2348人阅读
ARM/单片机（7）
当然 这个是没有做到硬解码的，硬解码的效果很棒，但还没摸索清楚，可以去看看友善之臂做的那个带硬解码效果的，很棒~
Mplayer版本：MPlayer-1.0rc2
交叉编译器：Arm-linux-gcc
Libmad库：libmad-0.15.1b.tar.gz &点击进入&
流媒体库：live555-latest.tar.gz & & &
1.&&&& 解压libmad-0.15.1b.tar.gz，进入目录，输入配置命令：
&& ./configure --enable-fpm=arm
--host=arm-linux --disable-shared --disable-debugging --prefix=/usr/local/arm/4.4.1/lib
CC="arm-linux-gcc"
之后可在/usr/local/arm/4.4.1/lib 目录下找到生成的include和lib目录，这些就是libmad相关的库
2. 交叉编译live555.(先删掉支持mplayer在PC上/usr/local/lib/live)
tar zxvf live555-latest.tar.gz
vim config.armlinux
CROSS_COMPILE=arm-linux-
LINK = $(CROSS_COMPILE)g++ -o
LIBRARY_LINK =$(CROSS_COMPILE)ld &o
LIBRARY_LINK_OPTS =$(LINK_OPTS) &r &Bstatic
保存后退出
./genMakefiles armlinux
然后将该live文件夹复制到/usr/local/lib/下
3交叉编译Mplayer1.0rc2
将MPlayer-1.0rc2.tar.bz2解压至/usr/src/目录下，将目录下的libdvdcss/ioctl.c文件中的所有#error "DVD ioctls are unavailable on
this system"注释掉，否则后面的编译会出错。
进入解压后的目录，在终端中输入以下命令：
./configure --target=arm-linux --cc=arm-linux-gcc --enable-fbdev
--disable-win32dll --disable-dvdread --enable-network --enable-menu --disable-ftp
--disable-alsa --enable-ossaudio --disable-tv --disable-x11
--enable-cross-compile --target=arm-linux --host-cc=gcc --disable-armv5te
--disable-armv6 --language=en --enable-debug --disable-mp3lib
--enable-libavcodec_a --enable-fbdev --disable-mencoder --enable-mad
--with-extraincdir=/usr/local/arm/4.4.1/arm-none-linux-gnueabi/libc/usr/include/:/usr/local/arm/4.4.1/lib/include
--with-extralibdir=/usr/local/arm/4.4.1/arm-none-linux-gnueabi/libc/armv4t/usr/lib:/usr/local/arm/4.4.1/lib/lib& --enable-libavcodec_mpegaudio_hp
--enable-static --disable-ivtv
Make；搞掂~
PS：如果make的过程中出现-fforce之类的参数错误，可以直接修改makefile 去掉该参数。
* 以上用户言论只代表其个人观点，不代表CSDN网站的观点或立场
访问：138715次
积分：1839
积分：1839
排名：第13099名
原创：42篇
转载：29篇
评论：34条
(1)(2)(2)(1)(4)(5)(2)(4)(4)(41)(5)嵌入式系统设计（16）
Mplayer移植到ARM11(v6)步骤：
1.&&&&&&下载源代码MPlayer-1.0rc1.tar.bz2
2.&&&&&&下载下载libmad包（libmad-0.15.1b.tar.gz）；
打开一个终端，进入libmad的目录，输入配置命令：
./configure --enable-fpm=arm --host=arm-linux --disable-shared（这个选项就是说明要静态编译） --disable-debugging--prefix=/mp3/install
CC=arm-linux-gcc（要保证arm-linux-gcc的路径已经有 export过，否则给出完整路径。）
make install
这样就可以看到 /mp3 /install目录下多了include和lib目录，这些就是libmad相关的库。
