Intel G41 Express / Intel ICH7
System Configuration:
Video: Intel GMA X4500 (onboard - Not working)
Audio: Realtek ALC887 (onboard)
Ethernet: Gigabite Ethernet (onboard)
Shutdown, Restart and Sleep working
FaceTime, iCloud and App Store are NOT working
Install Method:
10.8.2 App Store Purchase, Restore Basesystem.dmg to pen drive, Modified OSInstall, Chameleon.
Kext Patches:
. Kext Helper to install.
with best sound on any hackint0sh.
P5KPL/1600
Intel G31 / Intel ICH7
System Configuration:
Processor: Intel Core 2 Quad 9550
Video Card: EVGA Nvidia GeForce GTX 550 TI FPB
Audio: VIA VT1708B
Ethernet: Realtek 8110SC Gigabit LAN controller
4GB RAM Kingston 800Mhz
Shutdown and Restart (Sleep not tested, but i didn't apply the fix)
Video w/ dual monitor
Install Method:
iAtkos ML2
Install using secure and verbose mode "-x -v" to avoid kernel panic during install procedure
Disable any audio kext on customization screen
The remaining options set as default
Extra kexts:
(Follow the instructions from the kext package)
(Installed w/ Kext Wizard)
P5KPL-AM/PS
Intel G31/ICH7
System Configuration:
Install method: App Store purchase. Then App Store Update to 10.8.2
CPU: Intel Pentium Dual-Core E GHz
RAM: Kingston 2x2GB DDR2 800 MHz CL6
HDD: WD Cavier Blue SATA II 500 GB
Video: Inno3d GeForce 9500 GT 1 GB DDR2
Usage: These are all works, shutdown ,restart ,FaceTime ,App Store ,iCloud
Bootloader:
Chameleon v2.1svn r2064 (Or The Latest one)
SMBIOS: iMac11,2
BIOS: ACPI 2.0, ACPI APIC options enabled.
Kexts: FakeSMC, RealtekRTL81xx, NVEnabler 64, NullCPUPowerManagement, VoodooHDA 2.7.3 (modified), CUDA
Kernel flags: EthernetBuiltIn=Yes USBBusFix=Yes GenerateCStates=Yes GeneratePStates=Yes UseKernelCache=Yes
Intel 945G/ICH7
System Configuration:
Install method: App Store purchase. Then App Store Update to 10.8.2.
CPU: Intel C2D EGHz (Overclocked to 2.33Ghz)
Memory: Corsair DDR2 667 MHz 2 x 1Gb, Dual-channel
HDD: WD5000AADS-00S9B0 500Gb SATA
Video: GeForce 9500 GT Silent 1024Mb
Audio: M-Audio ProFire 610 (via ST-Lab FireWire Controller vs TSB43AB23 chip)
Ethernet: Realtek(R) RTL8111B PCI-E Gigabit (onboard)
Bluetooth: D-Link DBT-122
Shutdown: Yes, Restart: Yes, Sleep: Not tested
FaceTime/iCloud/App Store: working
Bootloader:
Chameleon v2.1svn r2035
SMBIOS: MacPro3,1
BIOS (v/07): SATA in AHCI mode. Serial and Parallel ports - disabled. Microcode updation, Execute Disable Function, ACPI 2.0, ACPI APIC options - enabled. Enhanced C1 Control, Hyper Path 3, Dram Trolling Threshold, Suspend Mode options - Auto.
Kexts: FakeSMC, RealtekRTL81xx, IOPCIFamily and AppleACPIPlatform ().
Kernel flags: GraphicsEnabler=Yes EthernetBuiltIn=Yes USBBusFix=Yes
If you forget enable Execute Disable Function in BIOS - mach_kernel boot will not start.
If you forget copy IOPCIFamily.kext and AppleACPIPlatform.kext to /S/L/E and rebuild kext cache
- video will not work.
P5Q-Deluxe
Intel P45/ICH10R
System Configuration:
3 GHz - OC Core2Duo Q8300
-- thx to SHAMAUX
Memory: 4 GB DDR2 800 MHz - OC
HDD: 1000 GB SATA
Video: NVIDIA GeForce 9500 GTX+1GB
Audio: Analog Devices ADI2000 (onboard)
Ethernet: modified IONetwork OSX86 (onboard)
Shutdown, Restart and Sleep working
FaceTime, iCloud and App Store working
Install Method:
MyHack+AppleML (10.8) on 2nd HDD Partition ==& Install to 1st Partition
Fix Network by OSX86
Update to 10.8.2 via SW-Update online
Added To "Extra" Folder:
smbios.plist: iMac9,1
org.chameleon.Boot.plist
Kext Patches:
sleepenabler to /S/L/E
AD2000 to /S/L/E
AppleHDA.kext to /S/L/E
Intel P45/ICH10R
System Configuration:
Intel Core2Quad Q8400 - OC @ 3.4 GHz
Bios: 2101 stock modded with SLIC, nothing else.
Memory: 8 GB DDR2 1066 MHz
HDD: 128 GB Crucial M4
Video: NVIDIA GeForce GTX 560Ti
Audio: Analog Devices ADI2000 (onboard)
Ethernet: Marvell Yukon 88E8056 modified IONetwork OSX86 (onboard)
Second Ethernet: Marvell Yukon 88E8001 with kext
Shutdown, Restart and Sleep (with sleepenabler) working.
FaceTime, iCloud and App Store working.
Install Method:
Vanilla ML (10.8) booted with Chameleon 1820, with patched OSInstall.pkg (for MBR), installed directly on the SSD
Fix the Yukon 88E8056 by editing the PNPID inside the IONetworkingFamily kext
Update to 10.8.2 via SW-Update online
Added To "Extra" Folder:
smbios.plist: MacPro 3,1
org.chameleon.Boot.plist with: npci=0x2000 and GraphicsEnabler=Yes
dumped and compiled DSDT and SSDT.
Kext Patches:
sleepenabler to /E/E
skge for the Yukon 88E8001 to /E/E/
AD2000b to /E/E
HDAEnabler to /E/E/
NullCPUPowerManagement to /E/E
AppleHDA.kext to /S/L/E
Extra stuffs:
OpenCL patch for the GTX 560Ti (look in Google for"GeForceGLDriver.bundle opencl perl")
Official nVIDIA CUDA Drivers.
Intel(R) H61(B3)
System configuration:
CPU: Intel(R) Pentium(R) Processor G860 (3.00GHz, 3M Cache)
GPU: AMD Radeon(TM) HD 6670 (1GB DDR3)
RAM: Transcend DDR3 1333MHz 4 GB
LAN: Realtek(R) 8111F
BIOS version: 0802
Installation method:
Using iAtkos ML2 from a flash drive:
1. Formatted the flash drive (8 GB) to Mac OS X Extended (Journaled) [used Master Boot Record]
2. Dragged the iAtkos ML2 DMG to Disk Utility, mounted it and restored it to the newly created partition of the flash drive.
3. Ran the
and installed it to the flash drive.
4. Set HDD as AHCI instead of IDE in Advanced Setup in the BIOS (UEFI) and enabled VT-x as well
6. Booted from the flash drive.
7. Formatted a partition as Mac OS X Extended (Journaled) in Disk Utility and selected the following customizations:
- Bootloader
- Bootloader options: Kernel Cache, Built-in Ethernet (Note: I disabled Graphics Enabler because it wouldn't go past the Apple loading screen. Feel free to experiment.)
- Patches: FakeSMC, Disabler, EvoReboot, RTC Patch
- Mac model: Mac Pro 5,1
- Drivers:
- SATA/IDE: AHCI SATA, AHCI Internal, Non-AHCI SATA
(Note: Don't select Sound! We'll add that later!)
8. Started the system with -v and removed AppleTymcedriver.kext [] (Case-sensitive! Use Tab to autocomplete when using!)
10. Download the driver VoodooHDA 0.2.72 only.
11. Run Kext Utility (It's in Applications/Utilities/Tools) and let it do its thing.
12. Reboot and you should have everything working.
If the sound is too low or the volume slider isn't working,
to fix the common issues (can fix some kernel panics if you're having those!)
Note: You may have to go to System Preferences, Sound, Output and switch it to Line-Out (Green Rear) to hear sounds if you're not using digital-out.
