求SAE标准-学网-中国IT综合门户网站-提供健康,养生,留学,移民,创业,汽车等信息
> 信息中心 >
来源：互联网 发表时间： 12:38:24 责任编辑：鲁晓倩字体：
为了帮助网友解决“求SAE标准”相关的问题，学网通过互联网对“求SAE标准”相关的解决方案进行了整理,用户详细问题包括:
求一份SAE 12L14 STEEL的标准！
，具体解决方案如下：解决方案1： 附.7 通用规范 合计 25 185.98 5 SAE J191 动力转向压力软管――低膨胀型 .26 8 SAE J1662 致冷剂改型对于空调系统材料的兼容性 .39 11 SAE J30 燃料及油软管 .67 13 SAE J2050 高温动力转向压力软管 ，是生产工艺.39 4 SAE J1401 公路车辆――采用非石油基液压液体的液压软管总成 .7 9 SAE J51 致冷剂12汽车空调系统软管 .47 4 SAE J188 动力转向回流软管――高膨胀型 .3 8 SAE J1405 液压软管总成可选脉冲试验程序
2.66 5 SAE J1037 挡风玻璃喷洗器软管 .81 6 SAE J1527 船用燃油软管
5、发动机润滑油软管，只有通过这道工艺才能保证管子的表面光滑.97 6 SAE J1661 CFC-12（R-12）汽车空调系统至HFC-134a（R -134a）改型程序 ： SAE标准目录 编号 名称 修订日期 字数(千字) 页数 备注 SAE J1019 高温输油软管.29 6 SAE J190 动力转向压力软管――钢丝编织型 .3 17 SAE J1273 液压软管总成推荐操作规程 .6 14 SAE J1288 液压制动软管总成的包装.8 7 SAE J1406 液压制动软管在机动车辆上的应用 .07 6 SAE J20 冷却剂系统软管 。 目前一般工厂都是采用包铅的.83 45 SAE J343 SAE 100R系列液压软管及软管总成试验及试验程序 ：规定了市场上销售的汽车配件（SAE认证）的标准，因为包塑的工艺并不是很成熟.93 5 SAE J1183 弹性材料及部件的疲劳试验推荐指南 .6 10 SAE J1570 液压盘式制动活塞橡胶防尘套
3.4 6 SAE Ja制冷剂汽车空调软管 SAE认证(美国机动车工程师学会) 美国机动车工程师学会（SAE）的认证.05 2 SAE J517 液压软管 .7 SAE J1403 真空制动软管 、以及软管总成试验及程序
2. 至于包铅和包塑.69 8 SAE J51附表 1.4 6 SAE J1873 传输所含水分试验程序――液压制动软管总成 .26 6 SAE J189 动力转向回流软管――低压 、贮存和贮存期
相关文章：
最新添加资讯
24小时热门资讯
Copyright © 2004- All Rights Reserved. 学网 版权所有
京ICP备号-1 京公网安备02号SAE标准中文版_美国汽车工程师协会标准中文版目录 -博泰典藏网
典藏文档　篇篇精品
SAE标准中文版_美国汽车工程师协会标准中文版目录
导读：1034.SAEJ汽车丙烯氰-丁二烯-苯乙烯（ABS）和ABS，1035.SAEJ汽车工业用机床及设备上动力单元，1041.SAEJ标准燃油滤清器试验液，1054.SAEJ重型汽车用微机系统串行数据通讯，1056.SAEJ混合动力汽车燃料经济性和排放污染物检测推荐规，1059.SAEJ汽
阀槽信息报告
SAE 1708 通讯用 DOS 界面
评价冷却系统软管及材料电化学阻力试验方法
汽车丙烯氰-丁二烯-苯乙烯（ABS）和ABS+聚碳酸脂合 成基塑料的分类系统
汽车工业用机床及设备上动力单元
机动车塑料安全玻璃――公差和装配细节
阀座信息报告
再生产的机动车制动器液压主缸――一般特性和试验规
再生产的机动车制动器液压主缸――性能要求
标准燃油滤清器试验液
设计和评价乘用车和轻型货车冷却管夹推荐规程
SAE J1850 确认试验规程
OBD-II相关 SAE 技术试验规程
内施粘合剂软化点
英制紧固件拧紧力矩
米制紧固件拧紧力矩
自行式清扫机清扫性能
机动车制动液
硼酸酯基制动液
低耐水性制动液
SAE J1703机动车制动液生产、管理及分配
制动系统中 SAE J1703制动液使用保养
重型汽车用微机系统串行数据通讯
欧洲制动液技术
混合动力汽车燃料经济性和排放污染物检测推荐规程
乘用车和货车盘式制动器结构试验
电动车术语
汽车内部塑料部件试验
电动乘用车和轻型货车在充电过程中氢气排放检测
过充电试验标准
为满足残疾人要求对私家车进行的改造
空气制冷机内部清洁
伤害计算指南
商用车驻车制动牵引杆试验规程
ABS 激励回路位置
载货车和客车导向轴承
汽车空调系统HFC-134a制冷剂收回装置
汽车碰撞试验用符号
汽车大灯性能要求
设计和制造装配过程中潜在失效模式及影响分析手册
预备报警系统
车载高压电线连接试验方法和一般性能要求
280 继电器插头
ISP 汽车定位参考标准
汽油/甲烷混合燃料腐蚀试验推荐规程
确定在石油/氧气混合燃料中聚合材料的物理特性
货车驾驶员视野环境的描述和评估
汽车工业用机床和设备润滑件和系统
集成电路电磁兼容性试验规程――一般要求和定义
集成电路电磁兼容性试验规程――集成电路辐射测量规程1MHz~1000 MHz，磁场回路探棒
集成电路电磁兼容性试验规程――集成电路点辐射测量规程（150Hz~1000 MHz TEM试验室）
最大工作压力 21Mpa的液压橡胶软管总成规程文件
工作压力 21Mpa，开口 30°的内螺纹液压橡胶软管总成 1085.
