数控机床出现的报警及解决方法-技术文章-苏州泽升精密机械仪器有限公司
<img id="zhantai_logo" src=/1/778752.jpg alt=苏州泽升精密机械仪器有限公司 onload="120<=this.width?this.width=120:this.90
苏州泽升精密机械仪器有限公司
信和光栅尺,数显表维修,三坐标测量仪,二次元测量仪
&您所在位置：首页 &
& 数控机床出现的报警及解决方法
请输入产品关键字：
苏州泽升精密机械仪器有限
地址：苏州市人民北路3188号
邮编：215000
联系人：尹冬保
电话：传真：手机：/留言：个性化：
数控机床出现的报警及解决方法
数控机床出现的报警及解决方法T WORD ERROR (T 码错误)LOW OIL LEVEL (油位低)SPINPLE FAULT (主轴故障)SPINDLE ALARM (主轴报警)EXTERNAL EMG STOP (急停按钮被按下)AC NOT READY (交流盘未准备好)SPINPLE LUBE FAULT (主轴润滑故障)T CODE ERROR (T代码出错，非法T代码)M CODE ERROR (M代码出错，非法M代码)SERVO NOT READY (伺服未准备好)NC NOT READY(NC没准备好)TURRET FAULT (转塔故障)TURRET LIMIT (转塔限位)DC 24V OPEN (直流24断开)+24V NOT READY(+24V没准备好)GRAR DRIFT (档位漂移)PLEASE AXIS RETURN HOME(轴未回零)PLEASE DRUM RETURN HOME(刀库未回零)AIRPRESSFAILURE(气压故障)UNCL TOOL FALL(松刀失败)AIR PRESSURE DROP (压缩空气压力过低)CLAMP TOOL FALL(夹刀失败)DRUM NOT PARKED(刀库未在原值)X ZERO POINT NOT REACHED (X 轴未回零)Y ZERO POINT NOT REACHED (Y 轴未回零)Z ZERO POINT NOT REACHED (Z 轴未回零)4TH ZERO POINT NOT REACHED (第4轴未回零)X AXIS OVERTRAVL(X轴超限)Y AXIS OVERTRAVL (Y轴超限)Z AXIS OVERTRAVL (Z轴超限)COUNTER SWITCH REEOR (计数开关故障)MASTERT RANSFER OVER TEMP (主变压器过热)Z AXIS NOT AT FIRST REF POSITION (Z轴未在第一参考点)SPINDLE ORIENTATION FALLURE (主轴定向失败)TOOL DESENT OR TOOL DATA REEOR (刀具数据错误)PLEASE UNLOAD THE TOOL ON SPRINELK (请卸下主轴上的刀)PLEASE LOAD TOOL ON APINDLE (请装上主轴上的刀)A AXIS UNCLAMP FAIL (A 轴松开失败)A AXIS CLAMP FAIL (A 轴夹紧失败)DRUM OUT TO APRONDLEIS FALL (刀库摆向换刀位失败)MG SWING OVERLOAD(刀库摆动过载)DRUM BACK PARK IS FALL (刀库摆回原始位失败)TURRENT MOTOR1 OVERLOAD (刀库移动电机过载)COOLANT MOTOR OVERLOAD (冷却泵过载)DRUM ATC FAULT (自动换刀失败)TOOLS UNLOCKED (刀具未锁紧)BATTERY ALARM (电池报警)DRUM POSITION SWITCH ERROR (刀库位置检测开关故障)DRUM NOW NOT AT PARK (刀库未在原始位置)IT DANGOU TO MOVE DRUM (刀库禁动)POT UO FAILOR POT NOT AT UP POSITION (刀套未在水平位)POT DOWN FAIL (刀套翻下动作失败)IT IS DANGOUR TO MOVE ARM (机械手禁动)THE SPINDLE STATU IS ERROR (主轴状态错误)ARM MOTOR OR ARM SWITCH FALL (机械手或机械手开关故障)CENTRE LUBRICATION FALL (中心润滑故障)THE WORK NOT CLAMPED (工件未夹紧)AUTO TOOL CHANGE FAULT (自动换刀失败)TOOL DATA OUT OF RANGE (指令刀具号超出范围)THE ORDER TOOL NOW IN SPINDLE (目标刀具在主轴上)THE THREE SPINDLE SWITCH FAULT (主轴上的接近开关)THE CENTRE COOLANT IS LOWER (刀具内冷泵液位过低)DRUM RETURN 1# POSITION FAULT (刀库自动回零失败)SPINDLE OVERLOAD (主轴过载)关注我们的微信公众号shukongzhpngguo，获取更多数控技术文章。