System Configuration:
CPU: Intel Core i5 2400 @ 3.1GHz
GPU: XFX Radeon HD
RAM: 2x4GB DDR3 G.SKILL CL9 RipjawsX
Keyboard: Apple Keyboard
Mouse: Logitech MX518
Components Status:
All works, sleep, wakeup, shutdown, restart, speedstep, USB3.0, HDMI, Updates Through MacAppStore
For HDMI to work together with DVI and two screens on XFX Radeon HD 6870 use AtiConfig=Gibba w/o any modifications on ATI6000Controller.kext and GraphicsEnabler=yes in org.chameleon.Boot.plist
Install method:
Latest Chameleon Bootloader
Kexts (FakeSMC, LNX2Mac's Realtek RTL81xx for LAN, Kext for Realtek ALC892 and USB 3.0 3rd Party)
DSDT and SSDT, smbios.plist from iMac 12,2
Patched AICPUPM.kext (Lion 10.7.3) for Speedstep from InsanelyMac
System Configuration
CPU: Intel i7 2600k @ 4GHZ
Video: Gigabyte 1280MB GTX570
Memory: 16GB Corsair Vengeance Blue DDR3 1600MHZ
Hard Drives: 1x Corsair Force 3 120GB, 3xWD Caviar Black 1TB
Audio: Realtek(R) ALC892
Ethernet: Intel(R) 82579
Firewire: TI 800/400 PCI Card
Card Reader: NZXT Aperture M (through USB2.0 motherboard header)
Peripherals: Logitech MK250 Keyboard/Mouse
Monitors: Dual LG EP Displays
FaceTime/iCloud/App Store:
Bluetooth:
SMBIOS: MacPro3,1
Install Method
BIOS Configuration: version 1101, SATA in ACHI mode, Marvell controllers disabled, Bluetooth disabled
Use USB install - need to use PCIRootUID=0 to get to install screen and first boot
Use DSDT for 1101 BIOS
AUDIO: Realtek ALC892 with DSDT
GRAPHICS: NVIDIA Retail 304.000.00f20 OpenCL Patch
MISCELLANEOUS: USB3.0 Third Party (both)
NETWORK: hnak's AppleIntelE1000 Ethernet
SYSTEM: Patched AppleIntelCPUPowerManagement
BOOTLOADERS: Chimera v1.11.1 R1394
CUSTOMISATION: PCIRootUID=1 fix - IMPORTANT! After install and before reboot need to go into Mackintosh HD-&extras-& and then open org.chameleon.boot.plist and change PCIRootUID=1 to PCIRootUID=0 and save
SSDT OPTIONS: Sandy Bridge Core i7
All booting, restarting and sleeping seems to be stable and hackintosh wakes up from sleep
Updates from App Store work fine and so does installing normal apps
Audio working fine and also works with drivers and external audio processing through Logic Pro 9 and an RME Fireface UFX
Internet worked without kexts in initial installation, but haven't tested wheter or not the kexts are actually needed (just installed them anyway)
USB3.0 Shows up in system profiler as Super-Speed USB bus, but not sure if true USB3.0 speeds are being achieved
TI Chipset firewire card is also being read in a PCI slot but only the 400 ports (no 800 working yet)
Haven't got bluetooth working yet (but not really necessary)
P8Z77-V DELUXE
System Configuration:
Install method: myHack 10.8.0. Then apply Combo update to 10.8.2
CPU: Intel Core i7 Ghz detected as stock Intel Core i7 2600k
Memory: 4x 4Gb G.Skill Ripjaw X 1600Mhz DDR3, Dual Channel at XMP mode
HDD: 4 x 1Tb Seagate Barracuda 7200.12 SATA 2 AHCI mode.
Video: ASUS GTX670 DirectCUII Top
Audio: ALC898
Ethernet: Realtek 8111F + Intel 82579V Gigabit (both onboard)
Bluetooth: BroadCom, Not Working
USB 3.0: Not working
Integrated WiFi: Not Working.
Peripherals: Logitech K520 Keyboard + Mouse Wireless combo
Shutdown: Yes
Restart: Yes
Sleep: Not tested
App Store: Working
Bootloader:
Chimera 1.11.1
SMBIOS: iMac12,1
BIOS: SATA in AHCI mode. Disable Serial and Parallel ports. PCIe Primary Display selected.
Kexts: Intially, only myhack ones. After the update to 10.8.2, added ALC898, Realtek And Intel LAN kexts
Kernel flags: GraphicsEnabler=No. This has to be forced, to avoid whitescreen to appear before installation.
Intel(R) B75, Socket 1155
UEFI Bios ver. 0804 (Updated), HDD connected to 6GB SATA
System Configuration:
CPU: Intel Core i3 GHz (3MB Cache)
GPU: ATI HD 4870 Sapphire 512Mb GDDR5
RAM: 4GB DDR3 Kingston 1333Mhz
HDD: 120GB Seagate (7200RPM 32MB Cache)
Components Status:
Disabled, I am using my DJ Controller Asio Driver (Hercules DJControl Instinct), and it works perfectly
Ethernet Realtek(R) 8111F-VB-CG -
Video/Graphics Card -
Wireless Adapter - Works, Using SMC EZ Connect G
USB2 + USB3 -
Shutdown/Reboot -
iCloud/App Store/FaceTime/iMessage
Install method:
UEFI Sata Configuration: AHCI (All the other settings in the BIOS were default)
Format Disk: Extended Journaled
Normal Mac Instalation (Only needed to add the PS\2 compatibility)
Normal install, 100% compatibility
installed yet
After Install:
Had to change the monitor connector (DVI 1) on my graphics card and rebooted several times, to the other connecter (DVI 2) until the configuration was done (after that no more problems)
LucidLogix(R) Virtu(TM) MVP Technology: Previous Win7 Boost
Nothing else to add
Hardware Name
32/64bit working with patches
Intel G31/ICH7
Realtek RTL8102EL - 10/100 Controller works with RTGMac 2.0.6 installer from Realtek, but crashes almost everytime. So it is not advisable to use. Use a separate USB/PCI WLAN/LAN Card
Used iATKOS ML2, standard install
Hardware Name
Patches Used
32/64bit working with patches
ECS G31T-M
Intel G31/ICH7
System Configuration:
ECS G31T-M (onboard LAN + Audio)
Intel Core 2 Duo E6700
Nvidia GeForce 8400 GS 256M (using DVI)
4GB DDR2-800
SATA Drive formatted as GUID
BIOS: SATA-Enhanced, HPET-Enabled, ACPI-S3, IntelXD Bit-Enabled(very important, otherwise won't boot)
Installation Method:
USB Boot + Mountain Lion app from Appstore. Disable onboard Sound+LAN enable them later.
Install bootloader and some necessary kexts (or copy /Extra from the usb installation disk).
VoodooHDA for the sound (ALC662) to work
Hardware Name
Patches Used
32/64bit working with patches
Hardware Name
Patches Used
32/64bit working with patches
Intel(R) X58 Express Chipset
System Configuration
Network: Onboard Realtek 8111C
Audio: Onboard Realtek ALC888 (Legacy version)
HDD: 1TB WD Caviar Green
Component Status:
Video card works OOB
Audio Works Perfectly Using DSDT
DSDT correctly patched at tonymacx86 dsdt page.
- Works Perfectly using DSDT
I Have my board flashed to 1.6 FI Bios.
Used unibeast.
Only using FakeSMC, no other hacked kexts.