汽车外部光亮装饰件用不锈钢及合金应用指南
确定汽车内饰材料失去光泽的特性的试验程序
车站术语标准
SAE 软管检测研究
数据安全性
SAE 小电珠振动试验
电动和混合电动汽车电池系统碰撞整体性推荐规程
汽车内饰材料保色型的色差测量
用于R12和R134a 的制冷剂的回收利用
汽车空调系统制冷基标识设备的标准
SAE 电动汽车传导充电系统连接
SAE 电动汽车耦合充电系统连接
液压阀选择
SAE 约束系统试验规程
光谱传输试验
电动汽车电池模块包推荐规程
电动汽车电池模块性能推荐规程
汽车密封件可涂性评估方法
制动蹄片制动有效性标记
制动蹄片制动有效性评价
部件技术条件
座椅安全带术语
顶蓬式车辆腐蚀防护――防腐化合物
货车和客车离合器尺寸
夜里助动制动器调压器试验规程
制动器真空助理器试验规程
电气标识系统技术条件
动力线端子
EMC防电磁骚扰分级规定
非道路机械操作者控制件
长行程空气制动器主动器标记
机动车儿童约束系统安全性
液力制动部件贮存
涡轮增压机气体台架试验规程
碰撞维修用同一基准和尺寸指南
汽车燃料理论空燃比
喷丸用陶瓷丸的尺寸分级和特性
汽油低压燃油喷射器
座椅安全带的舒适性、适应性和方便性
可拆卸式轮辋车轮的紧固件
汽车车窗玻璃密封材料密封胶粘接力剪切试验
锌基材料外部镀铬的电镀性能
油水混合物中大水滴分离的试验规程
车轴轴端标准化
中型和重型车辆电控用加速踏板位置传感器
摩托车侧支撑收回性能试验地面特性
汽车外部图示和装饰带抗磨损性试验
急救车报警器
B 级数据通讯网络接口
金属粘接剂感应硫化试验
手动铰盘――小船挂车
商用车制动力分配性能指南 汽车改造用气囊电力分配
货车和客车用飞轮尺寸
确定气制动阀输入-输出特性试验规程
气制动阀输入-输出特性标记
气制动阀输入-输出特性要求
燃油喷射系统燃油压力调节器
客车连接面断裂
评估静压条件下汽车密封材料分离性的方法
商用和车轮安装尺寸
选择合金钢限定硬度带
液压制动管总成湿度传输试验规程
真空助力系统塑料单向阀材料
液压盘式制动器塑料防尘罩
VIN 标签条形码推荐规程
汽车用集成电路一般要求和产品认可标准
弹性轴套“TRAC”应用规范
汽车起重机性能要求和试验规程
用可控制不发光的水冷氙弧灯进行汽车内饰件的快速暴露试验 汽车石墨铸铁
L.E.D 照明装备
液力操纵齿轮齿条转向齿轮再生产性能保证
汽车排放构造标示条形码推荐规程
润滑油，活塞式航空发动机（无灰分散剂）
汽车驾驶员控制手册
汽车玻璃密封橡胶材料与玻璃的剥离试验
电气接地方法
高速公路车辆储气能力试验规程
手动变速器离合器总成再生产推荐规程
发动机水泵再生产规程和接受标准
汽车密封件膨胀率和吸水性确定法
用于中型和重型公路用柴油车电控传动接口
SAE J 3/ISO11926-1 带有 ISO 725 螺纹及 O型密封圈的通用及液压孔用以及轴端用连接件――第 1 部分：斜截式外壳带 O 型密封圈的螺纹孔
SAE J 3/ISO11926-2 带有 ISO 725 螺纹及 O型密封圈的通用及液压孔用以及轴端用连接件――第 2 部分：重型轴端（S 系列）
SAE J 3/ISO11926-3 带有ISO 725 螺纹及 O型密封圈的通用及液压孔用以及轴端用连接件――第 3部分：轻型轴端（L系列）
液压软管总成疲劳试验
船用汽油发动机中提供回火火花控制的装置
电子/电气系统诊断系统术语、定义、缩写词及缩略语
车辆电子系统设计和过程检查单 小型发动机功率和额定扭矩规程
重型车发动机制冷剂浓度
船用软管及软管总成
合格的船用软管
多用途货车和客车风窗清洗系统
T 型扣齿接合法兰
A 型（外部先导型） ，B 型（内部先导型）接合法兰
驾驶室睡觉乘客约束系统
道路车辆――60°锥座的高压燃油喷射管端部连接
在试验场上的车辆腐蚀试验
全轮驱动系统分类
毂式或盘式制动器驱动器制动行程指示器设计指南
总宽小于2032mm的车辆使用中央高位制动灯标准
柴油机――钢制高压燃油喷射管
防腐化合物，车辆底板的防腐
用受控的不发光的水冷氙弧灯进行汽车外部材料的快速暴露试验
用太阳能菲涅尔反光一起进行的汽车外部材料的快速暴
诊断线接头
道路车辆――商用车和多用途乘用车车轮的安装螺母――试验方法
飞机活塞式发动机用润滑油
汽车装饰用反射材料
汽车密封件的电泳适应性
海岸线声级测量规程
汽车装饰用阳极电镀技术要求
渗碳钢渗碳层硬度
外部材料的室外风蚀试验
橡胶轮胎自驱动的起重机制动性能
OBDII型扫描机
E/E 诊断试验模态
车辆乘员位置不正是与展开的气囊相互干涉的评价导则
车轮及轮胎总成道路碰撞试验（乘用车、轻型货车和多用途车） 乘用车、轻型货车和多用途汽车车轮术语
28型柴油燃料喷射总成
燃油滤清气――首次单向通过效率试验方法
平衡配重及轮辋法兰设计要求，试验规程和性能推荐规程
力及扭矩试验方法
残余对中试验 CFC-12 容器的使用推荐规程
车用空调系统回收再利用
车用空调系统用纯度标准
军用车车轮/轮辋试验规程和性能要求
高碳硬砂砾
车辆及工业用热交换装置热交换性能的实验室检测
发动机功率试验规范――点火式及压燃式――总功率评定
内燃机――活塞环――质量要求
内燃机――活塞环――矩形环
内燃机――活塞环――窄型矩形环
内燃机――活塞环――刮油环
内燃机――活塞环――楔形环
内燃机――活塞环――半楔形环
内燃机――活塞环―油控环
内燃机――活塞环―弹簧加载的油控环
内燃机――活塞环―涨圈/扇形控油环
娱乐用机动船静置声级测量
机动船排气软管
前方照明装置放电
诊断故障代码定义
军用轮胎术语
军用战术车辆用气压轮胎
聚合物抵抗化学应力性能
用受控的不发光的水冷氙弧灯进行汽车外部材料的快速暴露试验 用太阳能菲涅尔反光一起进行的汽车外部材料的快速暴露试验
分类土方机械分类、术语规格定义
包含总结汇报、出国留学、高中教育、教学研究、高等教育、经管营销、工程科技、行业论文以及SAE标准中文版_美国汽车工程师协会标准中文版目录 等内容。本文共7页
相关内容搜索SAE 美国机动工程师协会标准19
世界标准文献服务中心（北京京诚勃兴科技中心）
国内外标准数据库：http://www.bxkj-standards.org/standards/index.htm
电 话：010-
传 真：010-&&
SAE-J (R) RECOMMENDED PRACTICE FOR A SERIAL CONTROL AND COMMUNICATIONS VEHICLE NETWORK
SAE-J4 OFF-BOARD DIAGNOSTIC CONNECTOR
SAE-J4 NETWORK LAYER
SAE-J4 APPLICATION LAYER - DIAGNOSTICS
SAE-J4 APPLICATIONCONFIGURABLE MESSAGING
SAE-J3 REDUCED PHYSICAL LAYER, 250K BITS/SEC, UN-SHIELDED TWISTED PAIR (UTP)
SAE-J3 NETWORK MANAGEMENT
SAE-J2 APPLICATION LAYERGENERATOR SETS AND INDUSTRIAL
SAE-J1 DATA LINK LAYER
SAE-J0 RECOMMENDED PRACTICE FOR CONTROL AND COMMUNICATION NEWTWORK FOR ON-HIGHWAY EQUIPMENT
SAE-J9 PHYSICAL LAYER, 250K BITS/S, TWISTED SHIELDED PAIR
SAE-J (R) SMALL ENGINE POWER AND TORQUE RATING PROCEDURE
SAE-J COOLANT CONCENTRATE (LOW SILICATE, ETHYLENE GLYCOL TYPE REQUIRING AN INITIAL CHARGE OF SUPPLEMENTAL COOLANT ADDITIVE) FOR HEAVY-DUTY ENGINES
SAE-J5 QUALIFIED HOSES FOR MARINE APPLICATIONS
SAE-J HOSE AND HOSE ASSEMBLIES FOR MARINE APPLICATIONS
SAE-J TRUCK AND BUS MULTIPURPOSE VEHICLE WINDSHIELD WASHER SYSTEM
SAE-J CROSS-TOOTH COMPANION FLANGES, TYPE T
SAE-J COMPANION FLANGES, TYPE A (EXTERNAL PILOT) AND TYPE S (INTERNAL PILOT)
SAE-J CAB SLEEPER OCCUPANT RESTRAINT SYSTEM TEST
SAE-J ROAD VEHICLES - HIGH PRESSURE FUEL INJECTION PIPE END-CONNECTIONS WITH 60 DEGREE FEMALE CONE, STANDARD; - OCTOBER 1988 (ISO/DIS 2974)
SAE-J PROVING GROUND VEHICLE CORROSION TESTING, INFORMATION REPORT - MAY 1989
SAE-J (R) ALL-WHEEL DRIVE SYSTEMS CLASSIFICATION
SAE-J BRAKE-STROKE INDICATOR DESIGN GUIDELINE FOR CAM OR DISC AIR-BRAKE ACTUATORS
SAE-J (R) CENTER HIGH MOUNTED STOP LAMP STANDARD FOR VEHICLES LESS THAN 2032 MM OVERALL WIDTH
SAE-J DIESEL ENGINES - STEEL TUBES FOR HIGH-PRESSURE FUEL INJECTION PIPES (TUBING)
SAE-J CORROSION PREVENTIVE COMPOUND, UNDERBODY VEHICLE CORROSION PROTECTION - SUPERSEDING J1969 JUN1998
SAE-J ACCELERATED EXPOSURE OF AUTOMOTIVE EXTERIOR MATERIALS USING A CONTROLLED IRRADIANCE WATER-COOLED XENON ARC APPARATUS