TURRENT MOTOR OVERLOAD (刀盘转动电机过载)CHIP CONVEYER OVERLOAD (拉屑器过载)HARD LIMIT OR SERVO ALARM (硬限位或伺服报警)NO LUB OIL (无润滑油)INDEX HEAD UNLOCKED (分度头未锁紧)MT NOT READY(机床没准备好)MG OVERLOAD (刀库过载)LUB EMPTY(润滑无油)AIR PRESSURE(气压不足)COOLANT NOT READY(冷却没准备好)LUBE EMPTY(油雾油位低，润滑油位低)LUB PRESSURE LOW(润滑压力低)CONVEY VERLOAD(排屑过载)LUB OVERLOAD(润滑过载)LUBE PRESSURE LOW(油雾压力低)SERIAL SPINDLE ALARM (串行主轴报警)NC BATTERY LOW ALARM(NC电池低报警)MAGAZINE MOVE LIMIT SWITCH ERRORSPINDLE TOOL UNLAMP POSITION LIMIT SWITCH ERRORMAGAZINE NOT IN POSITION OR SENSOR ERRORAIR PRESSURE LOW ALARM(气压低报警)MOTOR OVERLOAD(电机过载)T CODE & MAGAZINE TOOLST CODE & 1 ERROR5TH AXIS HARDWARE OVERTRAVER LIMIT ERRORDOOR IS OPENED(开门)LUB PRESSURE SWITCH ERROR(油压开关错误)SPINDLE OIL COOLANT UNIT ERRORSPINDLE LOAD ABNORMAL(主轴负荷异常)TRANSDUCER ALARM(传感器报警)BED-HEAD LUBRICATE OFF(床头润滑关闭)EMG OFFHYDRAULIC CHUCK PRESS LOW(液压夹头压力低)HYDRAULIC TAIL PRESS LOW(液压尾座压力低)LUB 0IL LOW(油压低)TURRET CODE ERROR(转塔码错误)TURRET RUN OVERTIME(转塔运行超时)MANUAL HANDLE INTERRUPTTRY TO RUN SPINDLE WHILE CHUCK NOT LOCKTRY TO RUN SPINDLE WHILE TAIL NOT LOCKSPINDLE NEUTRAL GEARMAGAZINE ADJUSTHYDRAULIC NOT RUNSAFETY DOOR BE OPENEDSAFETY DOOR NOT CLOSENOT ALL AXIS HAVE GONE BACK REFIN ADJUST,IGNORE GOING BACK REFAFTER EXCHANGE TOOL,CYCLE STARTATC MOTOR QF16 OFFX AXIS IS LOCKED(X 轴被锁定)Y AXIS IS LOCKED(Y 轴被锁定)Z AXIS IS LOCKED(Z 轴被锁定)A AXIS IS LOCKED(A 轴被锁定)SPINDLE MOTOR FAN QF26 OFF(主轴电机风扇QF26关闭)关注我们的微信公众号shukongzhpngguo，获取更多数控技术文章。SPINDLE ORIENTATION INCOMPLETE(主轴定位不完全)M FUNCTION NOT COMPLETE(M 功能无法完成)SPINDLE NOT IN GEAR POSITION(齿轮不在主轴位置)SPINDLE NOT CHANGED TO LOW GEAR(主轴没有变为低档)SPINDLE NOT CHANGED TO HIGH GRAR(主轴没有变为高档)MAG NOT BACKWARDSPINDLE TOOL NOT CLAMPSPINDLE TOOL NOT UNCLAMPMAG NOT IN POSITIONMAG DOES NOT ROTATEMAG DOES NOT STOP RUNNING[NextPage]A AXIS HAVE NOT CLAMPEDA AXIS HAVE NOT UNCLAMPEDSET D499=1,"MAG.JOG" SWITCH ONHYDRAULIC MOTOR QF7 OFF( 液压马达QF7关闭 )HYDRAULIC TEMPRETURE HIGH( 液压使用温度高 )HYDRAULIC FILTER BLOCKED(液压过滤器阻止)HYDRAULIC OIL LEVEL LOW( 液压油位低 )HYDRAULIC FAN QF8 OFF(液压风扇QF8关闭)HELIX CONYER QF9 OR QF10 OFFCHAIN CONYER QF11 OFFCOOLANT MOTOR QF12 OFF(冷却液电机QF12关闭)COOLNT LEVEL LOW,CYCLE STOP AFTER 20 MINUTESINNER COOLANT BLOCK(内冷却堵塞)SPINDLE COOLANT MOTOR QF14 OFF(主轴冷却液电机QF14关闭)INNER COOLANT QF13 OFF(内冷却液QF13关闭)MAG MOTOR QF15 OFFCABINET COOLANT EQUIP QF20 OFFOIL GATHER QF24 OFFAIR PRESSURE LOW(低气压)SPINDLE COOLANT MOTOR FAULT(主轴冷却液电机故障)LUB.OIL IS LOW(润滑油低)DOOR