3.&&&&&&解压得到源代码，进入源代码，敲入命令./configure –host-cc=gcc –cc=arm-linux-gcc –target=arm-armv6-linux –enable-static–prefix=/usr/local/software/mplayer –disable-win32waveout –disable-dvdread –enable-fbdev–disable-mencoder –disable-live –disable-mp3lib –enable-mad
–enable-libavcodec –disable-ivtv
4.&&&&&&&进入配置文件config.mak.找到EXTRA_INC = &-I/usr/include&,把这个-I/usr/include 删除。不然会报这个错mathinline.h:530:error:impossibleconstraint in 'asm'。把MAD_LIB = 后面的路径改为-lmad –L/mp3/install/lib
5.&&&&&&进入文件libavcodec/armv4l/dsputil_arm_s.S，在代码开始处加入一下代码：
#ifndef HAVE_PLD
.macro pld reg
不然会报这个错armv41/dsputil_arm_s.S:79:error:selected processor does not support'pld [r1
6.&&&&&&然后make得mplayer执行文件
一切搞定，结果我想连接网络电台播放音乐，发现连接不了，发现我在编译的时候—diable-live,不支持流媒体协议，没仔细看配置。结果就犯政治错误了。重新来把—disabe-live去掉。下载LIVE555版本，我下载的是live..tar.gz，进入文件config.armlinux，修改CROSS_COMPILE?=arm-linux-其他的不变。然后./genMakefile armlinux，make，拷贝live到/usr/lib目录下。当在编译Mplay时就可以检测了live555了。最后就是不同的MPlayer版本可以要修改的地方不太一样。不过大体的步骤相似
* 以上用户言论只代表其个人观点，不代表CSDN网站的观点或立场
访问：26449次
排名：千里之外
原创：23篇
转载：27篇
(1)(1)(1)(1)(2)(2)(1)(6)(8)(8)(19)主题 : 交叉编译 MPlayer-1.0rc3 配置文件
集体的力量是伟大的
级别: 侠客
金钱: 755 两
威望: 307 点
贡献值: 0 点
综合积分: 192 分
&交叉编译 MPlayer-1.0rc3 配置文件
图片： =700) window.open('http://www.arm9home.net/attachment/59_0be52d61c.png');" onload="if(this.width>'700')this.width='700';" >
./configure \--host-cc=gcc \--cc=arm-linux-gnueabi-gcc \--target=arm \--enable-static \--disable-win32dll \--disable-dvdread \--disable-dvdread-internal \--disable-dvdnav \--disable-libdvdcss-internal \\--disable-largefiles \--disable-apple-remote \--disable-apple-ir \\--disable-tv \--disable-tv-v4l1 \--disable-tv-v4l2 \--disable-tv-bsdbt848 \--disable-tv-teletext \\--disable-unrarexec \\--disable-macosx \--disable-maemo \--disable-macosx-finder \\--disable-macosx-bundle \--disable-inet6&&&&&& \--disable-gethostbyname2&&\--disable-ftp&&&&&&&&&&\--disable-vstream&&&&&&\--disable-pthreads&&&& \--disable-w32threads&& \--disable-ass&&&&&&&&&&\--enable-rpath&&&&&&&& \\--enable-fbdev \--disable-mencoder \--disable-live \--enable-mad \--enable-libavcodec_a 结果&&李孝利的MV
/ 远程开关 GPS GPRS DTU 华为 西门子 希姆通 WAVECOM&&毕设代做。
级别: 圣骑士
金钱: 1945 两
威望: 389 点
贡献值: 0 点
综合积分: 776 分