Intel(R) B75 Express Chipset
System Configuration
CPU: Intel Core-i3 3220
Network: Onboard 8188
Audio: on board Realtek HDA/ Externel: Fast Track Pro USB
RAM: 4GB DDR3 1333 MHz
GPU: nVidia Geforce GT 610 2GB
HDD: 1TB WDC SATA II
Component Status:
Video card
Audio Line Out(Green Rear)
Audio Line In(Pink Rear)
- goes to sleep but can't wake up
Mountain Lion 10.8.2 By Niresh (AMD Kernel Patch with Intel Kernel (Atom) support)
Customize while installing to select proper driver
On board Ethernet doesn't detect automatically
GA-G31M-S2C
Intel(R) G31 Express Chipset
System Configuration
CPU: Intel Core2Duo E7300
Network: on board Realtek RTL8101E
Audio: on board ALC662
RAM: 2x Kingston 2GB DDR2 800Mhz
GPU: NVIDIA GeForce 8600 GT
HDD: 40GB IDE(OS) & 500GB SATA(Data Drive)
Component Status:
Video card
Audio Line Out(Green Rear)
Audio Line In(Pink Rear)
- goes to sleep but can't wake up
iAtkos ML2 (default settings)
clean install(upgrade from 10.7.5 also works but with some issues on certain Applications)
boot drive partition MBR, drive format Journaled
built-in Ethernet card not detected after install, used
to resolve
Component Status:
Video card
Audio Line Out(Green Rear)
Audio Line In(Pink Rear)
- goes to sleep but can't wake up
RTGNICv2.0.6For10.7
GA-Z68X-UD4-B3 rev1.0
Intel(R) Z68 Express Chipset
System Configuration:
CPU: Intel Core I5 - 2500k @4600
GPU: Nvidia 480 GTX
RAM: 2x4GB 1600Mhz
Wifi USB Lynx300
Component Status:
Sound works without DSDT, Wifi works with Ralink drivers from ralink?s home page.
GA EP45-UD3R Rev 1.1
Intel(R) P45+ICH10
Core2Duo E8400 processor
Ram 4GB DDR2 800MHz Kingston
Saphire ATI HD MB GDDR5 Vapor - X
Audio 889a|885 Patched
10.8.2 fix it
Then navigate to /System/Library/Extensions/FakeSMC.kext/Contents/Plugins/ and delete OEMsmbios.kext
FakeSMC in S/L/E
NullCPUPowerManagement in S/L/E
AppleHDA ALC889a/885
After Finish Install Realtek Gigabit Ethernet 2.0.6 for 10.7
GA-Z77-DS3H rev1.0
Intel(R) Z77 Express Chipset
System Configuration:
CPU: Intel Core i5 - 3570k
GPU: AMD Radeon HD6670
RAM: Kingstone HyperX 2x4GB 1600Mhz
Component Status:
Install method - Mountain Lion.dmg installed from thumb drive
Then App Store Update to 10.8.2
Gigabyte GA-Z77-DS3H pack
all-in-one post-installation tool designed specifically for this motherboard and UEFI BIOS.
GA-H77-DS3H rev1.1
Intel(R) H77 Express Chipset
System Configuration:
CPU: Intel Core G620
GPU: ASUS 8600GT 512MB
RAM: Kingstone 1x4GB 1333Mhz
Component Status:
Install method - Mountain Lion 10.8.2.dmg installed from hard drive using chameleon 2203.
Shut Down/ Restart
Sleep/Wake up
iCloud, Appstore, Messeges.
FaceTime not tested
FakeSMC in S/L/E
AppleHDA ALC887
ALXEthernet.kext
dsdt in S/L
Gigabyte GA-H77-DS3H(Rev1.1) All in one
Z68AP-D3 uefi BIOS
Intel(R) Z68 Express
System Configuration
CPU: Intel Core-i3
RAM: 8GB DDR3 1333 MHz
GPU: nVidia GeForce 210 1024 МБ
Network: Onboard RTL8111E
Audio: Behringer UCA222 USB
HDD: 120G SSD (OCZ-AGILITY2)
Component Status:
Video card
Audio (I use USB soundcard, do not need to enable it yet)
USB Audio works only in USB2.0 ports.
- Wakes up by keyboard hit w\o problem
Installed using USB stick method. Type "PCIRootUID=0" at boot from thumb drive.
User DSDT or DSDT-Free installation (I have no DSDT)
Realtek Lnx2Mac's
Not tested
GA-Z68P-DS3 rev1.2
Intel(R) Z68 Express Chipset
System Configuration:
CPU: Intel Core i3 - 2100
GPU: AMD Radeon HD6450
RAM: Kingstone HyperX 2x4GB 1333Mhz
Component Status:
Install method - Mountain Lion.dmg installed from thumb drive
Then App Store Update to 10.8.2
System working w/o DSDT with UEFI BIOS
Gigabyte GA-Z68P-DS3 pack
all-in-one post-installation tool designed specifically for this motherboard and UEFI BIOS.
GA-Z68X-UD3H-B3 rev1.3
Intel(R) Z68 Express Chipset
System Configuration:
CPU: Intel Core i5 - 2500K
GPU: Intel HD3000/AMD Radeon HD6850
RAM: Kingstone HyperX 2x4GB 1333Mhz
Component Status:
All works properly with UEFI BIOS (noted few minor issues)
Firewire doesn’t work properly after wake from sleep operation
USB3.0 working but with lower read/write speed
no USB issues with UEFI BIOS!!! (do your homework, check PDF instructions inside post installation tool pack)
Install method - Mountain Lion.dmg installed from thumb drive
Then App Store Update to 10.8.2
System working w/o DSDT with UEFI U1h BIOS
Gigabyte Z68X-UD3H-B3 pack
/ all-in-one post-installation pack designed specifically for this motherboard and OS X 10.8. Fully patched DSDT included + several useful applications...
GA-EP43-DS3L
Intel(R) P43 Express Chipset
System Configuration:
CPU: intel Core 2 Quad qGhz
GPU: nvidia geforce 8800 GT
GPU: nvidia geforce gt 520 x1 Edition
RAM: Corsair 4x2GB 1066Mhz
BIOS: Cartri v.08
Component Status:
Install method - Mountain Lion.dmg
Then App Store Update to 10.8.2
System working NO DSDT
Sound patched with AppleHDA.kext and Legacy
GA-P35-DS3R (rev 1.0)
Intel P35/ICH9R
System Configuration:
Install method: App Store purchase.
CPU: Intel Q9300 @3GHz Detected as Quad-Core Intel Xeon
Memory: TeamGroup DDR2 800 MHz 4 x 2Gb, Dual-channel
HDD: 2x500 GB SATA on RAID 0 (AppleRAID version 2.0 software)
Video: Leadtek GeForce 9800GT Green Edition 512Mb DDR3
Audio: Onboard ALC889A,
Ethernet: Realtek(R) PCI-E Gigabit (onboard)
Webcam: Webcam on monitor from Benq M2200 HD
seen as QEye 2.0M pixel: from Chicony Electronics Co., Ltd.
Peripherals: Apple Keyboard A1243, USB Mouse, Apple Remote with this hack
Install method:
Use this method
to get a functionaly RAID 0. On short you need 3 drives, one to get ML fully installated and configurated an 2 drives to make a RAID 0 and with CCC to clone instalated ML from first drive to the otherd 2 drives wich have RAID 0 configurated.
Custom DSDT.aml
Bootloader:
Chameleon v2.1svn r2059 from here
SMBIOS: MacPro3,1
BIOS settings : SATA in AHCI mode. HPET to 64, Disable Serial and Parallel ports.
Kexts: FakeSMC,
Kernel flags: EthernetBuiltIn=Yes and rd=uuid boot-uuid=your number to your RAID Identifier as Kernel flags
G41MT -D3V (rev. 1.3)
Intel(R) G41 Express Chipset/Intel (R) ICH7
System Configuration:
Install method: Retail install
CPU: Intel DualCore EGhz
Memory: Kingston DDR3 1333 MHz 2 x 2Gb, Dual-channel
HDD: Corsair F60 60GB SSD
Video: Gigabyte GeForce 560GTX(non TI)
1024Mb GDDR5
Audio: Onboard ALC889
Ethernet: Realtek 8111E detect as RTL /1000
Peripherals: Apple Wireless Keyboard , Apple Magic
Install method:
Fresh Install
Purchase Mountain Lion from the Mac App Store
Bootloader:
Chimera v1.11.1 r1394
SMBIOS: MacPro3,1
BIOS settings :
HPET to 64, Disable Serial and Parallel ports.
Kexts: FakeSMC, AppleHDA Realtek 2.0.6 for 10.7, If you use FakeSMC plugins, and get a kernel panic after reboot. Boot into safe mode by typing -x at the Chimera boot screen. Then navigate to /System/Library/Extensions/FakeSMC.kext/Contents/Plugins/ and delete OEMsmbios.kext. Then reboot
Kernel flags: EthernetBuiltIn=Yes, GenerateCStates=Yes, GeneratePStates=Yes
Shut Down/ Restart
Sleep/Wake up
iCloud, Appstore, Messeges.