OPEN(门打开)FRONT DOOR(R) OPEN(前门打开)LEFT DOOR OPEN(左门打开)LUBRICATION OIL QF23 OFF(润滑油QF23关闭)LUBRICATION PRESS LOW(润滑油位低)IN ADJUST,MAG CAN&#39;T EXCHANGE T(在调整，刀库不能交换T)NOT ALL DOOR CLOSED(门没有全部关闭)IN M06,MAG NOT READY(在M06，刀库未准备好)MAGAZINE NOT READY(刀库未准备好)POCKET NOT HORIZANTALIN M06,Z NOT BACK TO 2ND REFIN M06,Z AXIS NOT IN PSW1ATC NOT IN ZERO POSITIONSPINDLE ORIENTATION UNCOMPLETEPOCKET NOT HOR./MAG NOT BCKWRDPOCKET NOT VER./MAG NOT FORWRDUNCLAMP TOOL HAS NOT COMPLETEDCLAMP TOOL HAS NOT COMPLETEDAIM TOOL NO. IS WRONGMAG NOT BACKWARDAFTER RETRACT,SET R.T.BACK OFFZ NOT IN PSW2,FORBID ATC RUNNINGD499 EQUAL 1MAG.JOG SOFT SWITCH IS ONZ NOT IN PSW2,FORBID MAG FORWARDCHEKE SPINDLE MODULE ALARMOIL WATER SEPARATOR QF24 OFFSET THE SOFT SWITCH MAG.JOG OFFSET D499 TO 0 设定D499为0K PARAM ABOUT MAG SET IS WRONG 关于MAG的K参数设定错误MECHANICAL BRAKE NOT RELEASED机床抱闸没有松开MECHANICAL BRAKE IS WRONG 机床抱闸错误PLEASE ADD LUB.OIL 请加润滑油PROBE BATTERY VOLTAGE IS LOW 探头电池电压低PROBE IS ERR 探头错误PARAMETER WRITE ENABLE(参数写使能)PMC EDIT ENABLE(PMC编辑使能)CHECK LUB ROUTINSPINDLE GEAR SIGNAL MISS 主轴档位信号消失T_CLAMPED_SIGNAL MISS T夹紧信号消失SP OVERRIDE SWITCH DISCONNECTION 主轴倍率开关断路FEED OVERRIDE SWITCH DISCONNECTION 进给倍率开关断路THE TOTAL NUMBER OF POCKETS SET ERRCHANGE T STOPED BECAUSE NO AIR 因为缺少压空交换停止THE COOLANT WATER TOO LOW,ADD COOLANT WATER AT ONCE 冷却水少立即加水COOLANT LEVEL LOW,ADD COOLANT WATER 冷却水液位低PLEASE REPLACE CNC BATTERY QUICKLY 请立即更换CNC电池有些还没有翻译，仅供参考。SIEMENS常用缩略语A Output 输出ASCII American Standard Code for Information Interchange 美国信息交换标准代码AV Preparation for work 运行准备BA Operating mode 运行方式BAG Operating mode groups 运行方式组BB Ready for operation 准备好运行BCD Binary Coded Decimals 二-十进制BHG Hand-held terminal 手提终端BOF User interface 用户接口CNC Computerized Numerical Control 计算机化数字控制CP Communication Processor 通迅处理器CPU Central Processing Unit 计算机中央处理装置CR Carriage Return 托架折回CSB Central Service Board(PLC module) 中央维护板，PLC 模块CTS Clear To Send 发送使能DAU Digital-Analog Converter 数模转换器DB Data Block 数据块DIN German Industrial Standards 德国工业标准DIO Data Input/Output 数据输入/输出DRF Differential Resolver Function 差分功能DRY Dry Run 空运行DSB Decoding Single Block 译码单段DSR Data Send Ready 备用输入DW Data Word 数据字E Input 输入EIA-Code Special tape code,number of holes per characters always odd 特殊纸带码，每个字符的孔数为奇数EPROM Programm memory with fixed program 有固定程序的程序存储器E/R Controlled