SAE-J (R) ACCELERATED EXPOSURE OF AUTOMOTIVE EXTERIOR MATERIALS USING A SOLAR FRESNEL REFLECTOR APPARATUS
SAE-J (R) DIAGNOSTIC CONNECTOR EQUIVALENT TO ISO/DIS 15031-3:DECEMBER 14, 2001
SAE-J ROAD VEHICLES - WHEELS FOR COMMERCIAL VEHICLES AND MULTIPURPOSE PASSENGER VEHICLES - FIXING NUTS - TEST METHODS
SAE-J LUBRICATING OILS, AIRCRAFT PISTON ENGINE (NON-DISPERSANT MINERAL OIL)
SAE-J RETROREFLECTIVE MATERIALS FOR VEHICLE CONSPICUITY
SAE-J ELECTROCOAT COMPATIBILITIES OF AUTOMOTIVE SEALERS, RECOMMENDED PRACTICE - OCTOBER 1988
SAE-J SHORELINE SOUND LEVEL MEASUREMENT PROCEDURE FOR RECREATIONAL MOTORBOATS
SAE-J PERSONAL WATERCRAFT - FLOTATION, RECOMMENDED PRACTICE - APRIL 1991
SAE-J DECORATIVE ANODIZING SPECIFICATION FOR AUTOMOTIVE APPLICATIONS, RECOMMENDED PRACTICE - JUNE 1993
SAE-J CASE HARDENABILITY OF CARBURIZED STEELS
SAE-J (R) OUTDOOR WEATHERING OF EXTERIOR MATERIALS
SAE-J BRAKING PERFORMANCE - RUBBER-TIRED, SELF-PROPELLED CRANES
SAE-J OBD II SCAN TOOL EQUIVALENT TO ISO/DIS 15031-4:DECEMBER 14, 2001
SAE-J (R) E/E DIAGNOSTIC TEST MODES EQUIVALENT TO ISO/DIS 15031-5:APRIL 30, 2002
SAE-J (R) GUIDELINES FOR EVALUATING OUT-OF-POSITION VEHICLE OCCUPANT INTERACTIONS WITH DEPLOYING AIRBAGS
SAE-J ROAD HAZARD IMPACT TEST FOR WHEEL AND TIRE ASSEMBLIES (PASSENGER CAR, LIGHT TRUCK, AND MULTIPURPOSE VEHICLES)
SAE-J (R) NOMENCLATURE - WHEELS FOR PASSENGER CARS, LIGHT TRUCKS, AND MULTIPURPOSE VEHICLES
SAE-J DIESEL FUEL INJECTOR ASSEMBLY TYPE 28 (9.5 MM) - (THIS DOCUMENT REFERENCES ISO 2698)
SAE-J FUEL FILTERS - INITIAL SINGLE-PASS EFFICIENCY TEST METHOD, STANDARD - OCTOBER 1993
SAE-J BALANCE WEIGHT AND RIM FLANGE DESIGN SPECIFICATIONS, TEST PROCEDURES, AND PERFORMANCE RECOMMENDATIONS
SAE-J FORCE AND MOVEMENT TEST METHOD
SAE-J RESIDUAL ALIGNING MOMENT TEST, RECOMMENDED PRACTICE - AUGUST 1994
SAE-J RECOMMENDED SERVICE PROCEDURE FOR THE CONTAINMENT OF CFC-12 (R-12)
SAE-J RECOVERY AND RECYCLE EQUIPMENT FOR MOBILE AUTOMOTIVE AIR-CONDITIONING SYSTEMS
SAE-J STANDARD OF PURITY FOR USE IN MOBILE AIR-CONDITIONING SYSTEMS - OCTOBER 1989
SAE-J (R) WHEELS/RIMS - MILITARY VEHICLES - TEST PROCEDURES AND PERFORMANCE REQUIREMENTS
SAE-J HIGH-CARBON CAST-STEEL GRIT
SAE-J LABORATORY TESTING OF VEHICLE AND INDUSTRIAL HEAT EXCHANGERS FOR HEAT TRANSFER PERFORMANCE
SAE-J ENGINE POWER TEST CODE - SPARK IGNITION AND COMPRESSION IGNITION - GROSS POWER RATING, STANDARD;
SAE-J INTERNAL COMBUSTION ENGINES - PISTON RINGS - QUALITY REQUIREMENTS
SAE-J INTERNAL COMBUSTION ENGINES - PISTON RINGS - RECTANGULAR RINGS
SAE-J INTERNAL COMBUSTION ENGINES - PISTON RINGS - RECTANGULAR RINGS WITH NARROW RING WIDTH
SAE-J INTERNAL COMBUSTION ENGINES - PISTON RINGS - SCRAPER RINGS
SAE-J INTERNAL COMBUSTION ENGINES - PISTON RINGS - KEYSTONE RINGS
SAE-J INTERNAL COMBUSTION ENGINES - PISTON RINGS - HALF KEYSTONE RINGS
SAE-J INTERNAL COMBUSTION ENGINES - PISTON RINGS - OIL CONTROL RINGS
SAE-J INTERNAL COMBUSTION ENGINES - PISTON RINGS COIL SPRING LOADED OIL CONTROL RINGS
SAE-J INTERNAL COMBUSTION ENGINES - PISTON RINGS - EXPANDER/SEGMENT OIL CONTROL RINGS
SAE-J STATIONARY SOUND LEVEL MEASUREMENT PROCEDURE FOR RECREATIONAL MOTORBOATS
SAE-J MARINE EXHAUST HOSE
SAE-J ELECTRONIC PRODUCT - PLEASE REFER TO GLOBAL
SAE-J (R) DISCHARGE FORWARD LIGHTING SYSTEM AND SUBSYSTEMS
SAE-J (R) DIAGNOSTIC TROUBLE CODE DEFINITIONS EQUIVALENT TO ISO/DIS 15031-6:APRIL 30, 2002
SAE-J MILITARY TIRE GLOSSARY, RECOMMENDED PRACTICE - MAY 1991
SAE-J (R) PNEUMATIC TIRES FOR MILITARY TACTICAL WHEELED VEHICLES - FSC 2610
SAE-J (R) CHEMICAL STRESS RESISTANCE OF POLYMERS
SAE-J (R) GUIDELINES FOR THE DEVELOPMENT OF PERFORMANCE-BASED TECHNICIAN TRAINING PROGRAMS, RECOMMENDED PRACTICE - JULY 1995
SAE-J ASSESSING TECHNICIAN TRAINING, RECOMMENDED PRACTICE - JULY 1989
SAE-J ACCELERATED EXPOSURE OF AUTOMOTIVE EXTERIOR MATERIALS USING A CONTROLLED IRRADIANCE AIR-COOLED XENON-ARC APPARATUS, STANDARD - JANUARY 1994
SAE-J ACCELERATED EXPOSURE OF AUTOMOTIVE EXTERIOR MATERIALS USING A FLUORESCENT UV AND CONDENSATION APPARATUS
SAE-J CLASSIFICATION, NOMENCLATURE, AND SPECIFICATION DEFINITIONS FOR HORIZONTAL EARTHBORING MACHINES
SAE-J CONTAMINANTS FOR TESTING AIR BRAKE COMPONENTS AND AUXILIARY PNEUMATIC DEVICES
SAE-J METHOD FOR EVALUATING THE FLOW PROPERTIES OF PUMPABLE SEALERS, RECOMMENDED PRACTICE - JUNE 1989
SAE-J (R) STANDARD FOR PROTECTIVE COVERS FOR GASOLINE FUEL LINE TUBING
SAE-J FRONT-WHEEL-DRIVE CONSTANT VELOCITY JOINT BOOT SEALS
SAE-J (R) HEAVY-DUTY ELECTRICAL CONNECTOR PERFORMANCE STANDARD
SAE-J HIGH TENSION IGNITION CABLE
SAE-J (R) IGNITION CABLE ASSEMBLIES