FaceTime not tested
GA-X58A-UD3R
Intel P58/ICH10R
System Configuration:
Install method: App Store purchase. Then App Store Update to 10.8.2
CPU: Intel i7-970 @3.20GHz
Memory: Corsair DDR3 1600 MHz DominatorGT 3 x 2Gb, Tri-channel
HDD: SSD Kingston 250Gb SATA3, HDD Seagate MomentusXT Hybrid 500Gb SATA2
Video: Asus ATI HD Mb DDR3
Audio: Onboard ALC889,
Ethernet: Realtek(R)
Realtek /1000
Peripherals: Apple Keyboard A1243, USB Mouse.
Install method:
Myhack instaler 10.8.0, later patck 10.8.2
Custom DSDT.aml
Sound 2.0:
Bootloader:
Chimera v1.11.1 r1394
SMBIOS: MacPro5,1
BIOS settings : SATA in AHCI mode. HPET to 64.
GA-Z77X-UD3H
Intel(R) Z77 Express Chipset
System Configuration
CPU: Intel i3-3770 (Ivy Bridge)
GPU: 2X Inno3D Geforce 660 2048MB
chameleon 2012
SMBIOS Mac Pro 3,1
If you want to use GTX 660 Display card,After install completes to reinstall display driver "
FakeSMC.kext
AtherosL1cEthernet.kext
AHCI_3rdParty_eSATA.kext
No DSDT or SSDT
VoodooHDA 0.2.7.4
GA-H67M-UD2H-B3 rev1.0
Intel(R) H67 Express Chipset
System Configuration:
CPU: Intel Core i5 - 2500K
GPU: Intel HD3000
RAM: PNY 2x4GB 1333 Mhz
Network: Realtek RTL 8111E
Audio: ALC 892
Component Status:
Install method - Mountain Lion.dmg 10.8.2 downloaded from App Store installed from thumb drive
Be sure BIOS is F6, use DSDT for F6
DSDT, Realtek network and disks, Mac Mini 5,1 system config (do not install sound)
ALC 892 sound using HDA Rollback
Custom DSDT.aml (from Tonymac for F6)
GA-B75M-D3H
Intel(R) B75 Express Chipset
System Configuration:
CPU: Intel Core i3 - 3225
GPU: Intel HD4000 (internal)
RAM: Kingston HyperX 2x4GB 1600Mhz
Component Status:
All works except for VGA out
DSDT, Realtek network, ALC887 v100302 current,
System working w/o DSDT with UEFI BIOS
Remove HDAEnabler1.kext and use layout-id 0x03, 0x00, 0x00, 0x00 in DSDT/HDEF to enable HDMI audio
GA-EP41-UD3L rev1.2
Intel(R) G41 Express Chipset
System Configuration:
CPU: Intel Core2Quad q9550
GPU: ATI HD 6670
RAM: PNY 2x2GB 800 Mhz
Network: RTL8111C/D(L)
Audio: ALC888
Component Status:
Install method - Mountain Lion.dmg 10.8.2 downloaded from App Store installed from thumb drive
Followed this tutorial
Custom DSDT.aml
IDE/ATA: ?
GA-Z77X-D3H Rev 1.0
Intel(R) Z77 Express Chipset
System Configuration:
CPU: Intel Core i5 - 3750K
GPU: Gigabyte OC Nvidia GT640 2GB
RAM: GSkill 1600MHz 2x 4GB DDR3
SSD: Samsung 830 Series 128GB
Component Status:
Sleep, Graphics out of the box
Only 4 USB ports (top four) on rear work when USB3 mode is on in BIOS (Have not tried USB2 legacy mode). (2x USB3, 2xUSB2)
Front USB3 port working, front USB2 working
No audio without patch
TRIM enabled by default and working!
PCIRootDevice = 1 required for boot (set in boot.plist)
Installed Chimera
System working w/o DSDT with UEFI BIOS, however no audio.
MacPro3,1 System definition
Patch AppleHDA using guide . Look at page 4, for the comment by nickw444 for basic instructions for DSDT modifications
Custom DSDT for sound, see above ^
EvOreboot.kext
Jmicron36xATA.kext
Removed NullCPUPowerManagement.kext to enable sleep
AHCI_3rdParty_SATA.kext
IONetworkingFamily.kext
IO80211Family.kext
AppleACPIPlatform.kext
GA-P41T-D3P Rev 1.5
Intel(R) G41 Express Chipset
System Configuration:
CPU: Intel Core2Quad Q9550
GPU: Zotac NVIDIA GTX 560 1024 MB GDDR5
RAM: Kingmax 2x4GB DDR3 1333MHz RAM
SSD: OCZ Vertex4 VTX4-25SAT3-128GB
Component Status:
Install method - Mountain Lion.dmg 10.8.2 downloaded from App Store installed from thumb drive
Custom DSDT.aml
GA-Q77M-D2H
Intel(R) Q77 Chipset
System Configuration:
CPU: Intel i5 3570
GPU: GA HD
RAM: Adata 2x8GB DDR3 1600MHz RAM
SSD: Intel 330 series 180GB
Component Status:
all works incl. WoW 5.1 ;)
not working: Blu-ray, still not testet: hdmi+dp
Install method - ML install on different System, 10.8.2 downloaded from App Store and installed.
Replaced Ati6000Controller- and AppleACPIPlatform.kext by Version 10.8.1
no DSDT, FakeSMC Plugins
Shutdown, Restart, Sleep:
onboard NIC, SMC:
GA-P55A-UD3R Rev:1,Bios F8
Intel(R) P55 Chipset
System Configuration:
CPU: Intel i7 870
GPU: ATI Radeon HD
RAM: Kingston 2x4GB DDR3 1600MHz RAM
HDD: WD 1TB
Component Status:
not working: hdmi Audio, PS2 keyboard, (Trying to Fix)
Install method - Install using iATKOS ML2 using USB method.
no DSDT, FakeSMC Plugins
Shutdown, Restart, Sleep:
onboard NIC, SMC:
Multiple Monitors:
GA-Z77-D3H (Rev. 1.1)
Intel(R) Z77 Chipset
System Configuration:
CPU: Intel Core i7 2600k
GPU: PNY Geforce 210 1GB
RAM: 8GB Corsair Vengeance DDR3-1600
Hard Drive: Patriot Torqx 2 64GB SSD
Component Status:
Graphics Card works OOB
Audio works (VoodooHDA VT2021)
Sleep works (evOreboot)
CPU Power Management works OOB
Ethernet works (Atheros Ethernet)
USB 2.0 works (All) OOB
USB 3.0 works OOB (Except lower 4 ports)
Shutdown/Reboot Works (evOreboot)
iCloud/App Store/FaceTime/iMessage Works
Install F17f BIOS
Load Optimized Default
Use AHCI instead of IDE
Set xHCI Mode to Auto
Enable EHCI Hand-off
Enable High Precision Event Timer
Install Method:
Boot from USB (-x) - install with iGPU
Wipe disk as GUID and Mac OS Extended (Journaled)
Boot with USB to Drive (-x) still with iGPU
Install UserDSDT or DSDT-Free Install, VoodooHDA VT2021, EvOreboot,FakeSMC,FakeSMC Plugins, Chimera v1.11.1 r1394, Sandy Bridge Core i7 SSDT, iMac 13,1 System Definintion, Atheros Ethernet
Enter BIOS and Disable Integrated GPU and Initialized GPU First to PEG
Boot with -v, PCIRootUID=0, GraphicsEnabler=Yes using Graphics Card
Goto The "Extra" Folder open org.chameleon.Boot.plist and Add Under Kernal Flags add
&string&PCIRootUID=0&/string&
&string&GraphicsEnabler=Yes&/string&
Install 10.8.2 Update Through App Store
Install AppleACPIPlatform.kext 10.8.1
GA-Z77-DS3H rev1.0
Intel(R) Z77 Express Chipset
System Configuration:
CPU: Intel core i5 3470 box
GPU: Gigabyte NVIDIA GTX 650 OC
RAM: G-Skill 2x8GB 1600Mhz
Component Status:
All works except sleep
Install method - Mountain Lion.dmg 10.8.2 installed from USB thumb drive
this tutorial
for a complete install
GA-Z77-DS3H rev1.1
Intel(R) Z77 Express Chipset
System Configuration:
CPU: Intel core i5 3570k box
GPU: EVGA NVIDIA GTX 660 2GB Superclocked (non-Ti)
RAM: Corsair 4x4GB
Storage: Crucial M4 256GB, Seagate Green 2TB, WD Black 2TB
Component Status:
Video card
USB 3.0 Superspeed
FusionDrive
OOB: bootable with Mac OS X 10.8.2 Mountain Lion in USB stick, all working except sound and ethernet - any GTX card needs to be removed when OS X is being installed
Install method - Mountain Lion.dmg 10.8.2 installed from USB thumb drive
bootflag [GraphicsEnabler=No] required after GTX graphic card installation
Use for Audio & LAN installation: ALC887/888b, Atheros ALXEthernet
no DSDT, FakeSMC Plugins
Shutdown, Restart, Sleep:
any CPU overclocking alteration in BIOS option will disable wakeup
onboard NIC, SMC:
- USE ALXEthernet 1.0.2
- ALC 887/888b V100302
Hardware Name
Patches Used
32/64bit working with patches
Intel G41 (ICH7)
System configuration:
CPU: Intel Core 2 Duo E7500
GPU: nVidia GeForce 210 Silent 1GB
HDA: Realtek ALC662
NIC: Realtek RTL8111D
BIOS Settings:
Load Default settings
Boot Device set to Legacy & SATA only
Enable UEFI Boot
Installation method:
Fresh Install of Retail ML 10.8.2 via USB
OS X 10.8.2 Supp Update via AppStore
Shutdown/Reboot
Mac App Store
DVD Player
VGA, HDMI, DVI-D
Not Working:
Sleep/Wakeup
Patched DSDT
NullCPUPowerManagement.kext / Add speedstep dsdt patch
FakeSMC 4.0 Rev.617
Chimera 1.11.1 Bootloader
VoodooHDA 2.7.4 (Two personalities included for on-board audio and HDMI Audio)
RTL81xxx 0.0.90
Intel DG41WV (rev. 0007) (rev. 0015)
Intel(R) G41 Express Chipset/Intel (R) ICH7
System Configuration: (rev. 0007)
Install method: restore BaseSystem.dmg into a pendrive and install Chimera 11.1.1 r1394.
