谁能告诉我cs里的对话 翻译出来多是什么意思 ？？_百度知道
谁能告诉我cs里的对话 翻译出来多是什么意思 ？？
我知道的有 enemy down
fire in the hole
Roger that
还有很多请各位帮帮我！！
提问者采纳
进入服务器主机平台模式，后输入 sv_cheats 1 启动作弊模式。然后输入 changelevel 地图名称，这样以后就可以输入以下的密码了 banid 几分钟 #编号 kick.......踢人Wonid让他换名字后也进不来，除非他换计算机，时间0=永远 deathmatch 1..................开dm模式,一个人一组，把其它人解决掉 decalfrequency 30.............玩家的logo多久可喷一次(秒) kick #编号....................踢人(server专用，踢编号需加#，踢名字不用，但大小写要一样) mapcyclefile mapcycle.txt.....选择地图切换的设定档，内定为mapcycle.txt，可准备好几份设定档 mp_autokick 1.................睡死和TK三次后自动被系统踢掉 mp_autoteambalance 1..........自动队伍平衡，0为准许双方人数不平均和Bot玩时的好参数! mp_buytime 1.5................以分钟计,即90秒内均可回基地买东西 mp_c4timer 45.................设定C4炸弹的爆炸时间。最低15秒，最高90秒 mp_chasecam 0.................设定观察员模式的玩家只能跟在别人的屁股 mp_consistency 1..............限制某些模型被更改，大的C4或大的别人的武器容易让人发现... mp_decals 250.................贴图分辨率，降低可减少lag mp_fadetoblack 1..............这样死后画面变黑 活人可以看得到尸体 mp_falldamage 1...............会不会摔伤 mp_flashlight 1...............开启/关闭可否使用手电筒。1是开启，0是关闭 mp_footsteps 1................开启/关闭脚步声。1是开启，0是关闭 mp_forcechasecam 0............死掉的人：0自由模式、1只能跟着自己队友走动、2尸体视线留在原地 mp_forcerespawn 0.............死后立即重新出发 mp_freezetime x...............每一场开始前的购物静止秒数 mp_friendly_genrade_damage 0..设定同队的是否可以手榴弹丢伤队友 mp_friendlyfire 0.............设定会不会杀伤队友。1是会，0是关闭 mp_ghostfrequency 0.1.........鬼魂每秒钟更新的频率,越高越不会Lag mp_hostagepenalty 13..........杀了多少人质或队友后会被踢 mp_limitteams 2...............队伍最大相差人数,太多人便不能再加入(mp_autoteambalance 1则相差到此人数server会自动平衡) mp_logfile 1..................开不开纪录文件(那要怎么存盘???) mp_logmessages 0..............是否把游戏间玩家的对话也记录到log文件中,此项必需同时设定&log on&&mp_logfile 1&才可生效 mp_lowlag 0...................子弹打在墙上的效果，速度快用0，慢用1 mp_mapvoteratio 0.6...........票选地图的人数达60%以上才会换地图，0.0-1.0 mp_roundtime 5................设定每回合的时间。(只能3~15分钟) mp_tkpunish 1.................TK者下回合会自杀 mp_weaponstay 0...............保留落下的武器 nightvision 1.................夜试镜能否使用 pauseble 0....................可以战斗中按暂停(Pause键,在F12键的右边第三颗) status........................列出玩家IP编号等 sv_accelerate 5.0.............加速 sv_aim 0......................自动瞄准头部 sv_airaccelerate 10...........空中移动的速度 sv_airmove 1..................可否在空中移动&转向 sv_bounce 1...................各种奖励金开启??? sv_cheats 0...................可不可以使用内定秘技 sv_clienttrace 1..............可能是有关网络封包的设定... sv_clipmode 0.................Server端切换是否允许Client端穿墙? sv_clipmode 0.................应该是对象是否用3D表示...like mp5...? sv_friction 40................3D画面方面的东西 sv_gravity 800................控制重力,800是正常重力,-999到999999 sv_maxrate 0..................限制网络传输的资料最大值 sv_maxspeed 320...............最大速度 sv_minrate 0..................限制网络传输的资料最小值 sv_password 0.................进入游戏的密码 sv_restartround 0.............设定每隔几分钟回复分数/武器/金钱的初始值。(没效...?) sv_sendvelocity 0.............设定1开启较复杂的花样以及物理设定,适用较快的Server sv_stepsize 18................脚步大小..-_-; 越大爬坡越快吧... sv_waterfriction 10...........水中的阻力... users.........................列出线上使用者名称及Userid(Server产生)及Uniqueid(WON server产生) changelevel 地图名............立刻换地图，所有USER不会离开游戏 map 地图名....................立刻换地图，但所有USER会离开游戏。 mp_maxrounds X................X→几回合之后自动换地图 mp_winlimit X.................任一队胜X场便换图,例5战3胜制,X=3 mp_timelimit 45...............每隔多少时间换一次地图(以上三个只能选一个,因此要&mp_maxrounds 20&前要先&mp_timelimit 0&) sv_rcon_maxfailures 5.........试图取得管理员权限失败超过几次，CDKEY即被BAN sv_rcon_minfailuretime 30.....单位秒。如果在此时间内试图取得管理员权限.又失败了 sv_rcon_minfailures...........指定的次数，该CDKEY即被BAN sv_rcon_banpenalty 0..........指定在试图取得管理员权限中如果BAN CDKEY，BAN多久。0=永远 玩家用参数 adjust_crosshair..............每打一次准心就会换颜色，共有五种颜色，选个亮一点吧!! ah 1..........................设定是否开始自动说明(戏中给玩家引导) cl_allowupload 1..............允许用户方上传自己的资料如logo cl_allowdownload 1............允许用户方自动下传sever的资料如map cl_download_ingame 1..........