Supply and Energy Recovery Module 可控电源和能量恢复模块ETC ETC key:Extension of the softkey bar in the same menuETC 键：同级菜单扩展键FDB Product designation database 产品指定数据库FIFO First in First Out 先进先出FRA Frame module 帧频模块FRAME Coordinate conversion with the components zerooffset，rotation，scaling，mirror-imaging 坐标换算，具有零点偏置，坐标旋转，标度功能和镜向功能FRK Cutter radius compensation 铣刀半径补偿FST Feed Stop 停止进给GUD Global User Data 全体用户数据HMS High-Resolution Measuring System 高分辨率测量系统HSA Main Spindle Drive 主轴驱动HW Hardware 硬件IM Interface Module 接口模块IM-S/R Interface Module(S=send/R=receive) 接口模块，S=发送/R=接收INC Increment 步进增量ISO-Code Special tape code,number of holes per character always even特殊纸带码，每个字符的孔数为偶数K1...k4 Channel 1 to Channel 4 通道1 到通道4KOP Ladder Diagram 梯形图KV Loop-Gain Factor 增益系数KUE Transformation Ratio 传动比LCD Liquid Crystal Display 液晶显示LED Light Emitting Diode 发光二极管显示LUD Local User Data 局部用户数据MB Megabyte 兆字节MD Machine Data 机床数据MK Measuring Circuit 测量回路MDA Manual Data Automatic 手动输入，自动执行MLFB Machine-readable product designation 机器可识别的产品代号MMC Man Machine Communication:User interface of the numerical controlsystem for operation,programming and simulation 人机通讯：系统操作界面，用操作，编程和模拟MPF Main Program File：NC part program(main program)NC 零件程序，主程序MPI Multi Point Interface 多点通讯接口MSTT Machine control panel 机床控制面板NC Numerical Control 数字控制NCK Numerical Control Kernel(numerical krnel with block preparation,traversing range etc.) 数字控制核心：具有程序段预处理,运行范围等等NCU Numerical Control Unit 数控单元NURBS Non Uniform Rational B Spline 非均值有理B样条NV Zero Offset 零点偏置OEM Original Equipment Manufacturer 原设备制造商OP Operator Panel 操作面板OPI Operator Panel Interface 操作面板接口PC Personal Comprter 个人计算机PCMCIA Personal Computer Menory Card International Association 接口协议PG Programming Device 编程器PLC Programmable Logic Control 可编程逻辑控制器PRT Program Test 程序测试RAM Random Access Memory 随机存取存储器RISC Reduced Instruction Set Computer 处理器，具有指令组小、通过能力强ROV Rapid Override 快速修调RPA R Parameters Active(NCK memoty area for R parameter numbers)R 参数有效，NCK 中用于R 参数号的存储器区RTS Request To Send(control signal from serial data interfaces)发送请求：来自串行接口的控制信号SBL Single Block 单段SBL2 Single Block Decoding 译码单段SEA Setting Data Active(memory area for setting data in NCK)设定数据有效：用于NCK 中设定数据的存储区SD Setting Data 设定数据SKP Skip Block 程序段跳跃SM Signal Module 信号模块SPF Sub Program File 子程序文件SPS