sub-projects
Upgrading from EOL Fedora using yum
From FedoraProject
English (en)
as wellThis page is an addendum to .
It contains the problems you might encounter running yum update between specific EOL Fedora releases.
Please be sure to read
for an overview of the entire process as well as notes on upgrading from the oldest supported release to the current release.
Back up any personal data to an external hard drive or to another machine.
If there is some unrecoverable error that requires a fresh install, you don't want to lose any data.
Further down in this page there is a list of common problems for specific versions. Some of them require attention before the upgrade.
General advice on upgrading Fedora can be found on the
page. You should also read the
for the version you plan to upgrade to - they contain important information regarding upgrading issues. Finally, check the list of .
Review and remove all .rpmsave and .rpmnew files before and after upgrading. (And if you have selinux enabled then remember to check security context if you move config files around.)
Find unused config filesMerge and resolve the changes found by the following script: for a in $(find /etc /var -name '*.rpm?*'); do diff -u $a ${a%.rpm?*}; done
Now is a good time to remove packages you don't use - especially non-standard packages.
Find and review "unused" packagesYou can find packages not required by other packages with the tool package-cleanup from the yum-utils package: yum install yum- package-cleanup --leaves. These packages could be candidates for removal, but check to see whether you use them directly or if they are used by applications not backed by rpm packages. Remove them with yum remove package-name-and-version.
Another useful tool for cleaning up unused packages is rpmreaper.
It's an ncurses application that lets you view rpm dependency graph and mark packages for deletion.
Marking one package can make other packages leaf, which you can see immediately, so you don't have to run the tool several times to get rid of whole sub-tree of unused packages.
Install with: yum install rpmreaper.
Find and review "lost" packagesYou can find orphaned packages (ie packages not in the repositories anymore) with: package-cleanup --orphans. This will also show packages which have been partially uninstalled but where the "%postun" script failed.
Then remove all traces of the version you are leaving from the yum cache in /var/cache/yum.
yum clean all
Update the packages that decide which yum repositories to use.
rpm -Uhv http://archives.fedoraproject.org/pub/fedora/linux/releases/&ReleaseNumber&/Fedora/i386/os/Packages/fedora-release-*.noarch.rpm
(The architecture doesn't matter for this noarch package.)
For archived versions of Fedora (e.g., from 14 included downwards):
rpm -Uhv http://archives.fedoraproject.org/pub/archive/fedora/linux/releases/&ReleaseNumber&/Fedora/i386/os/Packages/fedora-release-*.noarch.rpm
Note: Some users have reported that attempting to download through rpm returns a 550 response and "transfer failed" messages.
If this is the case, you can download the rpms and install locally.
wget ftp://dl.fedoraproject.org/pub/fedora/linux/releases/&ReleaseNumber&/Fedora/&Arch&/os/Packages/fedora-release-*.noarch.rpm
rpm -Uvh fedora-release-*.noarch.rpm
For archived versions of Fedora (e.g., from 14 included downwards):
wget ftp://dl.fedoraproject.org/pub/archive/fedora/linux/releases/&ReleaseNumber&/Fedora/&Arch&/os/Packages/fedora-release-*.noarch.rpm
rpm -Uvh fedora-release-*.noarch.rpm
Make sure the new repo files isn't placed as .rpmnew files, perhaps by
mv /etc/yum.repos.d/fedora-updates.repo.rpmnew /etc/yum.repos.d/fedora-updates.repo
mv /etc/yum.repos.d/fedora.repo.rpmnew /etc/yum.repos.d/fedora.repo
If you have 3rd party repositories configured, you may need to adjust them for the new Fedora version. If you switch from one Fedora release to another there is often nothing that needs to be done.
If you switch to Rawhide from a standard Fedora release (or vice versa) then most of the time you will need to install the Rawhide release RPMs from the 3rd party repository as well (or the standard ones, if switching back).
Note that the upgrade is likely to fail if there are outdated dependencies from packages not backed by a yum repository or backed by a repository which isn't ready for the new version.
If using selinux make sure it is in permissive mode - neither disabled nor enforcing.
It is a good idea to do the upgrade outside the graphical environment. Log out of your graphical desktop and then go to a text console
ctrl + alt + F2
log in as root, and go into runlevel 3
Once a live upgrade is started do not stop the upgrade by rebooting, killing the process, or by any other method until it is complete, doing so will cause the affected system to be in a mixed state. Partially the old release and partially the new release.