允许用户方在game中自动下传sever的资料,如logo,map cl_cmdrate 30.................modem用户设30,宽频设40~50,Lan=50 cl_lw X.......................有无武器的动画,最好设x=1 cl_lb 0.......................此项与血渍有关,设1比较真实,但会减低速度 cl_lc 1.......................和cs的新的网络技术有关,最好设x=1 cl_hidefrags 1................设定是否隐藏除了自己以外其它人的杀敌数与死亡数 cl_observercrosshair 1........设定在观察员模式的时候是否要开起准星 cl_updaterate 20..............上传速度,如果是宽频设30~40,如果在比较多人的站设25,modem=15,Lan=50 con_color 255 155 50..........HUD的颜色(RGB) dm 1..........................设定1来开启游戏开始时的讯息介绍 drawradar.....................显示雷达,有时雷达会突然消失,就可以用(有时候SERVER关掉了你按也没用) fastsprites 0.................烟雾特效，0逼真，1像超任，2像GameBoy fps_max X.....................X=1-100,游戏输出给显示卡的最大fps数，设高设底各人喜欢。但最好不要底于72。 hideradar.....................关闭雷达(测试你懂不懂得辨认队友，以免tk) hud_centerid 0................设定为1时，玩家ID会出现在屏幕的正中央。否则会出现在画面的左下角。 hud_fastswitch 0..............快速换武器，按数字直接换不用再按鼠标 keys..........................显示自己的CD-KEY信息(CS没效???) kill..........................自杀!!死定的时候……了断自已吧… lefthand 0....................设定屏幕上的玩家是左撇子，或是右撇子。 listmaps......................显示server的地图排程 listplayers...................显示大家的编号与姓名 maps 开头.....................列出已安装之地图档名,(只列出指定字母开头的文件名，*为所有地图) max_shells 50.................子弹的最大显示数量(太多会lag...)0-500 max_smokepuffs 50.............烟雾弹的最大显示数量，0-500 name 新名字...................换名字，活着的时候才能用 nightvision...................开关夜视镜 r_speeds 0....................以console文字方式显示平均fps,draw speed及polygon info?? r_speeds 0....................强制工作!!对网速能稍做改善！有没有效果……自已看吧！?? rate 2500.....................从server接受信息的速度，太大太小都会lag，要选适合的 setinfo ah 1..................是否提供自动说明的功能 setinfo dm 1..................换地图后开启地图的简介 setinfo ghosts 0..............观察模式时是否鬼魂关掉,对lag有帮助 setinfo lefthand 0............设定屏幕上的玩家是左撇子，或是右撇子。 setinfo vgui_menus 1..........图形化选单开关 sizedown......................缩小屏幕 sizeup........................放大屏幕 timeleft......................让你知道还有几分钟换地图 version.......................显示版本信息 vote &编号&...................对TKer,Camper还有Cheater投票,过6成的人投票就行 votemap &地图名&..............玩家可以投票投下一张地图 sensitivity X.................鼠标速度0.1-不限?(20是config的最大值) zoom_sensitivity_ratio........设定使用狙击镜时鼠标移动速度 ping..........................显示Server ping client值 pingservers...................显示Client ping server值 net_graph x...................打开测FPS与联机速的工具 x=1开 x=0关,开起此项多少会减少fps net_graphpos x................工具的位置 x=1,2,3 net_graphwidth 192............工具的大小 volume 0.8....................调整音量大小,实际音量为(volume/hisound) hisound 1.000000..............设定音量最大值,实际音量为(volume/hisound) bgmvolume 1.000000............背景音效音乐之音量大小 disconnect....................离开游戏,保持在CS console状态 exit..........................离开游戏,关闭CS,回到桌面 quit..........................离开游戏,关闭CS,回到桌面 reconnect.....................不离线直接重组联机 retry.........................离线并重新联机 connect IP....................联机到指定Server cl_shownet 0/1................显示你的网络传输包值 命令 默认值 建议更改值 说明 cl_himodels 0 q0 使用较低细节的人物皮肤，提高显示速度 gl_playermip 2 qq0 渲染质量，越高数字质量越差显示也越快 max_smokepuffs q0 30 设定同时间可显示的烟雾数量（服务器端用） fps_max q72 100 显示最大FPS数，高性能机器可改大 mp_decals q20 200 最大同时显示贴图 hisound 0 1 高质量声音 loadas8bit q1 0 使用8bit音质（较低质量） s_a3d 0 0 使用A3D系列声卡设置为1 s_eax 0 0 使用创新系列声卡设置为1 bgmvolume 0 0 播放CD音乐,如果设为1，你可以放入任意一张CD，在玩游戏时就可听到CD cl_download_ingame q0 0 下载其它玩家LOGO、贴图等. gl_smoothmodels 1 3 人物动作更平滑 gl_round_down 1 3 声音方面 setinfo &ghosts& q0 0 是否显示鬼魂 setinfo &vgui_menus& 1 1 是否显示图形购买界面.0是文字界面。这项是各人喜欢. cl_gaitestimation 1 0 衔接人物两个动作 gl_picmip 0 2 渲染质量，越大的数字图象质量越低速度越快 r_drawviewmodel 0 1 显示武器 violence_ablood 1 1 开/关血渍的显示 viewframe qN/A N/A 打开wire-frame显示-只适用OpenGL显示模式 vid_wait q0 0 视频同步(sync)开关 vid_nopageflip q0 0 开关屏蔽视频页面翻动 vid_mode q0 0 设定视频模式 vid_describemode qqN/A N/A 显示视频模式的设定 vid_d3d qq0 0 开/关Direct3D模式的支持,一般我们都只用OpenGL. gl_lightholes qq0 1 光洞效果开关! 