SAE-J PERSONAL WATERCRAFT VENTILATION SYSTEMS, RECOMMENDED PRACTICE - JANUARY 1993
SAE-J SIDE TURN SIGNAL LAMPS FOR LONG VEHICLES
SAE-J TAIL LAMPS (REAR POSITION LAMPS) FOR USE ON VEHICLES 2032 MM OR MORE IN OVERALL WIDTH
SAE-J REFLEX REFLECTORS FOR USE ON VEHICLES 2032 MM OR MORE IN OVERALL WIDTH
SAE-J CLEARANCE, SIDEMARKER, AND IDENTIFICATION LAMPS FOR USE ON MOTOR VEHICLES 2032 MM OR MORE IN OVERALL WIDTH
SAE-J QUICK CONNECT COUPLING SPECIFICATION FOR LIQUID FUEL AND VAPOR/EMISSIONS SYSTEMS
SAE-J (R) PERFORMANCE REQUIREMENTS FOR FUEL SYSTEM TUBING ASSEMBLIES
SAE-J PERSONAL WATERCRAFT FUEL SYSTEMS, RECOMMENDED PRACTICE - JANUARY 1993
SAE-J TIRE PERFORMANCE TECHNOLOGY
SAE-J HIGH-TEMPERATURE POWER STEERING PRESSURE HOSE
SAE-J QUALIFICATIONS FOR FOUR-WAY SUBBASE MOUNTED AIR VALVES FOR AUTOMOTIVE MANUFACTURING APPLICATIONS
SAE-J TEST DEVICE HEAD CONTACT DURATION ANALYSIS
SAE-J BRAKE MASTER CYLINDER PLASTIC RESERVOIR ASSEMBLY FOR ROAD VEHICLES, RECOMMENDED PRACTICE - JUNE 1994
SAE-J1 SELECTION OF TRANSMISSION MEDIA
SAE-J1 CLASS A MULTIPLEXING ACTUATORS
SAE-J7 (R) CLASS A APPLICATION/DEFINITION
SAE-J3 CLASS A MULTIPLEXING SENSORS
SAE-J3 CLASS A MULTIPLEXING ARCHITECTURE STRATEGIES
SAE-J ALL-WHEEL-DRIVE DRIVETRAIN SCHEMATIC SYMBOL STANDARDS
SAE-J R134A REFRIGERANT AUTOMOTIVE AIR-CONDITIONED HOSE
SAE-J FILTER AND FILTER ELEMENT FOR HYDRAULIC SYSTEM(S) USED ON MANUFACTURING AND ASSEMBLY EQUIPMENT, STANDARD - FEBRUARY 1994
SAE-J RECOVERY ATTACHMENT POINTS FOR PASSENGER CARS, VANS, AND LIGHT TRUCKS - FEBRUARY 2001
SAE-J AERODYNAMIC TESTING OF ROAD VEHICLES - OPEN THROAT WIND TUNNEL ADJUSTMENT, INFORMATION REPORT - JUNE 1994
SAE-J AUTMOTIVE STARTER REMANUFACTURING PROCEDURES
SAE-J THE AIR BAG SYSTEMS IN YOUR CAR &WHAT THE PUBLIC NEEDS TO KNOW&
SAE-J ALTERNATOR REMANUFACTURING/REBUILDING PROCEDURES INCLUDES PASSENGER CAR, HEAVY DUTY, INDUSTRIAL, AGRICULTURAL, AND MARINE
SAE-J HIGH-TEMPERATURE POWER STEERING RETURN HOSE - LOW PRESSURE
SAE-J MINIATURE BLADE TYPE ELECTRICAL FUSES, STANDARD - NOVEMBER 1990
SAE-J LOCATION OF ATOMIZER OF ETHER SYSTEMS FOR DIESEL ENGINES, INFORMATION REPORT - MAY 1992
SAE-J (R) TEST PROCEDURE FOR DETERMINING THE RESISTANCE OF SAFETY-GLAZING MATERIALS, OF WHICH ONE SURFACE IS PLASTIC, TO SIMULATED WEATHERING
SAE-J COOLING FLOW MEASUREMENT TECHNIQUES, INFORMATION REPORT - JUNE 1992
SAE-J AERODYNAMIC TESTING OF ROAD VEHICLES-TESTING METHODS AND PROCEDURES, INFORMATION REPORT - JANUARY 1993
SAE-J (R) DAYTIME RUNNING LIGHT
SAE-J TESTING OF WHEELCHAIR LIFTS FOR ENTRY TO OR EXIT FROM A PERSONALLY LICENSED VEHICLE
SAE-J DESIGN CONSIDERATIONS FOR WHEELCHAIR LIFTS FOR ENTRY TO OR EXIT FROM A PERSONALLY LICENSED VEHICLE
SAE-J (R) VEHICLE AND CONTROL MODIFICATIONS FOR DRIVERS WITH PHYSICAL DISABILITIES TERMINOLOGY
SAE-J STANDARD OF PURITY FOR RECYCLED HFC-134A (R-134A) FOR USE IN MOBILE AIR-CONDITIONING SYSTEMS
SAE-J ACCELERATED ENVIRONMENTAL TESTING FOR BONDED AUTOMOTIVE ASSEMBLIES, RECOMMENDED PRACTICE - AUGUST 1992
SAE-J DOOR COURTESY SWITCH
SAE-J HEADLAMP CLEANERS
SAE-J DOLLY ROLLOVER RECOMMENDED TEST PROCEDURE
SAE-J BRAKE PERFORMANCE AND WEAR TEST CODE COMMERCIAL VEHICLE INERTIA DYNAMOMETER
SAE-J TWO-STROKE-CYCLE GASOLINE ENGINE LUBRICANTS PERFORMANCE AND SERVICE CLASSIFICATION
SAE-J BRAKING PERFORMANCE - ASPHALT PAVERS
SAE-J MANUAL CONTROLS FOR MATURE DRIVERS
SAE-J PERSONAL WATERCRAFT - ELECTRICAL SYSTEMS
SAE-J REQUIREMENTS FOR COMPOSITE LIGHTING ASSEMBLIES USED ON CONSTRUCTION AND INDUSTRIAL MACHINERY
SAE-J NUMBERING SYSTEM FOR SINGLE DIAMETER DRILLS
SAE-J NUMBERING SYSTEM FOR TAPS
SAE-J NUMBERING SYSTEM FOR SINGLE DIAMETER AND TAPER REAMERS
SAE-J GUIDELINES FOR REQUESTS RECEIVED FROM OUTSIDE SOURCES FOR THE CONAG COUNCIL TO ORIGINATE OR REVIEW TECHNICAL REPORTS, INFORMATION REPORT - NOVEMBER 1990
SAE-J (R) SELF-PROPELLED SWEEPERS AND CLEANING EQUIPMENT
SAE-J MANUAL TRANSMISSIONS AND TRANSAXLE HIGH-SPEED LUBRICATION, UNBALANCE, AND SEIZURE EVALUATION
SAE-J (R) DISC WHEEL RADIAL RUNOUT LOW POINT MARKING
SAE-J (R) LUMINOUS REFLECTANCE IN SAFETY GLAZING MATERIALS FOR ROAD VEHICLES
SAE-J TESTS FOR SIGNAL AND MARKING DEVICES USED ON VEHICLES 2032 MM OR MORE IN OVERALL WIDTH
SAE-J GENERAL REQUIREMENT FOR PREFORMED HOSES FOR AIR INDUCTION ON HEAVY-DUTY ENGINES
SAE-J SPARK PLUG HEAT RATING CLASSIFICATIONS - FSC 5330
SAE-J (R) HEAVY-DUTY WIRING SYSTEMS FOR TRAILERS 2032 MM OR MORE IN WIDTH
SAE-J SPECIFICATIONS FOR LOW CARBON CAST STEEL SHOT, RECOMMENDED PRACTICE - JUNE 1991
SAE-J CHASSIS DYNAMOMETER TEST PROCEDURE - HEAVY-DUTY ROAD VEHICLES