Programmable Logic Controller 可编程逻辑控制器SRK Cutter Radius Compensation 刀尖半径补偿SSFK Leadscrew Error Compensation 丝杠螺距误差补偿SSI Serial Synchronous Interface 串行同步接口SW Software 软件TEA Testing Data Active(with reference to the machine data) 测试数据有效：与机床数据有关TO Tool Offset 刀具补偿TOA Tool Offset Active(memory area for tool offset) 刀具补偿有效，用于刀补的存储区TRANSMIT Transform Milling into Turning(coordinate conversion onturning machines for milling)铣床转换为车床：车床坐标换算用于铣削加工VSA Feed drive(spindle) 主轴进给驱动V Bit type PLC variable PLC变量类型：位VB Byte type PLC variablePLC变量类型：字节WKZ Tool 刀具WZ Tool 刀具WZK Tool offset 刀具补偿ZOA Zero Offset Active(memory area for zero offsets)零点偏置有效：零点偏置存储区
中国化工仪器网 设计制作，未经允许翻录必究.Copyright(C)
, All rights reserved.
以上信息由企业自行提供，信息内容的真实性、准确性和合法性由相关企业负责，中国化工仪器网对此不承担任何保证责任。
温馨提示：为规避购买风险，建议您在购买产品前务必确认供应商资质及产品质量。
扫一扫访问手机站[Province:
Binary Cooling Vertical Thermal Shock Testing Machine
5655.0 USD
Trade Term:
Payment Terms:
T/T,L/C,WU
Trade on HiSupplier, Worry Free Guarantee
oTrading safety, secure your money, lower the risk, protect both buyers and suppliers
oHiSupplier is a Chinese multinational company in U.S, it helps to coordination and order landing.
Company Profile
Company Info
Established in 1988, Dong Guan ASLi test Instrument.,Co.Ltd,&(HongKong company :ASLi (China) Test Equipment Co.Ltd) beginning located in TaiPei TaiWan, is specialize in manufacturing a variety of quality inspection instruments, testing equipments and other high-tech products which mainly include: Programmable constant Temperature & Humidity Test Chamber, High & Low Temperature cycle Test Chamber, Fast Temperature Change Test Chamber,Thermal shock test chamber / High Low temperature shock test ch...
Company Profile
Year Company Registered:
Annual Sales Amount:
US$10 – 50 Million
Total No. of Staff:
51 – 100 People
No. of R&D Staff:
5 – 10 People
No. of Engineers:
5 – 10 People
Export Ratio:
71% – 80%
OEM Services Provided:
Payment Terms:
T/T, L/C, WU
Business Type:
Manufacturer, Trading Company
Quality Certificate:
CE, GB, ISO9000
Main Export Markets:
North America, Western Europe, Eastern Europe, South America, Southeast Asia, Eastern Asia, Mid East, Oceania, Africa
Competitive Advantage:
1. 25 years manufacture2. 500 worldwide customers' favourable common3.
in store/strong supply capacity for fast delivery4.