1.4新增！ gl_max_size qqq256 256 贴图材质的最大解析度 gl_max_size qqq256 256 贴图材质的最大解析度 give spaceweapon_awp 得到极地狙击枪 sv_aim 狙击枪自动瞄准 sv_gravity [-999~999999] 重力改变 lambert -1.0001 夜视能力 cl_hidefrags 0 看见别人的杀敌数 cl_forwardspeed 999 前进加速 cl_backspeed 999 后退加速 cl_sidespeed 999 左右平移加速 +reload 自动填弹 -reload 关闭自动填弹功能 mp_c4timer [1~100] 设定C4炸弹 sv_clienttrace 9999 启动超级自动瞄准功能 adjust crosshair 改变准星颜色 impulse101 金钱增加16000 timeleft 显示这张地图还剩多少时间 r_lightmap 1 lightmap成像模式 crosshair [1~5] 射击时放大准心 mp_freezetime [秒数] 设定每一回合开始的安全时间。0为关闭，预设值为8秒 mp_roundtime [3~15] 设定回合时间，预设值为5 mp_timelimit 设定地图变换的时间，预设值为0 mp_friendlyfrie [0 or 1] 切换队友射击模式 mp_footsteps [0 or 1] 脚步声(开/关)，预设值为1 mp_flashilght [0 or 1] 可使用手电筒(开/关)，预设值为1 cl_observercrosshair [0 or 1] 观察著模式时出现准星(开/关)，预设值为1 dm [0 or 1] 换地图时出现简报(开/关)，预设值为1 ghosts [0 or 1] 观察模式时可看见ghost(开/关)，预设值为0 ah [0 or 1] 出现协助讯息(开/关)，预设值为1 changelevel [地图名称] 更换地图 give [武器名称] 得到武器 skin [外衣名称] 选择外衣 gl_zmax [0~9999] 子弹打穿或看穿墙壁及障碍物，预设值为3600
提问者评价
虽然不是我想要的回答，但这个答案我更喜欢！！！！谢了！！！！再给你10得了，我的分没用。
其他类似问题
按默认排序
其他6条回答
〔Radio Commands (& Z &键) - 无线电指令〕1.&Cover me& (掩护我)2.&You Take The Point&(你守住这个位置)3.&Hold This Position&(各单位保持现在的位置)4.&REGROUP TEAM&(重新组队)，队友过于分散的?候可以用这个指令5.&Follow Me&(跟着我)6.&TAKING FIRE&(射击射击!!需要火力支援) 〔Group Radio Commands (& X &键) - 无线电指挥指令〕 1.&Go&(全队 行动/前进)2.&Fall Back&(全队 撤退/后退)3.&Stick together team&(全队保持一起行动/保持队形)4.&Get in position and wait for my go& (全队就位，等我冲出去?掩护我)5.&Storm the front&(全队正面快速突进)6.&Report in&(询问全队队员回报行动是否准备OK?)〔Radio Reports (& C &键) - 无线电回覆〕 1.&Affirmative/Roget&(收到/了解)2.&Enemy Spotted&(发现敌人)3.&need backup&(我需要支援)4.&Sector Clear&(此区域安全!!)5.&I'm in position&(我已经就定位!)6.&Reporting In&(回报行动准备OK)7.&She's gonna Blow!&(炸弹要爆炸了!!)8.&Negative&(否定)，用在回报行动准备尚未OK9.&ENEMY DOWN& (敌人死了)
装个中文语音，中文字幕的，多和电脑用用就知道什么意思什么效果了，熟悉以后再用英文的，就有个概念了也可以查字典玩英文游戏有前途，英文游戏玩多了，英语考试随便考都可以，我大学的时候英语课成天旷课还没挂，多亏了星际争霸和反恐精英哈哈
enemy down 敌人已被消灭fire in the hole 小心手雷Roger that 受到
不知道用1.6版啊！！！丢脸啊！！！人的脸你都丢尽了！！
等待您来回答
您可能关注的推广回答者：
下载知道APP
随时随地咨询
出门在外也不愁[精华] 本人珍藏啊！（之三） - ChinaUnix.net
[精华] 本人珍藏啊！（之三）
http://www.chinaunix.net 作者:&&发表于： 18:05:11
sybase配置&u&配置SYBASE服务器1.&为SYBASE&SERVER创建所需的设备建议将sybase&server的数据库设备创建在裸设备上，因此，在系统中创建以下逻辑卷：lvname=master,size=100Mlvname=sybproc,size=100Mlvname=sybsystem,size=100M(*)修改对应设备文件权限：#&chown&sybase:sybase&/dev/master&/dev/rmaster#&chown&sybase:sybase&/dev/sybproc&/dev/rsybproc#&chown&sybase:sybase&/dev/sybsystem&/dev/rsybsystem(*)#&chmod&600&/dev/master&/dev/rmaster&/dev/sybproc&/dev/rsybproc#&chmod&600&/dev/sybsystem&/dev/rsybsystem(*)2.&设置系统环境共享内存要求Platform&Number&of&2K&Pages&Amount&of&MemoryHP/UX&9,000&18&MBIBM&RS/&18&MB修改系统共享内存。异步I/O要求n&IBM&AIX激活异步I/O。#&smitty&chgaio如果系统同时有多于7个磁盘使用异步I/O，对于每个设备将参数MAXIMUM加1。SMIT&Parameters&Entry&Boxes&for&AIX&4.1.2MINIMUM&number&of&servers&1MAXIMUM&number&of&servers&10MAXIMUM&number&of&REQUESTS&I/O&4096Server&PRIORITY&39ASYNC&I/O&STATE&to&be&configured&at&system&restart&availablen&HP使用SAM。#&sam-&;Kernel&Configuration&menu----&;Drivers修改&Pending&State&for&asyncdisk为&In.----&;Actions&menu&--&;&rebuild&the&kernel--&;&reboot&the&system.&由于启动Adaptive&Server和&Backup&Server的用户sybase必须是&/dev/async的属主，执行以下命令：#&/etc/mknod&/dev/async&c&101&4#&chmod&0660&/dev/async#&chown&sybase&/dev/async修改系统参数(SCO&OPEN&SERVER&only)#&vi&/etc/conf/cf.d/stune加入以下行：SHMMAX&XXXXXXXX&(XXXXXXXX为最大共享内存，如64M为)NFILE&3000NOFILES&1024#&vi&/etc/conf/sdevice.d/aio将”N”改为”Y”。#&vi&/etc/conf/sdevice.d/suds将”N”改为”Y”。#&/etc/conf/cf.d/link_unix重链核心。#&vi&/etc/rc2加入行：/etc/suds_ctrl&-a&sybase组id号#&shutdown&-y&-i0&-g0&重新开机修改sybase用户的.profile编辑/sybase/.profile文件，如下：SYBASE=/sybaseDSQUERY=ABIS_SERVPATH=$PATH:.:.