In this state the system will not be reliable and will not operate as expected.
The only way to recover from this is to reinstall if it occurs.
Update all packages at onceAlthough you can try to update the update machinery first with yum update rpm\* yum\* or with glibc, in both cases dependencies might expand it to an almost full upgrade anyway, and simply doing a full upgrade might be more safe (but your mileage may vary). (In particular, do not upgrade rpm and yum separately if upgrading to a system with a different version of python e.g. 2.4 to 2.5.)
Upgrade all packages with
yum upgrade
yum might complain about conflicts or requirements. That is probably because you have used non-standard repositories or installed non-standard packages manually. Try to guess which packages cause the problem (or at least is a part of the dependency chain) - uninstall them and try again. Remember to install the packages again if they are essential.
Ensure that all (new) essential packages from the new version are installed with
yum groupupdate Base
You might want to update other groups too, see
yum grouplist
For example
yum groupupdate &GNOME Desktop Environment& \
&Development Tools& &Server Configuration Tools& \
&Hardware Support& &Sound and Video& \
&Graphical Internet& &Fonts& \
&Games and Entertainment& &Printing Software& \
&Administration Tools& &Office/Productivity& &System Tools&
Before booting you should usually install the bootloader from your new grub by running
/sbin/grub-install BOOTDEVICE
- where BOOTDEVICE is usually /dev/sda (If you get an error '/dev/sda does not have any corresponding BIOS drive' from that, then try /sbin/grub-install --recheck /dev/sda.)
Also, the order of init scripts could have changed from the previous version. A command to reset the order is:
cd /etc/rc.d/init.d; for f in *; do /sbin/chkconfig $ done
Again, run package-cleanup --orphans to find packages that haven't been upgraded.
Install the new Fedora 20 gpg key and upgrade:
# rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-20-$(uname -i)
# yum update yum
# yum clean all
# yum --releasever=20 --setopt=deltarpm=0 distro-sync
Incompatible systemd cgroups hierarchy layoutsystemd in F19 lays out its cgroups hierarchy differently than in previous Fedora releases.
The new hierarchy has some advantages, but it is incompatible with the old one. No live conversion of the hierarchy is performed during the package upgrade,
so the upgraded systemd will not understand the previous state of the system correctly. This is known to affect the tracking of user sessions by systemd-logind ().
Expect breakage in active user sessions and make sure to reboot soon after performing the upgrade.
If your screen locks during the upgrade, you may not be able to log back in due to the cgroup changes.
Running the upgrade in a screen(1) session has been reported as a workaround (re-attach from a vt).
Install the new Fedora 19 gpg key and upgrade:
# rpm --import
# yum update yum
# yum clean all
# yum --releasever=19 --disableplugin=presto distro-sync
If you use Fedora ARM, run these commands instead:
# rpm --import
# yum update yum
# yum clean all
# yum --releasever=19 distro-sync
Recommended Upgrade Method (Fedora 17 and newer)Upgrading with FedUp is the recommended way to upgrade your system!Please check
Note: One user has reported problems trying to upgrade an Intel Mac UEFI installation using this method, including the manual bootloader migration.
Install the new Fedora 18 gpg key: su -c 'rpm --import '
If you are using SELinux in Enforcing mode, make sure your selinux-policy is up to date: su -c 'yum update selinux-policy'
Upgrade all packages:
su -c 'yum update yum'
su -c 'yum clean all'
su -c 'yum --releasever=18 --disableplugin=presto distro-sync'
It is recommended that updates be enabled for this step, for best results.
Rebuild rpm database: su -c 'rpm --rebuilddb', or rpm -qa will not work due to an upgrade of rpm
If you used an outdated selinux-policy package in Enforcing mode during the upgrade, you may notice errors in the yum output when several packages attempt to create users and/or groups, and after the upgrade you may have problems related to these packages, including issues with logging in via GDM (you may just see a spinning cursor) and/or performing actions requiring administrative privileges. This is a result of . If you have this problem, you should re-install the affected packages with su -c 'yum reinstall (packagenames)', and then reboot. Affected packages may include libvirt-daemon and polkit: su -c 'yum reinstall libvirt-daemon polkit'
Due to , the upgrade may leave you without a display manager enabled. To solve this problem, use su -c 'systemctl enable yourdm.service', replacing yourdm with the display manager you intend to use, e.g. gdm or kdm.
