192.168.1.4登录页面4

来源：蜘蛛抓取(WebSpider) 时间：2018-08-24 02:56 标签： 192.168.1.4客户端
我手机为什么打不开http：//192.168.1.4：_百度知道
我手机为什么打不开http：//192.168.1.4：
答题抽奖
首次认真答题后
即可获得3次抽奖机会，100%中奖。
采纳数：19
获赞数：117
用电脑试试
可是我用三星手机可以打开，小米手机打不开呀
为你推荐：
其他类似问题
个人、企业类
违法有害信息,请在下方选择后提交
色情、暴力
我们会通过消息、邮箱等方式尽快将举报结果通知您。192.168.4.1_IP192.168.4.1_IP地址192.168.4.1_192.168.4.1是什么IP_192.168.4.1在哪儿_IP地址查询_911查询
192.168.4.1
请输入IP地址或域名，例如
192.168.4.1 IP192.168.4.1 IP地址192.168.4.1 192.168.4.1是什么IP 192.168.4.1在哪儿 192.168.4.1归属地
192.168.4.1
IP 192.168.4.1 →
192.168.4.1 归属地信息
主站数据：192.168.4.1 → 未分配
参考数据：192.168.4.1 → 本地局域网
参考数据：192.168.4.1 → 局域网
我的IP地址 192.168.4.1 本机IP地址 192.168.4.1 地理位置
IP地址：192.168.4.1归属地：未分配
IP地址查询为您提供192.168.4.1,IP192.168.4.1,IP地址192.168.4.1,192.168.4.1是什么IP,192.168.4.1在哪儿,192.168.4.1归属地
别人正在查
911查询 全部查询 网址：
(共19个)占卜求签
(共17个)民俗文化
(共15个)交通出行
(共10个)学习应用
(共26个)休闲娱乐
(共10个)站长工具
(共7个)身体健康
&2018 　京ICP备号-3　京公网安备 66号　
911查询大全 微信公众号微信扫一扫关注路由器lan地址设置了192.168.1.4,dhcp也关了,怎么设置电脑ip才能登陆路由器
按时间排序
如果路由lan地址设置成了 4 而不是 1 应该是设置成了ap模式或者中继模式（除非故意设置成4，也没有问题）。 电脑网卡只要在192.168.1.xxx 这个网段就可以登录路由器。因为关闭了dhcp，网卡需要手动设置ip地址，比如设置成192.168.1.10 子网掩码255.255.255.0,网关 192.168.1.4，保存电脑打开ie浏览器，地址栏输入192.168.1.4 即可登录路由器。其实，只要有根网线连接路由器会很少很多连接麻烦。如果用无线网络连接路由器会比较麻烦。
你是不是路由器级联路由器吧？如果是就不要在同一网段。如果你的路由器是直接连接宽带，它自然不会在同一了网的。
你 重新启动一下 路由器在把网线拔插一下 看 看 ？？还有 猫的 那条线是不是接路由的wan口？？网线确定没有问题吗？？？
感谢您为社区的和谐贡献力量请选择举报类型
经过核实后将会做出处理感谢您为社区和谐做出贡献
确定要取消此次报名，退出该活动？
请输入私信内容：以下试题来自：
单项选择题LINUX支持网络文件系统NFS，下列哪个命令实现了将位于192.168.1.4机器上的/opt/sirnfs目录挂载到本机/mnt/sirnfs下：（）
A.mount-tnfs192.168.1.4：/opt/sirnfs/mnt/sirnfs
B.mount-tnfs/mnt/sirnfs192.168.1.4：/opt/sirnfs
C.mountnfs&t192.168.1.4：/opt/sirnfs/mnt/sirnfs
D.mountnfs&t/mnt/sirnfs192.168.1.4：/opt/sirnfs
为您推荐的考试题库
您可能感兴趣的试卷
你可能感兴趣的试题
A.生成目标文件test.o
B.生成汇编文件test.s
C.进行预编译
D.包含调试信息
A.framebuffer
B.Qt/Embedded
C.Nano-XWindow
A.外围的硬件初始化（串口，USB等）；
B.根据用户选择，进入命令行模块或启动kernel。
C.寄存器的初始化
D.堆栈的初始化
A.响应快的系统
B.时间约束的系统
C.单任务系统
D.内核小的系统Aping Vision/STS/Photographer's Choice RF/Getty Images
Internet & Network
Key Concepts
Guides & Tutorials
Installing & Upgrading
Tips & Tricks
What Are Bitcoins?
Bradley Mitchell
192.168.1.4 is the fourth
in the range between 192.168.1.1 and 192.168.1.255. Home
often use this range when assigning addresses to local devices. A router can assign 192.168.1.4 to any device on the local network automatically, or an administrator can do it manually.
Computers and other devices that support dynamic address assignment using
can obtain an IP address automatically from a router. The router decides which address to assign from the range it is set up to manage (called the "DHCP pool").
For example, a router is set up with a local IP address of
normally maintains all of the addresses starting with
and ending with 192.168.1.255 in its DHCP pool. The router typically assign these pooled addresses in sequential order (although the order is not guaranteed). In this example, 192.168.1.4 is the third address in line (after 192.168.1.2 and ) for allocation.
Computers, phones, game consoles, printers, and some other kinds of devices allow setting an
manually. The text "192.168.1.4" or the four digits 192, 168, 1 and 4 must be keyed into an IP or Wi-Fi configuration screen on the device. However, simply entering the IP number does not guarantee the device can use it. The local
must also have its
(network mask) configured to support 192.168.1.4. See: .
Most networks assign private IP addresses using . Assigning 192.168.1.4 to a device manually (a process called "fixed" or "static" address assignment) is also possible but not recommended unless done by trained professionals.
result when two devices on the same network are given the same address. Many home network routers have 192.168.1.4 in their DHCP pool by default, and they do not check whether it has already been assigned to a client manually before assigning it to a client automatically. In the worst case, two different devices on the network will be assigned 192.168.1.4 - one manually and the other automatically - resulting in failed connection issues for both.
A device that was dynamically assigned IP address 192.168.1.4 may be re-assigned a different address if it is kept disconnected from the local network for a long enough time period. The length of time, called a lease period in DHCP, varies depending on the network configuration but is often 2 or 3 days. Even after the DHCP lease expires, a device is likely to still receive the same address the next time it joins the network unless other devices have also had their leases expire.
Continue Reading

我要回帖

更多关于 192.168.1.4客户端 的文章

 

随机推荐