$SYBASE/bin:$SYBASE/installLIBPATH=$SYBASE/libexport&SYBASE&DSQUERY&PATH&LIBPATH也可以将这些环境变量的设置放在系统的环境设置文件中（如AIX的/etc/environment）。3.&创建SYBASE&SERVER对于SCO&OPEN&SERVER下的SQL&Server的创建，参见附录。假设SERVER名为ABIS_SERV。以sybase用户登录，或#&su&–&sybase$&cd&init$&cd&sample_resource_files$&cp&srvbuild.adaptive_server.rs&/sybase/ABIS_SERV.rs$&cp&srvbuild.backup_servers.rs&/sybase/ABIS_SERV_backup.rs$&cd修改资源定义文件$&vi&ABIS_SERV.rssybinit.release_directory:&/sybasesybinit.product:&sqlsrvsqlsrv.server_name:&ABIS_SERVsqlsrv.new_config:&yessqlsrv.do_add_server:&yessqlsrv.network_protocol_list:&tcpsqlsrv.network_hostname_list:&PUT_YOUR_HOSTNAME_HEREsqlsrv.network_port_list:&PUT_YOUR_PORT_NUMBER_HEREsqlsrv.master_device_physical_name:/dev/rmastersqlsrv.master_device_size:&100sqlsrv.master_database_size:&USE_DEFAULTsqlsrv.errorlog:&USE_DEFAULTsqlsrv.do_upgrade:&nosqlsrv.sybsystemprocs_device_physical_name:&/dev/rsybprocsqlsrv.sybsystemprocs_device_size:&100sqlsrv.sybsystemprocs_database_size:&USE_DEFAULTsqlsrv.sybsystemdb_device_physical_name:&/dev/rsybsystem(*)sqlsrv.sybsystemdb_device_size:&100(*)sqlsrv.sybsystemdb_database_size:&USE_DEFAULT(*)sqlsrv.default_backup_server:&ABIS_SERV_backup~~如果不使用两阶段提交(2pc)，可以不创建名为sybsystem的逻辑卷，同时删除以上文件中最后标有(*)的三行。$&vi&ABIS_SERV_backup.rssybinit.release_directory:&/sybasesybinit.product:&bsrvbsrv.server_name:&ABIS_SERV_backupbsrv.do_add_backup_server:&yesbsrv.network_protocol_list:&tcpbsrv.network_hostname_list:&PUT_YOUR_HOSTNAME_HEREbsrv.network_port_list:&PUT_YOUR_PORT_NUMBER_HEREbsrv.language:&USE_DEFAULTbsrv.character_set:&USE_DEFAULTbsrv.tape_config_file:&USE_DEFAULTbsrv.errorlog:&USE_DEFAULT~~~$&srvbuildres&–r&ABIS_SERV.rs$&srvbuildres&–r&ABIS_SERV_backup.rs如果是在HP-UX上，缺省的字符集roman8，通过以下方法改为iso_1。$&cd&/sybase$&cp&init/sample_resource_files/sqlloc.rs&sqlloc.rs$&vi&sqlloc.rssybinit.release_directory:&USE_DEFAULTsqlsrv.server_name:&ABIS_SERVsqlsrv.sa_login:&sasqlsrv.sa_password:sqlsrv.default_language:&us_englishsqlsrv.language_install_list:&USE_DEFAULTsqlsrv.language_remove_list:&USE_DEFAULTsqlsrv.default_characterset:&iso_1sqlsrv.characterset_install_list:&USE_DEFAULTsqlsrv.characterset_remove_list:&USE_DEFAULTsqlsrv.sort_order:&binary$&sqllocres&–r&sqlloc.rs4.&配置SYBASE&SERVER$&isql&-Usa&Password:1&;select&@@version2&;go1&;alter&database&master&on&master=25&扩大MASTER数据库2&;go1&;sp_helpdb查看数据库信息2&;go1&;sp_addserver&&SYB_BACKUP&,null,&ABIS_SERV_backup&建立BACKUPSERVER与DBSERVER的连接2&;go1&;sp_addserver&“ABIS_SERV”,local2&;go命名本服务器，需重启server1&;sp_helpserver2&;go1&;sp_configure&&total&memory&,358400为SYBASE指定其使用的内存(700M)，需重启动server2&;go1&;sp_configure&&user&connections&,100SYBASE可使用的用户连接2&;go1&;sp_password&NULL,”new_sa_password”&修改sa口令2&;go1&;sp_diskdefault&master,defaultoff&修改master设备的缺省状态2&;go1&;shutdown&SYB_BACKUP必须先shutdown&BACKUP&server2&;go1&;shutdown然后shutdown&DB&server2&;go5.&启动SYBASE&SERVER#&su&–&sybase$&cd&install$&startserver&-f&RUN_ABIS_SERV&启动server$&showserver&对应每个CPU有一个dataserver进程$&startserver&-f&RUN_ABIS_SERV_backup&启动backup-server6.&作系统数据库备份isql&-Usa1&;dump&database&master&to&&/sybase/install/master.dump&2&;go1&;dump&database&sybsystemprocs&to&&/sybase/install/sybprocs.dump&2&;go1&;quit7.&修改配置文件(Server)$&cd&/sybase$&vi&ABIS_SERV.cfg&该文件是该服务器的所有配置信息，可以直接修改此文件。修改配置文件后，最好使用以下命令进行检验修改是否正确：$&isql&–Usa&–SABIS_SERV&–P1&;sp_configure&&configuration&file&,&0,verify,&/sybase/ABIS_SERV.cfg&2&;go(return&status&=&0)1&;quit8.&修改配置文件(Client)根据需要，可能需要修改Open&Client的某些配置文件，才能正常使用应用程序。可能需要修改的有：l&$SYBASE/config/libtcl.cfg注释掉所有段如[drivers],[directory],[security]内的所有行。l&$SYBASE/config/ocs.cfg添加对应的server需要的段。