CPU: Intel DualCore EGhz
Memory: Patriot DDR3 800 MHz 2 x 2Gb
HDD: WDC 500GB
Video: GeForce 8400GS 512Mb DDR2 ID 0x10c3
Audio: Onboard ALC662 via edited VoodooHDA:
Ethernet: Realtek RTL8111:
Peripherals: USB Mouse and Keyboard
System Configuration: (rev. 0015)
CPU: Intel(R) Core(TM)2 Quad Processor Q8400
Memory: Kingston DDR3 1064 MHz 2 x 2Gb
HDD: WDC 500GB
Video: GeForce GTX 560 TI TWIN FROZR II 1024Mb GDDR5 ID 0x10de
Audio: Onboard ALC662 via edited VoodooHDA:
Ethernet: Realtek RTL8111:
Peripherals: USB Mouse and Keyboard
*Install method:
Purchase Mountain Lion from the Mac App Store
Restore BaseSystem.dmg into a pendrive and install Chimera 11.1.1 r1394
Copy mach_kernel, kernelcache and boot.efi to pendrive's root.
Put SMBios iMac9,1, org.chameleon.boot (with EthernetBuiltIn=Yes, GenerateCStates=Yes, GeneratePStates=Yes, GraphicsEnabler=Yes) in /Extra
Put FakeSMC in /Extra/Extensions or install it from Chimera
Bootloader:
Chimera v1.11.1 r1394
SMBIOS: iMac9,1 (rev. 0007) - Mac Pro 3.1 (rev. 0015)
BIOS settings :
Sata Mode to AHCI.
Kexts: FakeSMC, AppleHDADisabler, VoodooHDA 0.2.56 (edited) and RealtekRTL81xx.
Kernel flags: EthernetBuiltIn=Yes, GenerateCStates=Yes, GeneratePStates=Yes, GraphicsEnabler=Yes). Problems with USB - add USBBusFix flag
Everything except Sleep/Wake
Intel DX58SO
Intel(R) X58 Express Chipset/Intel (R) ICH10R
System Configuration:
CPU: Intel I7 950 3,07Ghz (stock)
DDR3 1333 MHz 3 x 2Gb
HDD: 1000GB
Video: Sapphire Radeon 5770 Vapor-x
Audio: Onboard ALC889
Ethernet: Realtek
Peripherals: USB Mouse and Keyboard
Install method:
Retail Install from the Mac App Store
BootLoader : Chamaleon 2.1 RC5
SMBIOS: MacPro 4.1
Boot Flags:
GraphicsEnable=Yes
GeneratePStates=Yes
GenerateCStates=Yes
KernelCache=Yes
EthernetBuiltIn=Yes
AppleHDA(patched)
Legacy889HDA
AppleIntel8256X
Functionality:
Everything works flawless. Video, Audio, Lan , Firewire, Wifi
Shut Down and Restart
works with no Kext.
Sleep and Wake up works with no Kext.
Geekbench: 11.000 aprox.
Cinebench: 6 aprox.
GPU 37 Fps
DsdtAutoPatcher
Patches: DTGP, IRQS, SBUS, SHUTDOWN, LPC ICH10, REMOVED DEVICES, MUTE, AHCI ORANGE ICON, AZAL TO HDEF, HDEF, ALC889
Intel DP67DE B3
Intel(R) P67 Express Chipset
System Configuration:
Install method: From USB "Mountain Lion 10.8.2 [Intel]" rutracker 'dot' org/forum/viewtopic.php?t=4121627
CPU: Intel Core i5- GHz@ 3,90 GHz
Memory: Corsair XMS3 DDR3 1000 MHz (XMP 2000) 2 x 2Gb
SDD: SSD Corsair F60, 60Gb, SATAII
Video: HIS
mb (1080p DVI BenQ G2220HD+1080p HDMI SAMSUNG TV UE40D6500 )
Audio: Onboard ALC892 with VoodooHDA 2.7.3 + Creative Sound Blaster Audigy 2 Value, PCI
Ethernet: Intel 8/1000
Wi-Fi: TP-Link TL-WN882ND (rev.1.0)
Peripherals: USB Mouse, Keyboard, WebCam Logitech, Line6 UX2 external audio
Install method:
Boot from USB and install (GUI format metod)
First start Booting from USB and drop extra folder into SSD "/", install Chameleon
Bootloader:
Chameleon-2.1svn-r.2050
SMBIOS: iMac12,2
BIOS settings :
Sata Mode to AHCI.
Kexts: FakeSMC, IOAHCIBlockStorageInjector, NullCPUPowerManagement (Extra folder), AppleIntelE1000e & IO80211Family9287 for Wi-Fi (S/L/E)
Kernel flags: GraphicsEnabler=Yes).
Sleep/Wake don't work
Intel DG43NB
Intel(R) G43 Express Chipset
System Configuration:
Install method: From USB "Mountain Lion 10.8.2 [Intel]" iATKOS ML2 with Chameleon bootloader 2.1
CPU: Intel Pentium Dual-core EGhz
Memory: 2x1GB DDR3-1333 Kingmax dual channel
HDD 750GB Seagate Barracuda ES Sata-II running on AHCI Mode (SMART off)
Video: Gigabyte GeForce 8400 GS 512 mb ( extended desktop on dual Dell 17 monitors) with QE/CI full funtions
Audio: Onboard ALC888 with VoodooHDA 2.8.3 new patch for ML2 (on offical site iATKOS)
Ethernet: Intel /100/1000 onboard
Peripherals: USB Mouse, PS/2 Keyboard works well
ODD: Asus DVD-RW Sata interface works well + LG DVD-RW PATA interface works well
All USB 2.0 ports works well
Install method:
Load BIOS default, AHCI mode with SMART off, XD enabled, S3, Limit CPU off (if CPU limit is on, the OS will recognize CPU is Core 2 Solo and work only 1 core)
Boot from USB and install, customizer with nvidia geforce driver 10.8.2 and old graphics card support, AHCI Sata driver enabled, AHCI-ATA enabled, USB, Sound, Wired ethernet
Graphics full funtion with app (Final cut, adobe master collection...)