移植MplayerMplayer在Linux上安裝起來很方便，簡單的 configure，make一下，就裝好了，和QT的GUI配合，界面還是蠻友好的。Mplayer對媒體格式的廣泛支持，以及豐富的後期處理濾鏡，最新的版本更支持DIVX,H.264，MPEG4等最新的流媒體格式，可以實時在線播放視頻流，MPlayer大部分解碼庫都自帶了,如ffmpeg,但是自帶的音頻庫效果不好.換成使用libmad效果不錯.因此MPlayer在ARM-Linux的最簡單的移植只需要移植這兩個即可.移植後即進行字符界面的播放。如果需要字幕支持.需要移植freetype庫.支持JPG皮膚需要 libjpeg庫,打開DVD光盤格式,需要dvdread,dvdnav等,支持pnm庫需要libpnm MPlayer的面版主要採用X11支持.但移植X11需要大量工作，一般將其關掉。ARM版同樣可以加入live555支持,支持遠程的RTSP的流媒體播放器,方法同X86版類似。一、開發環境編譯系統：Linux12/kernel 2.6.32.24開發板：Mini6410（nand 1024M,SDRAM 64M）交叉編譯工具：arm-linux-gcc-4.5.1實現mplayer，要從三方面著手：1.編譯Kernel支持ALSA2.編譯安裝libmad3.User Mode支持./mplayer配置命令二、移植Mplayer1.移植準備  a. 下載 libid3tag源代碼 (使用libid3tag -0.15.1b)&&b. 下載 libmad源代碼 (使用libmad-0.15.1b)&&c. 下載 Mplayer源代碼(使用Mplayer 1.0rc3)2.編譯libid3tag&&a. 配置.configure&& #./configure --host=arm-linux --disable-shared --prefix=/usr/local/arm/4.5.1/lib CC=&arm-linux-gcc&&&\&&&&&&--disable-shared –enable-static \&&&&&&CPPFLAGS=&-I/usr/local/arm/4.5.1/lib/include& \&&&&&&LDFLAGS=&-L/usr/local/arm/4.5.1/lib/lib& &&b.編譯並安裝libid3tag&&&&&&&&#&&make CC=arm-linux-gcc&&&&&&&&#&&make CC=arm-linux-gcc install這一步的目的是在/usr/local/arm/4.5.1/lib下生成lib目錄，在lib目錄下生成include和lib兩個檔夾，對應檔夾中生成id3tag.h和libid3tag.a檔，這兩個檔供mplayer編譯用。3.編譯libmad  a. 配置.configure   #./configure --enable-fpm=arm --host=arm-linux --disable-shared --prefix=/usr/local/arm/4.5.1/lib CC=&arm-linux-gcc&   b. 編輯Makefile：將-fforce-men參數移除       (原因是gcc 4.4 或者更高版本，已經將其去除了，所以會出現上面的錯誤！)   c. 編譯並安裝libmad   #  make CC=arm-linux-gcc   #  make CC=arm-linux-gcc install如果不先配置安裝libmad，則在make mplayer時出現找不到mad.h 錯誤，這一步的目的是在/usr/local/arm/4.5.1/lib下生成lib目錄，在lib目錄下生成include和lib兩個檔夾，對應檔夾中生成mad.h和libmad.a檔，這兩個檔供mplayer編譯用。?4.編譯Mplayera. 配置.configure# ./configure --host-cc=gcc --cc=arm-linux-gcc --target=arm --enable-static --disable-win32dll --disable-dvdread --disable-dvdread-internal --disable-dvdnav --disable-libdvdcss-internal --enable-fbdev --disable-mencoder --disable-live --disable-mp3lib --disable-mad --enable-libavcodec_a --language=zh_CN --disable-live 2&&1 | tee logfileb. 編譯#  make CC=arm-linux-gcc測試./mplayer *.mp3./mplayer *.avi./mplayer *.rmvb[ 此帖被kazaya在 15:50重新编辑 ]
级别: 论坛版主
发帖: 5438
金钱: 40120 两
威望: 17929 点
贡献值: 71 点
综合积分: 11116 分
&If you have an apple and I have an apple and we exchange apples, then you and I willstill each have one apple. But if you have an idea and I have an idea and we exchangethese ideas, then each of us will have two ideas.&
级别: 新手上路
金钱: 85 两
威望: 17 点
贡献值: 0 点
综合积分: 34 分
rc3不知道如何提供libmad编译出来的mad.h和libmad.a的路径......