l&$SYBASE/locales/locales.dat根据应用使用的LANG添加或修改对应该OS的段，对应该LANG的行的值。u&附录1.&在DS(DATA-SERVER)上安装的产品及顺序1.&Adattive&Server&Enterprise&11.9.22.&All&Server&product&Patch2.&在AS(APPLATION-SERVER)上安装的产品及顺序1.&ESQL/C2.&Open&Client/Server&C3.&XA&Library&for&CICS4.&All&Client&products&patchs3.&在BS(DS+AS)上安装的产品及顺序1.&ESQL/C2.&Open&Client/Server&C3.&XA&Library&for&CICS4.&All&Client&product&patchs5.&Adative&Server&Enterprise&11.9.26.&All&Server&product&Patch7.&other&patchs4.&在SCO&OPENSERVER上安装的产品及顺序1.&SQL&Server&11.0.32.&Open&Client/Server&C&10.0.43.&ESQL/C&10.0.44.&SQL&Server&patch&and&OCS&patch5.&在SCO&OPENSERVER上创建SQL&Serverl&以用户sybase登录，运行$SYBASE/install/sybinit。$&install/sybinitThe&log&file&for&this&session&is&'/sybase/init/logs/log'.SYBINIT1.&Release&directory:&/sybase2.&Edit&/&View&Interfaces&File3.&Configure&a&Server&product4.&Configure&an&Open&Client/Server&productCtrl-a&Accept&and&Continue,&Ctrl-x&Exit&Screen,&?&Help.Enter&the&number&of&your&choice&and&press&return:&2l&确认Release&directory是正确的。l&先配置server需要的interfaces项。INTERFACES&FILE&TOP&SCREENInterfaces&File:1.&Add&a&new&entry2.&Modify&an&existing&entry3.&View&an&existing&entry4.&Delete&an&existing&entryCtrl-a&Accept&and&Continue,&Ctrl-x&Exit&Screen,&?&Help.Enter&the&number&of&your&choice&and&press&return:&1CREATE&NEW&INTERFACES&FILE&ENTRY1.&Server&name:Ctrl-a&Accept&and&Continue,&Ctrl-x&Exit&Screen,&?&Help.Enter&the&number&of&your&choice&and&press&return:&1Enter&the&name&of&the&server&to&add&(default&is&'):MYSERVCREATE&NEW&INTERFACES&FILE&ENTRY1.&Server&name:&MYSERVCtrl-a&Accept&and&Continue,&Ctrl-x&Exit&Screen,&?&Help.Enter&the&number&of&your&choice&and&press&return:SERVER&INTERFACES&FILE&ENTRY&SCREENServer&name:&MYSERV1.&Retry&Count:&02.&Retry&Delay:&03.&Add&a&new&listener&serviceCtrl-a&Accept&and&Continue,&Ctrl-x&Exit&Screen,&?&Help.Enter&the&number&of&your&choice&and&press&return:&3EDIT&TCP&SERVICE1.&Hostname/Address:&2.&Port:3.&Name&Alias:4.&Delete&this&service&from&the&interfaces&entryCtrl-a&Accept&and&Continue,&Ctrl-x&Exit&Screen,&?&Help.Enter&the&number&of&your&choice&and&press&return:&1Enter&the&hostname&or&Internet&address&to&use&for&this&entry&(default&is&'caiabc.'):localhostEDIT&TCP&SERVICE1.&Hostname/Address:&localhost2.&Port:3.&Name&Alias:4.&Delete&this&service&from&the&interfaces&entryCtrl-a&Accept&and&Continue,&Ctrl-x&Exit&Screen,&?&Help.Enter&the&number&of&your&choice&and&press&return:&2Enter&the&port&number&to&use&for&this&entry&(default&is&'):2888EDIT&TCP&SERVICE1.&Hostname/Address:&localhost2.&Port:&28883.&Name&Alias:4.&Delete&this&service&from&the&interfaces&entryCtrl-a&Accept&and&Continue,&Ctrl-x&Exit&Screen,&?&Help.Enter&the&number&of&your&choice&and&press&return:Is&this&information&correct?&ySERVER&INTERFACES&FILE&ENTRY&SCREENServer&name:&MYSERV1.&Retry&Count:&02.&Retry&Delay:&03.&Add&a&new&listener&serviceModify&or&delete&a&serviceListener&services&available:Protocol&Address&Port&Name&Alias4.&tcp&localhost&2888Ctrl-a&Accept&and&Continue,&Ctrl-x&Exit&Screen,&?&Help.Enter&the&number&of&your&choice&and&press&return:Write&the&changes&to&the&interfaces&file&now?&yl&创建新的ServerSYBINIT1.&Release&directory:&/sybase2.&Edit&/&View&Interfaces&File3.&Configure&a&Server&product4.&Configure&an&Open&Client/Server&productCtrl-a&Accept&and&Continue,&Ctrl-x&Exit&Screen,&?&Help.Enter&the&number&of&your&choice&and&press&return:&3CONFIGURE&SERVER&PRODUCTSProducts:Product&Date&Installed&Date&Configured1.&SQL&Server&Oct&18&2.&Backup&Server&Oct&18&Ctrl-a&Accept&and&Continue,&Ctrl-x&Exit&Screen,&?&Help.Enter&the&number&of&your&choice&and&press&return:&1NEW&OR&EXISTING&SQL&SERVER1.&Configure&a&new&SQL&Server2.&Configure&an&existing&SQL&Server3.