SAE-J9 CLASS B DATA COMMUNICATION NETWORK MESSAGES DETAILED HEADER FORMATS AND PHYSICAL ADDRESS ASSIGNMENTS
SAE-J9 CLASS B DATA COMMUNICATION NETWORK MESSAGES PART 2: DATA PARAMETER DEFINITIONS
SAE-J9 CLASS B DATA COMMUNICATION NETWORK MESSAGESPART 3 FRAME IDS FOR SINGLE-BYTE FORMS OF HEADERS
SAE-J9 CLASS B DATA COMMUNICATION NETWORK MESSAGES MESSAGE DEFINITIONS FOR THREE BYTE HEADERS
SAE-J TILT TABLE PROCEDURE FOR MEASURING THE STATIC ROLLOVER THRESHOLD FOR HEAVY TRUCKS
SAE-J STEADY-STATE CIRCULAR TEST PROCEDURE FOR TRUCKS AND BUSES
SAE-J V AND 600 V SINGLE-CORE CABLES
SAE-J (R) VEHICLE LIFT POINTS FOR SERVICE GARAGE LIFTING
SAE-J LIFE TEST FOR HEAVY-DUTY STORAGE BATTERIES
SAE-J E/E DATA LINK SECURITY
SAE-J COMMERCIAL TRUCK AND BUS SAE RECOMMENDED PROCEDURE FOR VEHICLE PERFORMANCE PREDICTION AND CHARTING
SAE-J (R) GUIDELINES FOR EVALUATING CHILD RESTRAINT SYSTEM INTERACTIONS WITH DEPLOYING AIRBAGS
SAE-J ENHANCED E/E DIAGNOSTIC TEST MODES, RECOMMENDED PRACTICE - JUNE 1993
SAE-J RECOMMENDED PRACTICE FOR IDENTIFICATION OF STANDARDIZED TRUCK AND TRACTOR ELECTRICAL CIRCUITS
SAE-J RECOMMENDED TESTING METHODS FOR PHYSICAL PROTECTION OF WIRING HARNESSES
SAE-J ROLL-OVER PROTECTIVE STRUCTURES (ROPS) FOR WHEELED AGRICULTURAL TRACTORS
SAE-J SERVICE HOSE FOR AUTOMOTIVE AIR CONDITIONING
SAE-J HFC-134A (R-134A) SERVICE HOSE FITTINGS FOR AUTOMOTIVE AIR-CONDITIONING SERVICE EQUIPMENT
SAE-J (R) GLOSSARY - AUTOMATIC BELT TENSIONER
SAE-J PASSENGER CAR AND LIGHT TRUCK AXLES
SAE-J (R) HEAVY-DUTY WIRING SYSTEMS FOR ON-HIGHWAY TRUCKS
SAE-J SAE 17.6 CUBIC INCH SPARK PLUG RATING ENGINE
SAE-J TIRE SIZE DIFFERENTIAL - ARTICULATED WHEEL LOADER, STANDARD - MAY 1994
SAE-J PARK STANDARD FOR AUTOMATIC TRANSMISSIONS, RECOMMENDED PRACTICE - JUNE 1993
SAE-J CFC-12 (R-12) REFRIGERANT RECOVERY EQUIPMENT FOR MOBILE AUTOMOTIVE AIR-CONDITIONING SYSTEMS
SAE-J HFC-134A (R-134A) RECOVERY/RECYCLING EQUIPMENT FOR MOBILE AIR-CONDITIONING SYSTEMS
SAE-J RECOMMENDED SERVICE PROCEDURE FOR THE CONTAINMENT OF HFC-134A (R-134A)
SAE-J ACCELERATED EXPOSURE OF AUTOMOTIVE INTERIOR TRIM COMPONENTS USING A CONTROLLED IRRADIANCE AIR-COOLED XENON-ARC APPARATUS, RECOMMENDED PRACTICE - MARCH 1993
SAE-J METRIC BALL JOINTS, STANDARD - JUNE 1991
SAE-J SURFACE MATCH VERIFICATION METHOD FOR PRESSURE SENSITIVE ADHESIVELY ATTACHED COMPONENTS
SAE-J PHOTOMETRIC GUIDELINES FOR INSTRUMENT PANEL DISPLAYS THAT ACCOMMODATE OLDER DRIVERS, INFORMATION REPORT - OCTOBER 1991
SAE-J (R) MOBILE AIR CONDITIONING INDUSTRY CRITERIA AND GUIDELINES, INFORMATION REPORT - OCTOBER 1994
SAE-J STANDARDIZED SYMBOLS FOR ELECTRICAL CIRCUIT DIAGRAMS
SAE-J COILED ELECTRICAL CABLE, TECHNICAL REPORT - NOVEMBER 1993
SAE-J6 CONNECTIONS FOR ON-BOARD ROAD VEHICLE ELECTRICAL WIRING HARNESSESPART 3: MULTIPOLE CONNECTORS FLAT BLADE TERMINALSDIMENSIONAL CHARACTERISTICS AND SPECIFIC REQUIREMENTS
SAE-J5 CONNECTIONS FOR ON-BOARD ROAD VEHICLE ELECTRICAL WIRING HARNESSES PART 1: SINGLE-POLE CONNECTORSFLAT BLADE TERMINALS DIMENSIONAL CHARACTERISTICS AND SPECIFIC REQUIREMENTS
SAE-J5 (R) CONNECTIONS FOR ON-BOARD ROAD VEHICLE ELECTRICAL WIRING HARNESSES PART 2: TESTS AND GENERAL PERFORMANCE REQUIREMENTS
SAE-J IDENTIFICATION OF TRUCK, TRAILER, AND BUS WHEEL SEALS AND ASSOCIATED PACKAGING
SAE-J INTERNAL COMBUSTION ENGINES - PISTON RINGS - STEEL RECTANGULAR RINGS
SAE-J INTERNATIONAL TESTS AND SPECIFICATIONS FOR AUTOMOTIVE ENGINE OILS
SAE-J KINGPIN WEAR LIMITS - COMMERCIAL TRAILERS AND SEMITRAILERS
SAE-J ACCELERATED EXPOSURE OF AUTOMOTIVE INTERIOR TRIM MATERIALS USING AN OUTDOOR UNDER GLASS VARIABLE ANGLE CONTROLLED TEMPERATURE APPARATUS, STANDARD - FEBRUARY 1993
SAE-J ACCELERATED EXPOSURE OF AUTOMOTIVE INTERIOR TRIM MATERIALS USING OUTDOOR UNDER-GLASS CONTROLLED SUN-TRACKING TEMPERATURE AND HUMIDITY APPARATUS, STANDARD; - FEBRUARY 1993
SAE-J VEHICLE SYSTEM VOLTAGE - INITIAL RECOMMENDATIONS
SAE-J BUS BODY HEATING SYSTEM TEST
SAE-J EQUIVALENT TEMPERATURE
SAE-J PAINT AND TRIM CODE LOCATION
SAE-J STANDARD METHOD FOR DETERMINING CONTINUOUS UPPER TEMPERATURE RESISTANCE OF ELASTOMERS
SAE-J HEAVY-DUTY STARTER REMANUFACTURING PROCEDURES, RECOMMENDED PRACTICE - FEBRUARY 1995
SAE-J AIRBAG INFLATOR BALLISTIC TANK TEST PROCEDURE GAS GENERATORS USED IN INFLATABLE RESTRAINT SYSTEMS
SAE-J STARTER ARMATURE REMANUFACTURING PROCEDURES
SAE-J AUTOMOTIVE STARTER DRIVE REMANUFACTURING PROCEDURES
SAE-J AUTOMOTIVE STARTER SOLENOID REMANUFACTURING PROCEDURES
SAE-J8 CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING, PART 3: LIGHT-DUTY (L SERIES) STUD ENDS - DIMENSIONS, DESIGN, TEST METHODS, AND REQUIREMENTS