级别: 新手上路
金钱: 230 两
威望: 46 点
贡献值: 0 点
综合积分: 92 分
这其中的第一句：1.編譯Kernel支持ALSA如何实现呢？我现在编译，make的时候，出现libasound.a中找不到clock_gettime上网搜索发现和alsa有关系。这个问题该如何解决呢？谢谢。板子是210
级别: 论坛版主
发帖: 5438
金钱: 40120 两
威望: 17929 点
贡献值: 71 点
综合积分: 11116 分
这其中的第一句：1.編譯Kernel支持ALSA如何实现呢？这里指的是内核镜像里需要包含ALSA架构的音频驱动。如果你用的是光盘上的内核源代码，里面应该已经包含了。我现在编译，make的时候，出现libasound.a中找不到clock_gettime能否把你的步骤和完整的编译信息传上来？
&If you have an apple and I have an apple and we exchange apples, then you and I willstill each have one apple. But if you have an idea and I have an idea and we exchangethese ideas, then each of us will have two ideas.&
级别: 新手上路
金钱: 230 两
威望: 46 点
贡献值: 0 点
综合积分: 92 分
&回 5楼(kasim) 的帖子
晚点我会回复这些代码的。现在的问题是在fedora下面交叉编译的时候出现这些问题。
级别: 新手上路
金钱: 230 两
威望: 46 点
贡献值: 0 点
综合积分: 92 分
&回 5楼(kasim) 的帖子
具体内容请看附件。libmad已经make成功了，按照二楼的方法。说明一下，因为参考了网络上的其他编译方法，所以我这里用的是mplayer 1.0rc2，用rc3，其实也是这个结果，因为测试过的。此外，在libmpeg2的中的motion_comp_arm_s.S文件开头，加入了如下内容：#ifndef HAVE_PLD.macro pld reg.endm#endif@ motion_comp_arm_s.S实际上，加与不加，编译结果都是一样的。make的log在附件中。./configure的时候，输出文件如下：Detected operating system: LinuxDetected host architecture: armChecking for arm-linux-gcc version ... 4.5.1, ok Checking for host cc ... gcc Checking for cross compilation ... ./configure: line 1501: /tmp/mplayer-conf-: cannot execute binary fileyes Checking for assembler support of -pipe option ... yes Checking for compiler support of named assembler arguments ... yes Checking for .align is a power of two ... yes Checking for ARMv5TE (Enhanced DSP Extensions) ... yes Checking for ARMv6 (SIMD instructions) ... yes Checking for iWMMXt (Intel XScale SIMD instructions) ... no Checking for -lposix ... no Checking for -lm ... yes Checking for langinfo ... yes Checking for language ... using en (man pages: en ) Checking for enable sighandler ... yes Checking for runtime cpudetection ... no Checking for restrict keyword ... __restrict Checking for __builtin_expect ... yes Checking for kstat ... no Checking for posix4 ... no Checking for lrintf ... yes Checking for mkstemp ... yes Checking for nanosleep ... yes Checking for socklib ... yes Checking for inet_pton() ... yes (using )Checking for network ... yes Checking for inttypes.h (required) ... yes Checking for int_fastXY_t in inttypes.h ... yes Checking for word size ... ./configure: line 2946: /tmp/mplayer-conf-: cannot execute binary file Checking for malloc.h ... yes Checking for memalign() ... yes Checking for alloca.h ... yes Checking for mman.h ... yes Checking for dynamic loader ... yes Checking for dynamic a/v plugins support ... no Checking for pthread ... yes (using -lpthread)Checking for w32threads ... no (using pthread instead)Checking for rpath ... no Checking for iconv ... yes Checking for soundcard.h ... yes (sys/soundcard.h)Checking for sys/dvdio.h ... no Checking for sys/cdio.h ... no Checking for linux/cdrom.h ... yes Checking for dvd.h ... no Checking for termcap ... yes (using -lncurses)Checking for termios ... yes (sys/termios.h)Checking for shm ... yes Checking for strsep() ... yes Checking for vsscanf() ... yes Checking for swab() ... yes Checking for POSIX select() ... yes Checking for gettimeofday() ... yes Checking for glob() ... yes Checking for setenv() ... yes Checking for sys/sysinfo.h ... yes Checking for pkg-config ... yes Checking for Samba support (libsmbclient) ... no Checking for tdfxfb ... no Checking for s3fb ... no Checking for tdfxvid ... no Checking for xvr100 ... no Checking for tga ... yes Checking for md5sum support ... yes Checking for bl ... no Checking for DirectFB ... no Checking for X11 headers