&Upgrade&an&existing&SQL&ServerCtrl-a&Accept&and&Continue,&Ctrl-x&Exit&Screen,&?&Help.Enter&the&number&of&your&choice&and&press&return:&1ADD&NEW&SQL&SERVER1.&SQL&Server&name:&SYBASECtrl-a&Accept&and&Continue,&Ctrl-x&Exit&Screen,&?&Help.Enter&the&number&of&your&choice&and&press&return:&1Enter&the&name&of&the&new&SQL&Server&(default&is&'SYBASE'):MYSERVADD&NEW&SQL&SERVER1.&SQL&Server&name:&MYSERVCtrl-a&Accept&and&Continue,&Ctrl-x&Exit&Screen,&?&Help.Enter&the&number&of&your&choice&and&press&return:SQL&SERVER&CONFIGURATION1.&CONFIGURE&SERVER'S&INTERFACES&FILE&ENTRY&Complete2.&MASTER&DEVICE&CONFIGURATION&Incomplete3.&SYBSYSTEMPROCS&DATABASE&CONFIGURATION&Incomplete4.&SET&ERRORLOG&LOCATION&Incomplete5.&CONFIGURE&DEFAULT&BACKUP&SERVER&Incomplete6.&CONFIGURE&LANGUAGES&Incomplete7.&CONFIGURE&CHARACTER&SETS&Incomplete8.&CONFIGURE&SORT&ORDER&Incomplete9.&ACTIVATE&AUDITING&IncompleteCtrl-a&Accept&and&Continue,&Ctrl-x&Exit&Screen,&?&Help.Enter&the&number&of&your&choice&and&press&return:&2MASTER&DEVICE&CONFIGURATION1.&Master&Device:&/sybase/master.dat2.&Size&(Meg):&21Ctrl-a&Accept&and&Continue,&Ctrl-x&Exit&Screen,&?&Help.Enter&the&number&of&your&choice&and&press&return:&1Enter&the&pathname&of&the&SQL&Server's&master&device&(default&is&'/sybase/master.dat'):/sybase/install/master.datWARNING:&'/sybase/install/master.dat'&is&a&regular&file&which&is&not&recommended&for&a&Server&device.Press&&return&;&to&continue.MASTER&DEVICE&CONFIGURATION1.&Master&Device:&/sybase/install/master.dat2.&Size&(Meg):&21Ctrl-a&Accept&and&Continue,&Ctrl-x&Exit&Screen,&?&Help.Enter&the&number&of&your&choice&and&press&return:&2Enter&the&size&of&the&SQL&Server's&master&device&in&megabytes:50MASTER&DEVICE&CONFIGURATION1.&Master&Device:&/sybase/install/master.dat2.&Size&(Meg):&50Ctrl-a&Accept&and&Continue,&Ctrl-x&Exit&Screen,&?&Help.Enter&the&number&of&your&choice&and&press&return:SQL&SERVER&CONFIGURATION1.&CONFIGURE&SERVER'S&INTERFACES&FILE&ENTRY&Complete2.&MASTER&DEVICE&CONFIGURATION&Complete3.&SYBSYSTEMPROCS&DATABASE&CONFIGURATION&Incomplete4.&SET&ERRORLOG&LOCATION&Incomplete5.&CONFIGURE&DEFAULT&BACKUP&SERVER&Incomplete6.&CONFIGURE&LANGUAGES&Incomplete7.&CONFIGURE&CHARACTER&SETS&Incomplete8.&CONFIGURE&SORT&ORDER&Incomplete9.&ACTIVATE&AUDITING&IncompleteCtrl-a&Accept&and&Continue,&Ctrl-x&Exit&Screen,&?&Help.Enter&the&number&of&your&choice&and&press&return:&3SYBSYSTEMPROCS&DATABASE&CONFIGURATION1.&sybsystemprocs&database&size&(Meg):&162.&sybsystemprocs&logical&device&name:&sysprocsdev3.&create&new&device&for&the&sybsystemprocs&database:&yes4.&physical&name&of&new&device:&/sybase/sybprocs.dat5.&size&of&the&new&device&(Meg):&16Ctrl-a&Accept&and&Continue,&Ctrl-x&Exit&Screen,&?&Help.Enter&the&number&of&your&choice&and&press&return:&4Enter&the&physical&device&name&for&the&sybsystemprocs&database&:/sybase/install/sybprocs.datSYBSYSTEMPROCS&DATABASE&CONFIGURATION1.&sybsystemprocs&database&size&(Meg):&162.&sybsystemprocs&logical&device&name:&sysprocsdev3.&create&new&device&for&the&sybsystemprocs&database:&yes4.&physical&name&of&new&device:&/sybase/install/sybprocs.dat5.&size&of&the&new&device&(Meg):&16Ctrl-a&Accept&and&Continue,&Ctrl-x&Exit&Screen,&?&Help.Enter&the&number&of&your&choice&and&press&return:SQL&SERVER&CONFIGURATION1.&CONFIGURE&SERVER'S&INTERFACES&FILE&ENTRY&Complete2.&MASTER&DEVICE&CONFIGURATION&Complete3.&SYBSYSTEMPROCS&DATABASE&CONFIGURATION&Complete4.&SET&ERRORLOG&LOCATION&Incomplete5.&CONFIGURE&DEFAULT&BACKUP&SERVER&Incomplete6.&CONFIGURE&LANGUAGES&Incomplete7.&CONFIGURE&CHARACTER&SETS&Incomplete8.&CONFIGURE&SORT&ORDER&Incomplete9.&ACTIVATE&AUDITING&IncompleteCtrl-a&Accept&and&Continue,&Ctrl-x&Exit&Screen,&?