Sleep/Wake work very well
Intel DG31PR
Intel G31 Express
System configuration:
CPU: Intel Core 2 Quad Q6600
GPU: XFX GeForce 8600 GT 540M 512MB
HDA: ALC888
NIC: Realtek RTL8111-GR
MEM: 2x 2 GB Kingston 800MHz DDR2 SDRAM
BIOS Settings:
Load Default settings
Boot Device set to Legacy & Automatic mode off
Enable USB Boot
Installation method:
myHack Install of Retail ML 10.8.0 USB w/extra dsdt & boot.plist and -v flag to get in
OS X 10.8.1-2 update chameleon/extra installation
Shutdown/Reboot
Mac App Store
DVD Player
All USB 1 & 2 ports
Unknown card reader start reading after usb fix in boot.plist
and no extension needed.
Audio back and front green plugs.
Not Working:
Sleep/Wakeup
Patched DSDT for this board from
that is not 0071 and a boot.plist with USBBusFix=Yes is needed for myHack usb extra folder (might need GraphicsEnabler=Yes / EthernetBuiltIn=Yes too)
Chameleon 2.2 Bootloader
Full audio by Elad Nava ALC888 1.7.9 AppleHDA.kext with no HDAEnabler in System/Extra/Extensions
Lnx2Mac RealtekRTL81xx-0_0_90 ethernet installer
Same system from 10.8.0 only from 10.8.3 audio gets lost. also 10.6.8 and only empire efi boot cd + 10.6.0 dvd + voodoo hda lets install only sleep is useless
Hardware Name
Patches Used
32/64bit working with patches
Intel(R) H61(B3)
System configuration:
CPU: Intel(R) Core(TM)
i3-3225 Processor (3.30GHz, 3M Cache)
GPU: Intel HD 4000 (Integrated)
RAM: MicroCenter DDR3 1333MHz 4 GB
LAN: Realtek(R) 8111E
BIOS version: 18.2
Installation method: (Copied from entry for Asus P8H61-M LX3 PLUS R2.0 above, with minor changes to configuration)
Using iAtkos ML2 from a flash drive:
1. Formatted the flash drive (8 GB) to Mac OS X Extended (Journaled) [used Master Boot Record]
2. Dragged the iAtkos ML2 DMG to Disk Utility, mounted it and restored it to the newly created partition of the flash drive.
3. Ran the
and installed it to the flash drive.
4. Set HDD as AHCI instead of IDE in Advanced Setup in the BIOS (UEFI) and enabled VT-x as well
6. Booted from the flash drive.
7. Formatted a partition as Mac OS X Extended (Journaled) in Disk Utility and selected the following customizations:
- Bootloader
- Bootloader options: Kernel Cache, Built-in Ethernet (Note: I disabled Graphics Enabler because it wouldn't go past the Apple loading screen. Feel free to experiment.)
- Patches: FakeSMC, Disabler, EvoReboot, RTC Patch
- Mac model: MacBookPro 9,1
- Drivers:
- SATA/IDE: AHCI SATA, AHCI Internal, Non-AHCI SATA
8. Reboot and you should have everything working.
I have an issue that it takes 3-4 minutes for mouse/keyboard because they are generic USB.
MSI Z77MA-G45
MSI Z77MA-G45 Intel Z77 Socket Motherboard
System configuration:
CPU: Intel Xeon(R) E3 1240v2 Processor (3.40GHz, 8M Cache)
RAM: Corsair DDR3 CL9 1600MHz 16 GB (OSX86 Not picky on brand)
LAN: RTL81xx OS X Driver
WIFI: TL-WDN4800
BIOS version: 1.7
Used this install guide
What Helped Most with Nvidia GTX 660 (Non-Ti) - see below
GraphicsEnabler=No
in Some cases rm NV* to boot. Install the updated drivers
Z68A-GD80-G3
System Configuration
Intel Core i7 - 2500k (4.5GHz Detected at 3.3Ghz)
500 Gb Sata II HD
Installation
iAtkos LM2
1. Formatted the flash drive (8 GB) to Mac OS X Extended (Journaled) [used Master Boot Record]
2. Dragged the iAtkos ML2 DMG to Disk Utility, mounted it and restored it to the newly created partition of the flash drive.
3. Ran the
and installed it to the flash drive.
4. Set HDD as AHCI instead of IDE in Advanced Setup in the BIOS (UEFI) and enabled VT-x as well
5. Booted from the flash drive
6. Used Default Settings from ML2
7. Everything just worked: Sound, GTX 570, Ethernet (Have not tried sleep or USB 3.0)
Much easier install than on 10.7 or 10.6. (I also have a wifi card that works natively)
Intel(R) B75 Chipset
System Configuration
CPU: Intel Pentium G840
RAM: 2x 4 GB DDR3 1333 MHz
Graphic: ASUS NVIDIA Geforce 440GT 1GB
LAN: Realtek(R) 8111E
Audio: Realtek(R) ALC887
HDD: SATA II SAMSUNG Spinpoint F1 HD322HJ 320GB 7200
Drive: SATA II LG GH22NS30
Installation method:
Using Niresh ISO Bootable 10.8
1. Booted from the DVD drive.
2. Formatted a partition as Mac OS X Extended (Journaled) in Disk Utility and selected the following customizations:
Default and Graphics Enabler=on
2. Reboot after installation
3. Install BugFix from Niresh
4. Install Lnx2Mac and DSDT
5. Update to 10.8.2 via AppStore
6. Install kext to ALC887 (Current)
7. Install new NVIDIA frameworks and kexts
8. Install SleepEnabler.kext
9. Repair permissions and cache
Everything working!
Sleep fully working!
Please specify if your card is AGP, Integrated, PCI or PCI-E.
Also, place chip and board manufacturer in their respective column.
Board-Manufacturer
Dual display
32/64bit working
Add dev ID 0x to ATI4600Controller.kext
Add dev ID 0x to ATIRadeonX2000.kext
GraphicsEnabler=Yes ; AtiConfig=F AtiPorts=2
HDMI / DVI or VGA (But NO Sound output via HDMI)
Using QE_CI Exotic patch for HD48xx cards
Chameleon 2.0 RC5 or PCEFI 10.6 Lion + Snow
GraphicsEnabler=Yes
Not tested
Add dev ID 0x68E11002 to AMDRadeonAcellerator.kext under "Cedar" IOPCIMatch
Chimera v1.11.1 r.2 build 12C54
GraphicsEnabler=No
Only DVI tested
Not tested
Add dev IDs 0x68Ee11002 to AMDRadeonAcellerator.kext under "Cedar" IOPCIMatch
Add dev IDs 0x68Ee11002 to ATI5000Controller.kext under IOPCIMatch
Chameleon 2.1 (svn-r2109) [ 21:45:24]
GraphicsEnabler=Yes
AtiConfig=Shrike (Provides Dual for HDMI + DVI)
or use Baboon or Zonalis for dual HDMI + VGA (Elemuer is only valid for single display)
AtiPorts=3
HDMI + DVI
Works OOB (true 5770, not flashed)
Confirmed working in both Lion and Mountain Lion
GraphicsEnabler=Yes/No
DSDT Edits Needed for HDMI Audio
DVI/DVI/DP/VGA+Adapter
Works w/3 displays
Chameleon 2.0 RC5 or PCEFI 10.6 Lion + Snow
GraphicsEnabler=Yes/No
works with both
DVI/HDMI/VGA
Not tested
Using this guide to get rid of the ghost monitor issue
GraphicsEnabler=Yes
since 10.8.2 sleep mode isn't working with this card, if you pick an older kext (10.8.1 or 10.8) it's still working fine
DVI / DisplayPort (HDMI, VGA with adapter not tested)
Radeon HD 6450
XFX/Sapphire/MSI
GraphicsEnabler=Yes
AtiConfig=Pithecia
Works OOB Using
DVI / HDMI / VGA
Radeon HD 6570
MSI/Sapphire
DVI/VGA/HDMI all work
Radeon HD 6570 2GB Memory Bus 128 Bit
Gigabyte GV-R657D3-2GI -
GraphicsEnabler=Yes
AtiConfig=Bulrushes
AtiPorts=3
smbios.plist iMac 11,1 (No lag after wake up from sleep with this)
Sleep works
Chameleon 2.1 (svn-r2181)
Shown as AMD Radeon HD
Series 2048 MB in System Profiler
1xDVI / 1xHDMI / 1xVGA
Chameleon 2.0 RC5 (or the most recent) or PCEFI 10.6 Lion + Snow
GraphicsEnabler =& No more need!!!