presence ... yes Checking for X11 ... no (check if the dev(el) packages are installed)Checking for DPMS ... no Checking for Xv ... no Checking for XvMC ... no Checking for Xinerama ... no Checking for Xxf86vm ... no Checking for XF86keysym ... no Checking for DGA ... no Checking for 3dfx ... no Checking for OpenGL ... no Checking for VIDIX ... no Checking for /dev/mga_vid ... no Checking for xmga ... no Checking for GGI ... no Checking for GGI extension: libggiwmh ... no Checking for AA ... no Checking for CACA ... no Checking for SVGAlib ... no Checking for FBDev ... yes Checking for DVB ... no Checking for DVB HEAD ... yes Checking for zr ... no Checking for PNG support ... yes Checking for JPEG support ... yes Checking for PNM support ... yes Checking for GIF support ... no Checking for VESA support ... no Checking for SDL ... no Checking for NAS ... no Checking for DXR2 ... no Checking for DXR3/H+ ... no Checking for IVTV TV-Out ... no Checking for V4L2 MPEG Decoder ... yes Checking for OSS Audio ... yes Checking for aRts ... no Checking for EsounD ... no Checking for Polyp ... no Checking for JACK ... no Checking for OpenAL ... no Checking for ALSA audio ... yes (using alsa 1.0.x and alsa/asoundlib.h)Checking for Sun audio ... no Checking for VCD support ... yes Checking for dvdread ... no Checking for internal libdvdcss ... no Checking for cdparanoia ... no Checking for libcdio ... no Checking for bitmap font support ... yes Checking for freetype &= 2.0.9 ... no Checking for fontconfig ... no (freetype support needed)Checking for SSA/ASS support ... no (FreeType support needed)Checking for fribidi with charsets ... no Checking for ENCA ... no Checking for zlib ... yes Checking for RTC ... yes Checking for liblzo2 support ... no Checking for mad support ... yes Checking for Twolame ... no Checking for Toolame ... no Checking for OggVorbis support ... yes (internal Tremor)Checking for libspeex (version &= 1.1 required) ... no Checking for OggTheora support ... no Checking for internal mp3lib support ... no Checking for internal liba52 support ... yes Checking for libdca support ... no Checking for internal libmpeg2 support ... yes Checking for libmpcdec (musepack, version &= 1.2.1 required) ... no Checking for FAAC (AAC encoder) support ... no (in libavcodec: ) Checking for FAAD2 (AAC) support ... yes (internal floating-point)Checking for LADSPA plugin support ... no Checking for Win32 codecs ... no Checking for XAnim codecs ... yes (using /usr/local/arm/4.5.1/lib/codecs)Checking for RealPlayer codecs ... yes (using /usr/local/arm/4.5.1/lib/codecs)Checking for QuickTime codecs ... auto Checking for Nemesi Streaming Media libraries ... no Checking for LIVE555 Streaming Media libraries ... no Checking for FFmpeg libavutil ... yes (static)Checking for FFmpeg libavcodec ... yes (libavcodec.so is discouraged over static libavcodec)Checking for FFmpeg libavformat ... yes (static)Checking for FFmpeg libpostproc ... yes (static)Checking for libamr narrowband ... no Checking for libamr wideband ... no Checking for libdv-0.9.5+ ... no Checking for XviD ... no Checking for x264 ... no (in libavcodec: no) Checking for libnut ... no Checking for mencoder ... no Checking for fastmemcpy ... yes Checking for UniquE RAR File Library ... yes Checking for TV interface ... yes Checking for Video 4 Linux TV interface ... yes Checking for Video 4 Linux 2 TV interface ... yes Checking for TV teletext interface ... no Checking for Radio interface ... no Checking for Capture for Radio interface ... no Checking