SAE-J7 CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 THREADS AND O-RING SEALING - PART 4: HEAVY-DUTY (S SERIES) EXTERNAL HEX PORT PLUGS - DIMENSIONS, DESIGN, TEST METHODS, AND REQUIREMENTS
SAE-J1 CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 THREADS AND O-RING SEALING PART 1: PORT WITH O-RING SEAL IN TRUNCATED HOUSING - ISO 6149-1
SAE-J1 CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 THREADS AND O-RING SEALING PART 2: HEAVY-DUTY (S SERIES) STUD ENDS - DIMENSIONS, DESIGN, TEST METHODS, AND REQUIREMENTS - ISO 6149-2
SAE-J RECOMMENDED PRACTICE FOR SPLASH AND SPRAY EVALUATION
SAE-J ANTILOCK BRAKE SYSTEM REVIEW, INFORMATION REPORT - JUNE 1992
SAE-J TRUCK TRACTOR POWER OUTPUT FOR TRAILER ABS
SAE-J WHEELCHAIR TIEDOWN AND OCCUPANT RESTRAINT SYSTEMS FOR USE IN MOTOR VEHICLES
SAE-J TEST PROCEDURES FOR AUTOMOTIVE STRUCTURAL COMPOSITE MATERIALS, STANDARD - DECEMBER 1995
SAE-J FLUID POWER PIPING CLEANING PROCESS, INFORMATION REPORT - SEPTEMBER 1995
SAE-J ANTILOCK BRAKE SYSTEMS ENERGY CONSUMPTION TEST PROCEDURE FOR AIR-BRAKED-EQUIPPED TRUCK TRACTORS, BUSES, TRAILERS, AND DOLLIES, RECOMMENDED PRACTICE - MAY 1996
SAE-J (R) LIGHT UTILITY VEHICLES
SAE-J NONMETALLIC FUEL SYSTEM TUBING WITH ONE OR MORE LAYERS
SAE-J STOP LAMPS AND FRONT- AND REAR-TURN SIGNAL LAMPS FOR USE ON MOTOR VEHICLES 2032 MM OR MORE IN OVERALL WIDTH
SAE-J ROAD LOAD MEASUREMENT USING ONBOARD ANEMOMETRY AND COASTDOWN TECHNIQUES
SAE-J CHASSIS DYNAMOMETER SIMULATION OF ROAD LOAD USING COASTDOWN TECHNIQUES, RECOMMENDED PRACTICE - APRIL 1995
SAE-J DIESEL ENGINES - DIESEL FUEL - PERFORMANCE REQUIREMENT AND TEST METHOD FOR ASSESSING FUEL LUBRICITY, STANDARD; - JUNE 1995
SAE-J LOCATION REFERENCING MESSAGE SPECIFICATION (LRMS)
SAE-J SHIP SYSTEMS AND EQUIPMENTTHREADED FASTENERSINSPECTION, TEST, AND INSTALLATION REQUIREMENTS
SAE-J SHIP SYSTEMS AND EQUIMENT PART STANDARD FOR STUDS CONTINOUS AND DOUBLE END (INCH SERIES)
SAE-J SHIP SYSTEMS AND EQUIPMENT - PART STANDARD FOR STUDS - CONTINUOUS AND DOUBLE END (METRIC)
SAE-J INTERNAL COMBUSTION ENGINES - PISTON RING-GROOVES, STANDARD - JULY 1996
SAE-J NUMBERING SYSTEM FOR MULTIPLE DIAMETER CUTTING TOOLS
SAE-J SHOT PEENING COVERAGE
SAE-J SHIP SYSTEMS AND EQUIPMENT - FASTENERS - SELECTION AND IDENTIFICATION REQUIREMENTS, STANDARD - APRIL 1996
SAE-J SELECTING AND SPECIFYING HOT-ROLLED STEEL BAR PRODUCTS
SAE-J (R) DISTRIBUTED LIGHTING SYSTEMS (DLS)
SAE-J MECHANICAL AND MATERIAL REQUIREMENTS FOR ONE PIECE WHEEL NUTS
SAE-J2 HIGH SPEED CAN (HSC) FOR VEHICLE APPLICATIONS AT 125 KBPS
SAE-J2 HIGH SPEED CAN (HSC) FOR VEHICLE APPLICATIONS AT 250 KBPS
SAE-J2 HIGH-SPEED CAN (HSC) FOR VEHICLE APPLICATIONS AT 500 KBPS
SAE-J VENDOR COMPONENT PROGRAM DATA FILE INTERFACE FOR OEM ASSEMBLY OPERATIONS
SAE-J RECOMMENDED DESIGN AND PERFORMANCE STANDARD FOR SEATS WITH INTEGRATED LAP AND SHOULDER RESTRAINTS
SAE-J LIFE CYCLE TESTING OF ELECTRIC VEHICLE BATTERY MODULES
SAE-J ELECTRIC DRIVER BATTERY PACK SYSTEM FUNCTIONAL GUIDELINES
SAE-J COMBINATION PELVIC/UPPER TORSO (TYPE 2) OPERATOR RESTRAINT SYSTEMS FOR OFF-ROAD WORK MACHINES
SAE-J7 ENERGY TRANSFER SYSTEM FOR ELECTRIC VEHICLES - PART 1: FUNCTIONAL REQUIREMENTS AND SYSTEM ARCHITECTURES
SAE-J7 ENERGY TRANSFER SYSTEM FOR ELECTRIC VEHICLES - PART 2: COMMUNICATION REQUIREMENTS AND NETWORK ARCHITECTURE
SAE-J FASTENER PART STANDARD - CAPS SCREWS, HEX BOLTS, AND HEX NUTS (INCH DIMENSIONED)
SAE-J RETEST OF REFRIGERANT CONTAINER
SAE-J ULTRAVIOLET LEAK DETECTION: STABILITY AND COMPATIBILITY CRITERIA OF FLUORESCENT REFRIGERANT LEAK DETECTION DYES FOR MOBILE R-134A AIR- CONDITIONING SYSTEMS, STANDARD - SEPTEMBER 1996
SAE-J ULTRAVIOLET LEAK DETECTION: PROCEDURE FOR USE OF REFRIGERANT LEAK DETECTION DYES FOR SERVICE OF MOBILE AIR-CONDITIONING SYSTEMS, STANDARD - SEPTEMBER 1996
SAE-J ULTRAVIOLET LEAK DETECTION: PERFORMANCE REQUIREMENTS FOR FLUORESCENT REFRIGERANT LEAK DETECTION DYE INJECTION EQUIPMENT FOR AFTERMARKET SERVICE OF MOBILE AIR- CONDITIONING SYSTEMS, STANDARD - SEPTEMBER 1996
SAE-J UNIVERSAL JOINT END YOKE CONNECTION (EARWORK)
SAE-J THERMAL EFFECTIVENESS OF SLEEVE INSULATION
SAE-J SAFETY FOR HORIZONTAL EARTHBORING MACHINES
SAE-J RECTANGULAR CROSS SECTION POLYMERIC SEALING RINGS (METRIC)
SAE-J AUTOMATIC TRANSMISSION HYDRAULIC PUMP TEST PROCEDURE
SAE-J AUTOMATIC TRANSMISSION INTAKE FILTER TEST PROCEDURE
SAE-J ON-BOARD LAND VEHICLE MAYDAY REPORTING INTERFACE
SAE-J ETHICS FOR ACCIDENT INVESTIGATION AND RECONSTRUCTION
SAE-J WHEEL NUT SEAT STRENGTH
SAE-J WHEEL NUT SEAT SYSTEM TEST PROCEDURES AND PERFORMANCE REQUIREMENTS FOR PASSENGER CARS AND LIGHT TRUCKS