&Help.Enter&the&number&of&your&choice&and&press&return:&4SET&ERRORLOG&LOCATION1.&SQL&Server&errorlog:&/sybase/install/errorlogCtrl-a&Accept&and&Continue,&Ctrl-x&Exit&Screen,&?&Help.Enter&the&number&of&your&choice&and&press&return:SQL&SERVER&CONFIGURATION1.&CONFIGURE&SERVER'S&INTERFACES&FILE&ENTRY&Complete2.&MASTER&DEVICE&CONFIGURATION&Complete3.&SYBSYSTEMPROCS&DATABASE&CONFIGURATION&Complete4.&SET&ERRORLOG&LOCATION&Complete5.&CONFIGURE&DEFAULT&BACKUP&SERVER&Incomplete6.&CONFIGURE&LANGUAGES&Incomplete7.&CONFIGURE&CHARACTER&SETS&Incomplete8.&CONFIGURE&SORT&ORDER&Incomplete9.&ACTIVATE&AUDITING&IncompleteCtrl-a&Accept&and&Continue,&Ctrl-x&Exit&Screen,&?&Help.Enter&the&number&of&your&choice&and&press&return:&5SET&THE&SQL&SERVER'S&BACKUP&SERVER1.&SQL&Server&Backup&Server&name:&SYB_BACKUPCtrl-a&Accept&and&Continue,&Ctrl-x&Exit&Screen,&?&Help.Enter&the&number&of&your&choice&and&press&return:SQL&SERVER&CONFIGURATION1.&CONFIGURE&SERVER'S&INTERFACES&FILE&ENTRY&Complete2.&MASTER&DEVICE&CONFIGURATION&Complete3.&SYBSYSTEMPROCS&DATABASE&CONFIGURATION&Complete4.&SET&ERRORLOG&LOCATION&Complete5.&CONFIGURE&DEFAULT&BACKUP&SERVER&Complete6.&CONFIGURE&LANGUAGES&Incomplete7.&CONFIGURE&CHARACTER&SETS&Incomplete8.&CONFIGURE&SORT&ORDER&Incomplete9.&ACTIVATE&AUDITING&IncompleteCtrl-a&Accept&and&Continue,&Ctrl-x&Exit&Screen,&?&Help.Enter&the&number&of&your&choice&and&press&return:&6CONFIGURE&LANGUAGESCurrent&default&language:&us_englishCurrent&default&character&set:&ISO&8859-1&(Latin-1)&-&Western&European&8-bit&character&set.Current&sort&order:&Binary&ordering,&for&the&ISO&8859/1&or&Latin-1&character(iso_1).Select&the&language&you&want&to&install,&remove,&or&designate&as&the&default&language.Language&Installed?&Remove&Install&Make&default1.&us_english&yes&no&no&yesCtrl-a&Accept&and&Continue,&Ctrl-x&Exit&Screen,&?&Help.Enter&the&number&of&your&choice&and&press&return:SQL&SERVER&CONFIGURATION1.&CONFIGURE&SERVER'S&INTERFACES&FILE&ENTRY&Complete2.&MASTER&DEVICE&CONFIGURATION&Complete3.&SYBSYSTEMPROCS&DATABASE&CONFIGURATION&Complete4.&SET&ERRORLOG&LOCATION&Complete5.&CONFIGURE&DEFAULT&BACKUP&SERVER&Complete6.&CONFIGURE&LANGUAGES&Complete7.&CONFIGURE&CHARACTER&SETS&Incomplete8.&CONFIGURE&SORT&ORDER&Incomplete9.&ACTIVATE&AUDITING&IncompleteCtrl-a&Accept&and&Continue,&Ctrl-x&Exit&Screen,&?&Help.Enter&the&number&of&your&choice&and&press&return:&7CONFIGURE&CHARACTER&SETSCurrent&default&language:&us_englishCurrent&default&character&set:&ISO&8859-1&(Latin-1)&-&Western&European&8-b&character&set.Current&sort&order:&Binary&ordering,&for&the&ISO&8859/1&or&Latin-1&charact(iso_1).Select&the&character&set&you&want&to&install,&remove,&or&designate&as&the&defaulset.aracterCharacter&set&Installed?&Remove&Install&Make&default1.&ASCII,&for&use&with&unsp&yes&no&no&no2.&Code&Page&437,&(United&S&no&no&no&no3.&Code&Page&850&(Multiling&no&no&no&no4.&ISO&8859-1&(Latin-1)&-&W&yes&no&no&yes5.&Macintosh&default&charac&no&no&no&no6.&Hewlett-Packard&propriet&no&no&no&noCtrl-a&Accept&and&Continue,&Ctrl-x&Exit&Screen,&?&Help.Enter&the&number&of&your&choice&and&press&return:SQL&SERVER&CONFIGURATION1.&CONFIGURE&SERVER'S&INTERFACES&FILE&ENTRY&Complete2.&MASTER&DEVICE&CONFIGURATION&Complete3.&SYBSYSTEMPROCS&DATABASE&CONFIGURATION&Complete4.&SET&ERRORLOG&LOCATION&Complete5.&CONFIGURE&DEFAULT&BACKUP&SERVER&Complete6.&CONFIGURE&LANGUAGES&Complete7.&CONFIGURE&CHARACTER&SETS&Complete8.&CONFIGURE&SORT&ORDER&Incomplete9.&ACTIVATE&AUDITING&IncompleteCtrl-a&Accept&and&Continue,&Ctrl-x&Exit&Screen,&?