for Video 4 Linux 2 Radio interface ... no Checking for Video 4 Linux Radio interface ... no Checking for Video 4 Linux 2 MPEG PVR interface ... yes Checking for audio select() ... yes Checking for ftp ... yes Checking for vstream client ... no Checking for byte order ... little-endian Checking for OSD menu ... no Checking for Subtitles sorting ... yes Checking for XMMS inputplugin support ... no Checking for inet6 ... yes Checking for gethostbyname2 ... yes Checking for GUI ... noChecking for automatic gdb attach ... no Checking for compiler support for noexecstack ... yes Checking for joystick ... no Checking for lirc ... no Checking for lircc ... no Checking for maemo (Nokia 770) ... no Checking for color console output ... no Checking for DVD support (libdvdnav) ... no Creating config.makCreating config.hConfig files successfully generated by ./configure --host-cc=gcc --cc=arm-linux-gcc --target=arm-linux --enable-static --disable-win32dll --disable-dvdread --disable-dvdread-internal --disable-dvdnav --disable-libdvdcss-internal --enable-fbdev --disable-mencoder --disable-live --disable-mp3lib --enable-mad --enable-libavcodec_a --disable-live --disable-ivtv --prefix=/usr/local/arm/4.5.1 !&&Install prefix: /usr/local/arm/4.5.1&&Data directory: /usr/local/arm/4.5.1/share/mplayer&&Config direct.: /usr/local/arm/4.5.1/etc/mplayer&&Byte order: little-endian&&Optimizing for: &&Languages:&&&&Messages/GUI: en&&&&Manual pages: en&&&&Enabled optional drivers:&&&&Input: ftp pvr tv-v4l2 tv-v4l tv vcd dvb network &&&&Codecs: libavcodec real xanim faad2 libmpeg2 liba52 tremor(internal) libmad &&&&Audio output: alsa oss v4l2 mpegpes(dvb) &&&&Video output: v4l2 pnm jpeg png mpegpes(dvb) fbdev md5sum tga &&&&Audio filters: &&Disabled optional drivers:&&&&Input: dvdnav vstream radio tv-teletext live555 nemesi cddb cdda libdvdcss(internal) dvdread smb &&&&Codecs: x264 xvid libdv libamr_wb libamr_nb qtx win32 faac musepack libdca mp3lib libtheora speex toolame twolame liblzo gif &&&&Audio output: sun openal jack polyp esd arts ivtv dxr2 nas sdl &&&&Video output: ivtv dxr3 dxr2 sdl vesa gif89a zr zr2 svga caca aa ggi xmga mga xvidix winvidix cvidix opengl 3dfx dga xvmc xv x11 dfbmga directfb bl xvr100 tdfx_vid s3fb tdfxfb &&&&Audio filters: ladspa 'config.h' and 'config.mak' contain your configuration options.Note: If you alter theses files (for instance CFLAGS) MPlayer may no longer&&&&&&compile *** DO NOT REPORT BUGS if you tweak these files ***'make' will now compile MPlayer and 'make install' will install it.Note: On non-Linux systems you might need to use 'gmake' instead of 'make'.NOTE: Win32 codec DLLs are not supported on your CPU (arm) or youroperating system (Linux). You may encounter a few files that cannotbe played due to missing open source video/audio codec support.Check configure.log if you wonder why an autodetection failed (make suredevelopment headers/packages are installed).NOTE: The --enable-* parameters unconditionally force options on, completelyskipping autodetection. This behavior is unlike what you may be used to fromautoconf-based configure scripts that can decide to override you. This greaterlevel of control comes at a price. You may have to provide the correct compilerand linker flags yourself.If you used one of these options (except --enable-gui and similar ones thatturn on internal features) and experience a compilation or linking failure,make sure you have passed the necessary compiler/linker flags to configure.If you suspect a bug, please read DOCS/HTML/en/bugreports.html.