SAE-J TAMPER RESISTANCE FOR ADJUSTABLE PARAMETERS ON DIESEL FUEL INJECTION PUMPS
SAE-J AIR BRAKE ACTUATOR TEST PERFORMANCE REQUIREMENTS
SAE-J LOW-SPEED IMPACT BUMPER SYSTEM TEST PROCEDURE FOR PASSENGER VEHICLES
SAE-J DISCHARGE SIGNAL LIGHTNING SYSTEM
SAE-J SHIP SYSTEMS AND EQUIPMENTGENERAL SPECIFICATION FOR FILTER ELEMENTSHYDRAULIC AND LUBE OIL SERVICE
SAE-J0 DISPOSABLE HYDRAULIC FILTER ELEMENT - 115L/MIN FLOW, 1.0 MPA COLLAPSE PRESSURE, FILTRATION RATIO = 75 AT 6 AND 10 UM
SAE-J0 DISPOSABLE HYDRAULIC FILTER ELEMENT - 190 L/MIN FLOW, 21 MPA COLLAPSE PRESSURE, FILTRATION RATIO = 75 AT 7 UM
SAE-J0 DISPOSABLE HYDRAULIC FILTER ELEMENTS - 21 MPA COLLAPSE PRESSURE, FILTRATION RATIO = 75 AT 10 UM, 75 TO 175 L/MIN
SAE-J CATEGORIZATION AND PROPERTIES OF LOW-CARBON AUTOMOTIVE SHEET STEELS
SAE-J WALK-ALONG WORK MACHINESBRAKING SYSTEMSPERFORMANCE REQUIREMENTS AND TEST PROCEDURES
SAE-J OPERATOR'S FIELD OF VIEW-ENGINEERING EVALUATION
SAE-J MARKING OF RUBBER PARTS
SAE-J SHIP SYSTEMS AND EQUIPMENT - HYDRAULIC SYSTEMS - FILTER SELECTION PARAMETERS
SAE-J LABORATORY CYCLIC CORROSION TEST
SAE-J2 CONNECTIONS FOR FLUID POWER AND HIGH PRESSURE USEPORTS, STUD ENDS, AND PLUGS WITH ISO 261 THREADS AND O-RING SEALINGPART 1: PORTS WITH RECESSED CONICAL SEAT REQUIREMENTS, DIMENSIONS, DESIGN, AND TEST METHODS
SAE-J2 CONNECTIONS FOR FLUID POWER AND HIGH PRESSURE USE PORTS, STUD ENDS, AND PLUGS WITH ISO 261 THREADS AND O-RING SEALINGPART 2: STUD END REQUIREMENTS, DIMENSIONS, DESIGN, AND TEST METHODS
SAE-J2 CONNECTIONS FOR FLUID POWER AND HIGH PRESSURE USEPORTS, STUD ENDS, AND PLUGS WITH ISO 261 THREADS AND O-RING SEALINGPART 3: PORT PLUG REQUIREMENTS, DIMENSIONS, DESIGN, AND TEST METHODS
SAE-J CATEGORIZATION AND PROPERTIES OF DENT RESISTANT, HIGH STRENGTH, AND ULTRA HIGH STRENGTH AUTOMOTIVE SHEET STEEL
SAE-J NUMBERING SYSTEMS FOR END MILLS
SAE-J RECOMMENDED PRACTICES FOR LNG POWERED HEAVY-DUTY TRUCKS
SAE-J GUIDELINES FOR ELECTRIC VEHICLE SAFETY
SAE-J ELECTRIC WINDSHIELD WASHER SWITCHTRUCKS, BUSES, AND MULTIPURPOSE VEHICLES
SAE-J ELECTRIC WINDSHIELD WIPER SWITCHTRUCKS, BUSES, AND MULTIPURPOSE VEHICLES
SAE-J ELECTRIC BLOWER MOTOR SWITCHTRUCKS, BUSES, AND MULTIPURPOSE VEHICLES
SAE-J MAYDAY INDUSTRY SURVEY INFORMATION REPORT
SAE-J DATA DICTIONARY FOR ADVANCED TRAVELER INFORMATION SYSTEMS (ATIS)
SAE-J MESSAGE SETS FOR ADVANCED TRAVELER INFORMATION SYSTEM (ATIS)
SAE-J ITS DATA BUS ARCHITECTURE REFERENCE MODEL INFORMATION REPORT
SAE-J GRAPHICAL MODEL FOR INTERACTIVE DISTRIBUTED CONTROL
SAE-J APPLICATION GUIDELINES FOR ELECTRONICALLY DRIVEN AND/OR CONTROLLED EXTERIOR AUTOMOTIVE LIGHTING EQUIPMENT
SAE-J LOW SPEED VEHICLES
SAE-J LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, MILITARY COMBAT/TACTICAL SERVICE
SAE-J LUBRICATING OIL, GEAR MULTIPURPOSE (METRIC) MILITARY USE
SAE-J LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, PRESERVATION BREAK-IN
SAE-J (R) LUBRICATING OIL, AUTOMOTIVE ENGINE, API SERVICE SM FOR MILITARY ADMINISTRATIVE SERVICE
SAE-J (R) LUBRICATING OIL FOR WHEELED MILITARY VEHICLES WITH HEAVY-DUTY DIESEL ENGINES
SAE-J NAVIGATION AND ROUTE GUIDANCE FUNCTION ACCESSIBILITY WHILE DRIVING
SAE-J CALCULATION OF THE TIME TO COMPLETE IN-VEHICLE NAVIGATION AND ROUTE GUIDANCE TASKS
SAE-J2 ITS DATA BUSTHIN TRANSPORT LAYER
SAE-J2 ITS DATA BUSAPPLICATION MESSAGE LAYER
SAE-J1 ITS DATA BUS - IDB-C PHYSICAL LAYER
SAE-J01 ITS DATA BUS - LOW IMPEDANCE STEREO AUDIO (LISA)
SAE-J1 LINK LAYER
SAE-J STANDARDS FOR ATIS MESSAGE SETS DELIVERED OVER REDUCED BANDWIDTH MEDIA
SAE-J GEOMETRIC DIMENSIONS AND TOLERANCING FOR CURVED HOSE
SAE-J CLAMPING FORCE TEST PROCEDURE
SAE-J FIELD TEST ANALYSIS INFORMATION REPORT
SAE-J STAKEHOLDER-? WORKSHOP INFORMATION REPORT
SAE-J LOCATION REFERENCING MESSAGE SPECIFICATION REFERENCING MEASSAGE SPECIFICATION
SAE-J SELECTION OF ADHESIVES FOR THE ATTACHMENT OF EXTERIOR AFTERMARKET ACCESSORIES
SAE-J NEW-VEHICLE COLLISION REPAIR INFORMATION
SAE-J TEST PROCEDURE FOR TRAILER AIR RESERVOIR FILL AND PARKING BRAKE RELEASE TIMES
SAE-J PERFORMANCE ENGINE BUILDING RECOMMENDED PRACTICES
SAE-J VIBRATION TESTING OF ELECTRIC VEHICLE BATTERIES
SAE-J VIDEO BASED LIGHT MEASUREMENT TECHNIQUES
SAE-J AIR DRYER INSTALLATION PROCEDURE
SAE-J AIR DRYER TEST PROCEDURE
SAE-J DIMENSIONS AND TOLERANCES FOR COOLANT SYSTEM HOSES
SAE-J SECONDARY CONTROL MODIFICATIONS
SAE-J CATEGORIZATION AND PROPERTIES OF SAE COLD ROLLED STRIP STEELS
SAE-J SEVEN-CONDUCTOR CABLE FOR ABS POWER
SAE-J ITS IN-VEHICLE MESSAGE PRIORITY