12 month warranty for whole set machine
Strength Testing Machine&
Electronic&
Brand Name:
External Dimension WxHxD:
Model No.:
Place of Origin:
Guangdong&&
Min.Order:
1 Set/Sets
Means of Transport:
Land, Ocean, Air
Production Capacity:
Packing:power meeting
Delivery Date:
Binary Cooling Vertical Thermal Shock Testing Machinep&thermal shock test chamber/application:Temperature shock tester is used to test the capability of material structure or composite materials to withstand the continuous environmental changes between extremely high temperature and low temperature during a short period, and therefore understand the chemical changes or physical damages caused by expansion from heat and contraction from cold in the shortest possible time. It is applicable to metals, plastic, rubber, electronics amongst other materials. The test result can be used as a reference or basis for product improvement.thermal shock chamber/features:1.It is divided into three zones: high temperature zone, low temperature zone, and testingzone. The test sample is in static mode.2.Using touch-control graph control as operation interface, easy to operate.3.Applying wind route conversation to the shock method to distribute temperature to the testing zone for cold and thermal shock measurement.4.For high temperature shock or low temperature shock, max. time is up to 999H, and max. circulation cycles are 9999 times.5.The system can be used for automatic Circulation Shock or manual selective shock.6.Adopt binary cooling system, with quick cooling effect. Cooling method is water cooling.Warranty: one year free warranty for whole set machine,lifelong time maintainance.After-sale service: feedback within 2 hours after get the call.Service:OEM service,Design service,Buyer lable service.Shock chamber/technical parameters:1.Model:TS-150(A~C)2.Internal Dimension WxHxD (mm):600x500x5003.External Dimension WxHxD (mm):00 504.Temperature of Heat-Storing Slot/Heating Time:RT~200celsius degree/About45mins5.Temperature of Cool-storing Slot/Cooling Time:RT~-75celsius degree/ About 100mins6.Temperature Recovery Time/Conversion Time:≤5min/≤5sec7.Internal and External Material:Material of the inner box is SUS 304# stainless steel,of the outerbox is stainless steel orSEE cold-rolled steel with paint coated.8.Mechanics:P.I.D+S.S.R+ Micro-computer balanced temperature control system9.Security Protection Devices:Non-fuse breaker, high and low pressure protective switch of thecompressor ,refrigeratorhigh-pressure protective switch, failure warning system, electronic alarmMs. Rachel Lee(Sales Manager)Company Name:ASLi (CHINA) TEST EQUIPMENT CO., LTDCompany Add.:JinHui Industrial Park, LiXin town,East City district 523000,DongGuang City,ChinaTel.:64266Cell.7384Fax:51784Email:rachel(&&
Send message to this supplier
Rachel Lee (Sales Manager)
Tel: 86-769-
Enter between 20 to 3,000 chatacters.
Contact Method
Dongguan Asli Test Instrument Co., Ltd.
JinHui Industrial Park, LiXin town,East City district 523000,
Guangdong,
China (Mainland)
Fax: 86-769-
Related Products
Model No.:TS-150&
Usage:Strength Testing Machine&
Power:Electronic&
Brand Name:ASLI&
External Dimension WxHxD:50&
Place of Origin:Guangdong&
Payment & Shipping Terms:
Unit Price: 5655.0 USD
Trade Term: FOB
Payment Term:
L/C, WU, T/T
Min.Order:
1 Set/Sets
Means of Transport: Ocean,Land,Air
Supply Capacity:
Production Capacity: see note
Packing: power meeting
Delivery Date: 20days
[Province:&]&&
Send message to this supplier
Rachel Lee (Sales Manager)
Tel: 86-769-
Enter between 20 to 3,000 chatacters.
Contact Method
Dongguan Asli Test Instrument Co., Ltd.