&Help.Enter&the&number&of&your&choice&and&press&return:&8CONFIGURE&SORT&ORDERCurrent&default&language:&us_englishCurrent&default&character&set:&ISO&8859-1&(Latin-1)&-&Western&European&8-bcharacter&set.Current&sort&order:&Binary&ordering,&for&the&ISO&8859/1&or&Latin-1&charact(iso_1).Select&a&sort&order.Sort&Order&Chosen1.&Binary&ordering,&for&the&ISO&8859/1&or&Latin-1&character&set&(is&yes2.&General&purpose&dictionary&ordering.&no3.&Spanish&dictionary&ordering.&no4.&Spanish&case&and&accent&insensitive&dictionary&order.&no5.&Spanish&case&insensitive&dictionary&order.&no6.&Dictionary&order,&case&insensitive,&accent&insensitive.&no7.&Dictionary&order,&case&insensitive.&no8.&Dictionary&order,&case&insensitive&with&preference.&noCtrl-a&Accept&and&Continue,&Ctrl-x&Exit&Screen,&?&Help.Enter&the&number&of&your&choice&and&press&return:SQL&SERVER&CONFIGURATION1.&CONFIGURE&SERVER'S&INTERFACES&FILE&ENTRY&Complete2.&MASTER&DEVICE&CONFIGURATION&Complete3.&SYBSYSTEMPROCS&DATABASE&CONFIGURATION&Complete4.&SET&ERRORLOG&LOCATION&Complete5.&CONFIGURE&DEFAULT&BACKUP&SERVER&Complete6.&CONFIGURE&LANGUAGES&Complete7.&CONFIGURE&CHARACTER&SETS&Complete8.&CONFIGURE&SORT&ORDER&Complete9.&ACTIVATE&AUDITING&IncompleteCtrl-a&Accept&and&Continue,&Ctrl-x&Exit&Screen,&?&Help.Enter&the&number&of&your&choice&and&press&return:&9ACTIVATE&AUDITING1.&Install&auditing:&no2.&sybsecurity&database&size&(Meg):&53.&sybsecurity&logical&device&name:&sybsecurity4.&create&new&device&for&the&sybsecurity&database:&noCtrl-a&Accept&and&Continue,&Ctrl-x&Exit&Screen,&?&Help.Enter&the&number&of&your&choice&and&press&return:SQL&SERVER&CONFIGURATIONSQL&SERVER&CONFIGURATION1.&CONFIGURE&SERVER'S&INTERFACES&FILE&ENTRY&Complete2.&MASTER&DEVICE&CONFIGURATION&Complete3.&SYBSYSTEMPROCS&DATABASE&CONFIGURATION&Complete4.&SET&ERRORLOG&LOCATION&Complete5.&CONFIGURE&DEFAULT&BACKUP&SERVER&Complete6.&CONFIGURE&LANGUAGES&Complete7.&CONFIGURE&CHARACTER&SETS&Complete8.&CONFIGURE&SORT&ORDER&Complete9.&ACTIVATE&AUDITING&CompleteCtrl-a&Accept&and&Continue,&Ctrl-x&Exit&Screen,&?&Help.Enter&the&number&of&your&choice&and&press&return:Execute&the&SQL&Server&Configuration&now?&yWARNING:&'/sybase/install/master.dat'&is&a&regular&file&which&is&not&recommendedfor&a&Server&device.Press&&return&;&to&continue.Running&task:&create&the&master&device.Building&the&master&device.DoneTask&succeeded:&create&the&master&device.Running&task:&update&the&SQL&Server&runserver&file.Task&succeeded:&update&the&SQL&Server&runserver&file.Running&task:&boot&the&SQL&Server.waiting&for&server&'MYSERV'&to&boot...Task&succeeded:&boot&the&SQL&Server.Running&task:&create&the&sybsystemprocs&database.sybsystemprocs&database&created.Task&succeeded:&create&the&sybsystemprocs&database.Running&task:&install&system&stored&procedures......................................................................................................................DoneTask&succeeded:&install&system&stored&procedures.Running&task:&set&permissions&for&the&'model'&database.DoneTask&succeeded:&set&permissions&for&the&'model'&database.Running&task:&set&the&default&character&set&and/or&default&sort&order&for&the&SQL&Server.Setting&the&default&character&set&to&iso_1Sort&order&'binary'&has&already&been&installed.Character&set&'iso_1'&is&already&the&default.Sort&order&'binary'&is&already&the&default.Task&succeeded:&set&the&default&character&set&and/or&default&sort&order&for&theSQL&Server.Running&task:&set&the&default&language.Setting&the&default&language&to&us_englishLanguage&'us_english'&is&already&the&default.Task&succeeded:&set&the&default&language.Configuration&completed&successfully.Press&&return&;&to&continue.l&相同的方法配置BACKUP&Server
& 回复于： 09:37:13
& 回复于： 11:23:49
有没有关于SySAM的内容啊！贴出来共享一下。谢了
& 回复于： 18:05:11
原文链接：
转载请注明作者名及原文出处