SAE-J DEFINITIONS AND EXPERIMENTAL MEASURES RELATED TO THE SPECIFICATION OF DRIVER VISUAL BEHAVIOR USING VIDEO BASED TECHNIQUES
SAE-J ADAPTIVE CRUISE CONTROL (ACC) OPERATING CHARACTERISTICS AND USER INTERFACE
SAE-J HUMAN FACTORS IN FORWARD COLLISION WARNING SYSTEMS: OPERATING CHARACTERISTICS AND USER INTERFACE REQUIREMENTS
SAE-J ROAD VEHICLES - SYMBOLS FOR CONTROLS, INDICATORS, AND TELL-TALES - ISO 2575
SAE-J MEDIUM/HEAVY-DUTY E/E SYSTEMS DIAGNOSIS NOMENCLATURE
SAE-J LOW-PERMEATION FUEL FILL AND VENT TUBE
SAE-J RECOMMENDED PRACTICES FOR CNG POWERED MEDIUM AND HEAVY-DUTY TRUCKS
SAE-J CLUTCH INSTALLATION AND RELEASE LINKAGE REQUIREMENTS FOR TRUCK AND BUS APPLICATION
SAE-J CLUTCH REQUIREMENTS FOR HIGH-TORQUE TRUCK AND BUS ENGINES
SAE-J (R) STRAIN-LIFE FATIGUE DATA FILE FORMAT
SAE-J SINGLE WIRE CAN NETWORK FOR VEHICLE APPLICATIONS
SAE-J ACCELERATED EXPOSURE OF AUTOMOTIVE INTERIOR TRIM COMPONENTS USING A CONTROLLED IRRADIANCE XENON-ARC APPARATUS
SAE-J PROTOCOL TO VERIFY PERFORMANCE OF NEW XENON ARC TEST APPARATUS
SAE-J APPLICATION TESTING OF OIL-TO-WATER OIL COOLERS FOR HEAT TRANSFER PERFORMANCE
SAE-J LIFT CAPACITY CALCULATION METHOD KNUCKLE-BOOM LOG LOADERS AND CERTAIN FORESTRY EQUIPMENT
SAE-J OCCUPANT RESTRAINT SYSTEM EVALUATIONFRONTAL IMPACT COMPONENT-LEVEL HEAVY TRUCKS
SAE-J OCCUPANT RESTRAINT SYSTEM EVALUATIONFRONTAL IMPACT SYSTEM-LEVEL HEAVY TRUCKS
SAE-J COE FRONTAL STRENGTH EVALUATION - DYNAMIC LOADING HEAVY TRUCKS
SAE-J CAB ROOF STRENGTH EVALUATION - QUASI-STATIC LOADING HEAVY TRUCKS
SAE-J FREE MOTION HEADFORM IMPACT TESTS OF HEAVY TRUCK CAB INTERIORS
SAE-J STEERING CONTROL SYSTEMS - LABORATORY TEST PROCEDURE HEAVY TRUCKS
SAE-J OCCUPANT RESTRAINT SYSTEM EVALUATIONLATERAL ROLLOVER SYSTEM-LEVEL HEAVY TRUCKS
SAE-J FREE-ROLLING CORNERING TEST FOR TRUCK AND BUS TIRES
SAE-J DYNAMOMETER EFFECTIVENESS CHARACTRIZATION TEST FOR PASSENGER CAR AND LIGHT TRUCK BRAKE FRICTION PRODUCTS
SAE-J EFFECTS OF FRONT-MOUNTED ACCESSORIES ON AIR BAG SENSORS AND CRASHWORTHINESS
SAE-J PERFORMANCE TESTING OF PK SECTION V-RIBBED BELTS
SAE-J WELDED FLASH CONTROLLED, SAE 1021 CARBON STEEL TUBING, NORMALIZED FOR BENDING, DOUBLE FLARING, AND BEADING
SAE-J ACCESSORY DRIVE TENSIONER TEST STANDARDS (MECHANICAL ROTARY TYPE)
SAE-J AIR STARTER MOTOR TEST PROCEDURES
SAE-J LOW-TEMPERATURE CRANKING LOAD REQUIREMENTS OF AN ENGINE - AIR STARTER METHOD
SAE-J DOMESTIC PERFORMANCE TORQUE CONVERTER MANUFACTURING
SAE-J SHOT PEENING
SAE-J HARMONIZED PROVISIONS FOR INSTALLATION OF LAMPS AND RETRO-REFLECTING DEVICES ON ROAD VEHICLES EXCEPT MOTORCYCLES
SAE-J TRANSLATION QUALITY METRIC
SAE-J STEPWISE COASTDOWN METHODOLOGY FOR MEASURING TIRE ROLLING RESISTANCE
SAE-J MANUAL TRANSMISSION AND TRANSAXLE EFFICIENCY AND PARASITIC LOSS MEASUREMENT
SAE-J DRIVETRAIN SYSTEMS VIBRATION ANALYSIS DATA REQUIREMENTS
SAE-J MERCURY SWITCH REMOVAL PROCESS
SAE-J AIR QUALITY FOR AIR BRAKED VEHICLES
SAE-J EXHAUST BRAKE DYNAMOMETER TEST AND CAPABILITY RATING PROCEDURE
SAE-J VEHICLE ELECTRONIC PROGRAMMING STATIONS (VEPS) SYSTEM SPECIFICATION FOR WIN32
SAE-J ELECTRIC VEHICLE BATTERY ABUSE TESTING
SAE-J WELDED AND COLD-DRAWN, SAE 1021 CARBON STEEL TUBING NORMALIZED FOR BENDING AND FLARING
SAE-J ROAD VEHICLES - BRAKE LININGS - COMPRESSIBILITY TEST PROCEDURE
SAE-J CLUTCH APPLICATION POWERTRAIN STARTABILITY RATING REQUIREMENTS FOR TRUCK AND BUS APPLICATONS
SAE-J HYDRAULIC FLUID POWER - VALVES - METHOD FOR ASSESSING THE LOCK SENSITIVITY TO CONTAMINANTS
SAE-J SELF-PROPELLED SWEEPERS AND SCRUBBERS - MAXIMUM GRADIENT RATING DURING HOPPER DISCHARGE
SAE-J SELF PROPELLED SWEEPERS AND SCRUBBERS BATTERY RUN-TIME
SAE-J WHEEL END ASSEMBLY AND AXLE SPINDLE INTERFACE DIMENSIONS - TRUCK AND BUS
SAE-J AUTOMOTIVE AUSTEMPERED DUCTILE (NODULAR) IRON CASTINGS (ADI)
SAE-J DYNAMIC SIMULATION SLED TESTING
SAE-J FASTENER PART STANDARDMACHINE SCREWS
SAE-J FASTENER PART STANDARD - MACHINE SCREW NUTS (METRIC AND INCH)
SAE-J TENSION INDICATING WASHER TIGHTENING METHOD FOR FASTENERS
SAE-J SAE NO.2 FRICTION TEST MACHINE 3600 R/MIN STEPPED POWER TEST
SAE-J SAE NO.2 FRICTION TEST MACHINE DURABILITY TEST
SAE-J SAE NO.2 FRICTION TEST MACHINE UPVT TEST
SAE-J CONSIDERATIONS FOR SUSPENSION MODIFICATION
SAE-J4 DIMENSIONAL SPECIFICATIONS FOR METALLIC BODY PUSH-TO-CONNECT FITTINGS USED ON A VEHICULAR AIR BRAKE SYSTEM - SUPERSEDING J2494
SAE-J2 DIMENSIONAL SPECIFICATIONS FOR NON-METALLIC BODY PUSH-TO-CONNECT FITTINGS USED ON A VEHICULAR AIR BRAKE SYSTEM
SAE-J2 PERFORMANCE REQUIREMENTS FOR SAE J844 NON-METALLIC AIR BRAKE TUBING AND PUSH TO CONNECT FITTING ASSEMBLIES USED IN VEHICULAR AIR BRAKE SYSTEMS
SAE-J2 CARTRIDGE CAVITY