(20 K) 下载次数:4
级别: 论坛版主
发帖: 5438
金钱: 40120 两
威望: 17929 点
贡献值: 71 点
综合积分: 11116 分
&回 7楼(mukguchina) 的帖子
从命令&readelf -s /opt/FriendlyARM/toolschain/4.5.1/arm-none-linux-gnueabi/lib/librt-2.11.so |grep clock_gettime&的输出来看，clock_gettime()应该是包含在librt-2.11.so里的：&&&&75: && 112 FUNC&&&&GLOBAL DEFAULT&& 12 clock_gettime@@GLIBC_2.4&& 153: &&&& 0 FILE&&&&LOCAL&&DEFAULT&&ABS clock_gettime.c&& 340: && 112 FUNC&&&&LOCAL&&HIDDEN&&&&12 __GI_clock_gettime&& 364: && 112 FUNC&&&&GLOBAL DEFAULT&& 12 clock_gettime你可以在命令行上手动执行arm-linux-gcc -o mplayer mplayer.o m_property.o mp_fifo.o mp_msg.o mixer.o parser-mpcmd.o subopt-helper.o command.o asxparser.o codec-cfg.o cpudetect.o edl.o find_sub.o get_path.o m_config.o m_option.o m_struct.o mpcommon.o parser-cfg.o playtree.o playtreeparser.o spudec.o sub_cc.o subreader.o vobsub.o unrarlib.o libvo/libvo.a libao2/libao2.a input/libinput.a libmpcodecs/libmpcodecs.a libaf/libaf.a libmpdemux/libmpdemux.a stream/stream.a libswscale/libswscale.a libvo/libosd.a libavformat/libavformat.a libavcodec/libavcodec.a libavutil/libavutil.a libpostproc/libpostproc.a liba52/liba52.a libmpeg2/libmpeg2.a libfaad2/libfaad2.a tremor/libvorbisidec.a osdep/libosdep.a&&-Wl,-z,noexecstack&&&&-lncurses -lpng -lz -ljpeg -lasound -ldl -lpthread -lz -lmad -lpthread -ldl -lrt -rdynamic -static -lm来验证加上&-lrt&是否能解决问题
&If you have an apple and I have an apple and we exchange apples, then you and I willstill each have one apple. But if you have an idea and I have an idea and we exchangethese ideas, then each of us will have two ideas.&
级别: 新手上路
金钱: 230 两
威望: 46 点
贡献值: 0 点
综合积分: 92 分
&回 8楼(kasim) 的帖子
貌似有了。现在有事。等会儿卡看。按照你给的指令，输出如下：/opt/FriendlyARM/toolschain/4.5.1/arm-none-linux-gnueabi/sys-root/usr/lib/libasound.a(pcm_multi.o): In function `snd_pcm_multi_hwsync':pcm_multi.c:(.text+0x1274): warning: Warning: snd_pcm_hwsync() is deprecated, consider to use snd_pcm_avail()libmpcodecs/libmpcodecs.a(ad_realaud.o): In function `preinit':ad_realaud.c:(.text+0x1f8): warning: Using 'dlopen' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking/opt/FriendlyARM/toolschain/4.5.1/arm-none-linux-gnueabi/sys-root/usr/lib/libasound.a(pcm_direct.o): In function `snd1_pcm_direct_parse_open_conf':pcm_direct.c:(.text+0x5138): warning: Using 'getgrnam' in statically linked applications requires at runtime the shared libraries from the glibc version used for linkingstream/stream.a(network.o): In function `check4proxies':network.c:(.text+0x13c): warning: Using 'gethostbyname' in statically linked applications requires at runtime the shared libraries from the glibc version used for linkingstream/stream.a(tcp.o): In function `connect2Server_with_af':tcp.c:(.text+0x120): warning: Using 'gethostbyname2' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
Powered by