DVI / HDMI / VGA
Not tested
Radeon HD 6770 1GB DDR5 silent
Chameleon 2.2 r2189 with GraphicsEnabler=Yes, no ATIports or ATIconfig needed
ATI5000controller.kext, ATI6000controller.kext, AMDRADEONAccelerator.kext edited with device ID - 68BA1002 Beware in ATIXXXXcontroller to edit under AMDJUNIPER....
Edited ApplePowerManagement.kext, but don't know if used, idle GPU temp=43°
macpro4,1 SMBios
Latest FakeSMC (5,0,2,0), display GPU temp with hwmonitor
Sleep OK, OPENGL 36fps cinebench, Unigine 3.0 24 fps med, mercury engine OK in premiere CS6 with tweak
Mac OpenGL better results than in Windows in Unigine 3.0, but DirectX11 faster overall
no firmware flash, very stable, very satisfied for 100e second hand
silent version, no fan
Only Displayport tested, but 4 ports detected
Not tested
Radeon HD 6670 1GB
GraphicsEnabler=Yes
AtiConfig=Pithecia
AtiPorts=3
Everything works using this tutorial
DVI / HDMI / VGA
Radeon HD 6870 1GB
VTX 3D VX6870 1GBD5-M2DHV2
GraphicsEnabler=Yes
AtiConfig=Duckweed
AtiPorts=5
2xDVI / HDMI / 2xminiDP
GraphicsEnabler=No
DSDT Inject needed FB= Futomaki or Aji more info here :
You need sleep working in your system ( you need sleep and awake your system at login screen )
2xDVI / 4xminiDP
2 miniDP to DVI tested and works
Board-Manufacturer
Dual display
32/64bit working
NVIDIA Geforce 8400 GS
Geforce 8400GS 512MB DDR2 ID 0x10c3
Working OOB with current version of Chameleon
GraphicsEnabler = Yes
VGA / DVI / HDMI
VGA +/& DVI
NVIDIA Geforce 8500 GT
Gigabyte Geforce 8500GT 256MB DDR2
Working OOB
GraphicsEnabler = Yes
Not tested
Not tested
NVidia 512MB
Working OOB
GraphicsEnabler = Yes under kernel Flags in com.apple.boot.plist
VGA / DVI (not tested)
Not tested
NVIDIA Geforce 8800 GTS 512MB (G92) GDDR3
ASUS EN8800GTS 512
ZOTAC 8800 GTS 512 MB
Working OOB with original included kext (NVDANV50HAL.kext)
g92enabler.pkg
GraphicsEnabler=Yes
NVIDIA Geforce 9500 GT
Inno3d Geforce 9500 GT 1 GB DDR2
Working OOB
NVEnabler 64.kext and CUDA.kext
VGA / DVI / HDMI
Tested with DVI (VGA to DVI) and HDMI (DVI to HDMI)
nVidia GeForce 9600 GT
ECS Elitegroup nVidia GeForce 9600GT 2GB
Working OOB
DVI / DVI / HDMI (via DVI&HDMI adapter)
Not Tested
Geforce 9600
Zotac Geforce 9800 GT 512 MB
Working OOB
DVI / D-SUB / HDMI
Not tested
Geforce 9800
Leadtek Geforce 9800 GT 512 MB Green Edition
Working OOB
DVI / D-SUB / HDMI
Not tested
Geforce 9800 GT
Gygabyte GV-N98TOC-1GI v2.0
1024 Mb DDR3 256 bit
Working OOB with current version of Chameleon
GraphicsEnabler = Yes
DVI / D-SUB / HDMI / SPDIF
VGA +/& DVI
NVIDIA GF 210 S
CLUB 3D 1024 MB DDR3
DeviceID: 0x0a65
Revision: 0x00a2
ROM: 70.18.82.00.1B
Working OOB
GraphicsEnabler = Yes
VGA / DVI / HDMI
VGA +/& DVI
NVIDIA GeForce 210
ASUS EN210 SILENT/DI/1GD3(LP) 1GB DDR3, fanless
Working OOB
GraphicsEnabler = Yes
Bootflag: PCIRootUID=0
VGA / DVI / HDMI
DVI + HDMI (VGA not tested)
NVIDIA GeForce 210
Zotac Geforce 210 Synergy Edition 1GB DDR3 (ZT-20308-10H), fanless
Working OOB
GraphicsEnabler = Yes
VGA / DVI / HDMI
HDMI only tested
NVIDIA GT 430
PNY GT 430 1024MB DDR3 PCI Express(R) 2.0 Model : VCGGT4301XPB
Working OOB
GraphicsEnabler = Yes
Nvidia Cuda Drivers for Mac From
DVI (Not Tested) / VGA / HDMI
Nvidia GeForce GT 520 1GB
Working OOB
GraphicsEnabler = No/Yes (Both Works!)
Nvidia Cuda Drivers for Mac From
OpenCL works with patch
NVIDIA GTX 550 Ti
EVGA 01G-P3-1556-KR NVIDIA GeForce GTX 550 Ti 1024MB GDDR5
NOT Working OOB
(Can get to run, but system will be very unstable)
GraphicsEnabler = Yes
VGA / DVI / HDMI
VGA +/& DVI
NVIDIA GTX 560 (non TI)
Gigabyte GTX 560 1024 MB GDDR5 Model: GV-N56GOC-1GI
Working OOB
GraphicsEnabler = Yes
10.8.0 OpenCL Enabler Nvidia GTX470 /480 /560TI /570/580
Nvidia Cuda Drivers for Mac From
DVI / DVI / HDMI
Not tested
NVIDIA GTX 570
Worked OOB but installed NVIDIA Retail 304.000.00f20 OpenCL Patch
VGA/DVI/HDMI
NVIDIA GTX 660
Inno3D GTX 660 2048 MB GDDR5
If you want to use GTX 660 Display card,install display driver ""
GraphicsEnabler = No
Nvidia Cuda Drivers for Mac From
DVI / DVI / HDMI
Not tested
NVIDIA GTX 560 (non TI)
Zotac GTX 560 1024 MB GDDR5 Model: ZT-50701-10M
Working OOB
GraphicsEnabler = Yes
Nvidia Cuda Drivers for Mac From
DVI / DVI / HDMI / VGA (DVI To VGA Adapter) / VGA (DVI To VGA Adapter) / Display Port (Not Tested)
NVIDIA GTX 560 (TI)
MSI GTX 560ti 1024 MB GDDR5 Model: N560GTX-Ti Twin Frozr II/OC
Working OOB
GraphicsEnabler = Yes
Nvidia Cuda Drivers for Mac From
VGA (DVI To VGA Adapter) / Display Port (Not Tested)
NVIDIA GTX 560 (TI)
EVGA GTX 560ti 1024 MB GDDR5 Model: 01G-P3-1563-KR
NOT Working OOB. Use integrated gfx and edit your boot.plist with:
GraphicsEnabler=Yes
Setup predefined resolution:
Recognized after setup and works. All 3 ports
Setup Using Vanilla 10.8.2 Retail
Update/Combo Update Unknown
DVI/DVI2/HDMI Tested
NVIDIA GTX 680
GTX 680 2048 MB GDDR5
Working OOB
GraphicsEnabler = No
Nvidia Cuda Drivers for Mac From
DVI / DVI / HDMI/DP
Not tested
NVIDIA GeForce GT 640M
OEM 640m 2048gb GDDR5
Working OOB
DVI / HDMI
NVIDIA GTX 660 (Non Ti)
EVGA NVIDIA GeForce GTX 660 2048MB GDDR5
Working OOB
GraphicsEnabler = No
Nvidia Drivers for Mac
VGA / DVI / HDMI
NVIDIA GTX 660 (Non Ti)
MSI GeForce GTX 660 TwinFrozr III 2GB GDDR5 OC Edition
Working OOB
GraphicsEnabler = No
Nvidia Drivers for Mac
VGA / DVI / HDMI
NVIDIA GeForce GTX 650
Gigabyte GV-N650OC-1GB GDDR5
Working OOB
GraphicsEnabler = No
Nvidia CUDA Drivers for Mac (working good on native ML driver too)
2xDVI / HDMI / D-Sub
Not tested
NVIDIA GeForce GTX 660Ti
MSI 2GB DDR5 Power Edition
Working OOB
GraphicsEnabler = No
2xDVI / 2xHDMI
NVIDIA GeForce 285
EVGA Geforce GTX 285 SSC 1GB DDR3
Required flags for the installation process and first boot
PCIRootUID=0
npci=x3000
darkwake=0
GraphicsEnabler=Yes
Not tested
ASUS GeForce GT 610 1GB DDR3
Working OOB
GraphicsEnabler=No
HDMI /DVI / D-SUB
NVIDIA GeForce GT 620 1GB DDR3
Required flags at first boot
In safe mode install NVIDIA GeForce and Quadro kexts
HDMI /DVI / D-SUB
NVIDIA Geforce 630GT
EVGA Geforce 630GT 2GB DDR3
Working OOB
GraphicsEnabler=Yes PCRootUID=1
VGA / DVI / HDMI
VGA +/& DVI
NVIDIA Geforce GTX 560 TI
Gainward GTX 560 Ti Phantom (1GB)
NOT Working OOB
GraphicsEnabler=No (Otherwise restart-loop)
Install NATIT (FullHD 2 Dualscreen etc..., detects 2GB)
VGA / DVI / HDMI
VGA + HDMI
Board-Manufacturer
Dual display
Compatible 64bit
Not working
Not tested
GMA X3100 working in 64.bit mode , GraphicsEnabler = No, no mouse lag.