JinHui Industrial Park, LiXin town,East City district 523000,
Guangdong,
China (Mainland)
Fax: 86-769-
Didn't find what you're looking for?
contact our
User Guide
Featured Partners:
Follow Us:
Browse by:
Language Option:
Copyright (C)
Online Inc. All Rights Reserved.CWT5016 refrigerator GSM SMS temperature controller
Business type: Manufacturer, Seller
Telephone :
S403, 4th Floor, Ke Ji Zhong Er Road NO39 High-tech Zone, NanShan District, SHENZHEN, Guangdong
Supplier`s last login times: within 39 hours
Product Details
Company Profile
CWT5016 GSM GPRS Refrigerator Controller, SMS Temperature High/Low
AlarmSupports 3G version(Skype: Glare.Wang)1- SMS Temperature High / Low Alarm2- SMS Power Failure Alarm3- GPRS Temperature Realtime Data Logger4- Support 4 DS18B20 Temperature Data LoggerWe Provide FREE GPRS Server Software, Please contact us for more
details!!!4 temperature inputs featureDS18B20 special input, 4 channelsTemperature rang -55°C ~ +125 °CPreset high and low level to alarmCurrent temperature can be query by smsGPRS featureSupport connects 4 servers, the servers must connect internet and
have static public IP address or Dynamic Domain nameGPRS Transmission base on TCP/IPSupport modbus TCP protocol or CWT_IO protocol4 digital inputs featureUpload status to server when inputs are triggeredUpload inputs status to server on scheduleRemote query inputs status by GPRS or SMSSupport SMS alarmConfigurable for alarm and recover sms4 analog inputs featureCan preset normal range for AD input, upload data to server when
above the normal range.Current values can be query by server or smsConfigurable for alarm and recover SMSSupport offset and gainScreenshot of Program Software:SpecificationsParameterDC Power supply9-28V DC (Standard adapter: DC 12V/1.5A)Power consumption12V input Max. 150mA/Average 50mAFrequency rangeDual-frequency 900/0MhzSIM CardSupporting 3V SIM CardAntenna50 Ω SMA Antenna interfaceSerialRS232Temperature range-30°C ~ +70 °CHumidity rangeRelative humidity 95%Digital Input4 digital inputs(Dry contact)output4 drivable relay outputs(open-collector outputs)Output drive voltageEqual to input DC voltageOutput drive powerDrive voltage ≤35V, drive current ≤500mAAnalog Input4 analog inputs(4~20mA or 0~5V)Temperature input4 DS18B20 inputs (temperature range -55°C ~ +125 °C )memory256KAudio interface3.5mm audio in and audio outExterior dimension130×80×25mmWeight370 g
&&&&&&&&&&&&&
Send your message to this supplier
Enter your Email please.
Your email is incorrect!
CWT Co., Limited
Characters Remaining: (0/3000)
Please enter 20 to 3000 characters to contact this supplier!
Other about CWT5016 refrigerator GSM SMS temperature controller
You may also be interested in
Select All君，已阅读到文档的结尾了呢~~
GE公司生产的9E燃气轮机的报警及汉语解释大全。某厂现场资料
扫扫二维码，随身浏览文档
手机或平板扫扫即可继续访问
举报该文档为侵权文档。
举报该文档含有违规或不良信息。
反馈该文档无法正常浏览。
举报该文档为重复文档。
推荐理由：
将文档分享至：
分享完整地址
文档地址：
粘贴到BBS或博客
flash地址：
支持嵌入FLASH地址的网站使用
html代码：
&embed src='/DocinViewer-4.swf' width='100%' height='600' type=application/x-shockwave-flash ALLOWFULLSCREEN='true' ALLOWSCRIPTACCESS='always'&&/embed&
450px*300px480px*400px650px*490px
支持嵌入HTML代码的网站使用
您的内容已经提交成功
您所提交的内容需要审核后才能发布，请您等待！
3秒自动关闭窗口