download kext from
Working with Chimera 1.11.1 bootloader only when using dual display , before booting unplug hdmi cable or else it doesnt work.
DVI / HDMI
Yes - DVI/HDMI
Manufacturer
32/64bit working with patch
802.11 n/g/b
300 Mbps, Mini
802.11 n/g/b
Netgear WNA Mbps, Mini
RTL8188CUS
802.11 n/g/b
Hama WLAN-USB-Stick 150 Mbps, Mini
802.11 n/g/b
802.11 n/g/b
MSI US300EX Lite USB Adapter WLAN 802.11.n Ralink USB 2.1
Download driver
802.11 n/g/b
D-Link DWA-125 N150
Download driver
- perfect signal
802.11 b/g/n
ALFA AWUS036NEH
ALFA Network
Download driver
PCI Express
802.11 b/g/n
PCI Express Wireless Ethernet
D-LINK DWA-556
Working OOB
PCI Express
802.11 b/g/n
PCI Express Wireless Ethernet
D-LINK DWA-547
Working OOB
802.11 b/g/n
Workiing with OEM
802.11 b/g/n
Workiing with OEM
PCI Express
802.11 a/b/g/n
PCI Express Wireless Ethernet
Atheros 9380
Working OOB. Seen like a real AirPort Extreme
PCI Express
802.11 b/g/n
Atheros 9285
Requires patched IO80211Family.kext
PCI Express
802.11 a/b/g/n
PCI Express Wireless Ethernet
Rosewill N900PCE
Atheros 9380
Working OOB. Seen like a real AirPort Extreme
PCI Express
802.11 a/b/g/n
PCI Express Wireless Ethernet
Netgear WN311B
Broadcom BCM4321
Working like a real WiFi AirPort
802.11 b/g/n
Working OOB. Seen as Airport Extreme
802.11 b/g
Dell DW1390
Broadcom-based
Working OOB. Seen as 3rd party card.
802.11 a/b/g
Dell DW1490
Broadcom-based
Working OOB. Seen as 3rd party card.
802.11 b/g
Dell DW1395
Broadcom-based
Working with patched BCM43xxxFamily kext. Seen as 3rd party card.
1/2 mini PCIe
802.11 b/g
Dell DW1397
Broadcom-based
Working with patched BCM43xxxFamily kext. Seen as 3rd party card.
8021.11a/b/g/n
Ralink RT3572
PCI device:0x3572 vendor id:0x148f. Use driver for Ralink USB 3x7x provided at . Use Ralink wireless utility to configure. Seen as "802.11n WLAN" USB device, not as Airport device.
Manufacturer
32/64bit working with patch
PCI Express
10/100/1000 Mbps RJ-45 Gigabit Ethernet
Gigabit Ethernet Card
Planet ENW-9700
Marvell 88E8053
Working OOB
Integrated
Gigabit Ethernet
Gigabit Ethernet Card
Integrated
Gigabit Ethernet
Intel 82566DC
Works with
PCI Express
Dual Port Gigabit Ethernet
Gigabit Ethernet Card
Intel 82571EB
Working OOB incl. WOL, WOD.
Hardware Name
Manufacturer
32/64bit working with patch
Working OOB
Integrated
Working with .
Integrated
Works with
Aureon Dual USB
Genuine PnP works OOB
Behringer UCA-202
OOB in each OS-X from 10.6.x to current
USB wireless headset
HS-1200 Digital Wireless
Genuine PnP works OOB
USB speaker set
M1 Active 520 USB near-field monitor speakers
Genuine PnP works OOB
Genuine PnP works OOB
DELOCK USB 7.1
Genuine PnP works OOB
Audigy2 ZS Platinum
Works with the . Also more stable if in bios enabled 'old oprom for pci'
Scarlet 2i4
Works OOB with ASUS P5B mobo. If you experience any errors try class compliant mode (script downloadable from Focusrite website)
Item Description
Manufacturer
32/64bit working
HP Webcam HD-3110
Hewlett Packard
Working OOB.
HP Webcam HD-4310
Hewlett Packard
Working OOB.
Hercules HD Twist
Guillemot Corporation
Working OOB.
SPC 1330 NC
Genuine PnP works OOB.
Microsoft Lifecam Studio
Working OOB.
A4tech all new models in 16mpix
works OOB.
Logitech HD C910
Works OOB.
Logitech B500
Works OOB.
Logitech C210
Working OOB.
Logitech C270 HD
Working OOB.
Type of Accessory
Item Description
Manufacturer
32/64bit working
Bluetooth USB V2.0
V 2.0 CBTU2A
Conceptronic
Tested with Wireless Apple keyboard, Apple Magic Mouse and a bluteooth headset
Bluetooth USB Adapter
Nano Bluetooth USB Adapter, version 2.1+EDR class2,
OOB. Tested with Apple Magic Mouse
Bluetooth USB Adapter
Belkin F8T016 Mini Bluetooth Adapter
Working OOB. Tested with Apple Magic Mouse
Bluetooth USB Adapter
Bluetooth 2.1 USB Micro Adapter
Working OOB. Tested with Apple Magic Trackpad
Bluetooth USB Adapter
Tested with Wireless Apple keyboard, Apple Magic Mouse. Sleep/Wake don't work.
Bluetooth USB V2.0
BTD-MINI2 v.2.1, Class I
Tested with Wireless Apple keyboard, Apple Magic Mouse. Sleep/Wake work good, but not from mouse/keyboard.
Bluetooth USB V2.0
BT211 Bluetooth v2.1 + EDR
Don't work.
Bluetooth USB 1.1
DBT-120 Rev. B4 v.1.1, Class I
Working OOB. Tested with Mighty Mouse. Sleep/Wake works perfect. Says Manufacturer: Cambridge Silicon Radio.
Bluetooth USB V2.0
Adapter USB 2.0 to Bluetooth V2.1 EDR Nano, Class 2 Chipset CSR -
LogiLink(R)
Working OOB.
Bluetooth USB V2.0
Wireless Apple keyboard every time lost connection, print with very high delays, Apple Magic Mouse often lost connection, but work more stable than keyboard. Work is not stable.
Bluetooth USB adapter
Btoes 2.0 XMicro
Works out of the box. File transfer with Android phone and notebook computer works flawlessly. I have not tested keyboard or mouse.
Type of Accessory
Item Description
Manufacturer
32/64bit working
PCIe 1x 4 port USB 3.0
4 Port PCI Express Card with SATA Power connector
USB Super-Speed Bus
Working with MacPro3,1 (real Mac)
Using LaCie modded KEXT (PHXCD.kext) Version 1.0.10
Card uses TI-7340 chipset
This page was last modified on 5 July 2015, at 12:40.
This page has been accessed 607,523 times.
& 2015 OSx86 Project&&|&&