There is a general warning about upgrading via. yum being unsupported . However Fedora 17 is very special. You should seriously consider stopping now and just using anaconda via. DVD or preupgrade, unlike all previous releases it's what the yum/rpm developers recommend. Continue at your own risk.
First install the new Fedora 17 gpg key
rpm --import
Fedora 17 will locate the entire base operating system in /usr. The directories
/bin, /sbin, /lib, /lib64 will only be symlinks:
/bin → /usr/bin
/sbin → /usr/sbin
/lib → /usr/lib
/lib64 → /usr/lib64
Some reasoning behind this change is outlined here:
Currently installed systems need some manual steps to convert the current system
to match the layout of Fedora 17. After that, the system can continue to
be updated with YUM as usual.
Some RPM packages in Fedora 17 are carrying an RPM dependency guard, which
will make sure, they can only be installed when /bin, /sbin, /lib, /lib64 are
symlinks and not directories like in Fedora 16 and older.
The installed system’s base filesystem layout can not be safely altered, while
the system itself is running on top of it. Dracut, the initramfs used to find
and mount the root filesystem, can be instructed to convert the filesystem to
match Fedora 17’s expectations.
If your system has a split-off /usr, a separate mount point, the dracut /usr
mount conversion logic might not work. If /usr resides on the net, then you should add "rd.neednet=1" and the network settings like "ip=dhcp" on the kernel command line.
/usr on iSCSI, FCoE, NBD also is supported, as long as “netroot=...” is
specified on the kernel command line for these disks (see man dracut.kernel(7)).
If you have /usr on LVM, MD raid or DM raid, make sure the kernel command line has either all settings like "rd.lvm.lv=..." to ensure the /usr device is accessible in dracut or just remove all restrictions like "rd.lvm...", "rd.md...", "rd.dm...". Either way, you should probably use anaconda to update, if you are experiencing problems with a separate /usr.
You will have to manually convert "/var/run" and "/var/lock" to a symbolic link.
# mv -f /var/run /var/run.runmove~
# ln -sfn ../run /var/run
# mv -f /var/lock /var/lock.lockmove~
# ln -sfn ../run/lock /var/lock
Here are the steps to prepare your system, to convert it, and to be able to
continue updating your installed system with yum:
Download and install the most recent dracut packages:
# yum update dracut
You should at least have
for Fedora 15 or
for Fedora 16.
Turn off any "hostonly" settings in /etc/dracut.conf*, if you turned on "hostonly".
Update the installed initramfs image for your current kernel, and instruct
dracut to include the dracut module to convert your current filesystem:
# dracut --force --add convertfs
If your system has a split-off /usr, a separate mount point, and you don't know the kernel command line parameter to add, you can also try (dracut tries to generate them internally), but you have to install at least .
# dracut -H --force --add convertfs
If dracut detects ‘rd.convertfs’ on the kernel command line at bootup, it starts
the filesystem conversion of the root filesystem. If it is already converted, it will just do nothing.
dracut will by default update the initramfs for the currently running kernel. Make sure that no new kernel has been installed since last boot and that you really will boot into the updated initramfs.
Change the following kernel commandline parameter directly in the bootloader
menu, which is shown during bootup, or edit the line in /etc/grub*.cfg
to remove ro and rhgb and append
rd.convertfs enforcing=0
Explanation of the options:
- remove “ro” (read only)
- append “rw” (read write) to let dracut mount your root filesystem writeable
- remove “rhgb” (Red Hat graphical boot) to disable the graphical bootsplash
- append “rd.info” to get a more verbose output from dracut
- append “rd.convertfs” to enable the /usr-move conversion script in dracut
- append “enforcing=0” to disable SELinux enforcement
During bootup, dracut will now convert your filesystem, and /lib, /lib64, /bin
and /sbin should then all be symbolic links to the corresponding directories in
After the conversion, the system needs to be immediately updated to Fedora 17. No
packages from Fedora 16 or Fedora 15, or older rawhide packages must be installed anymore.
Make sure to disable any Fedora 15 and Fedora 16 repositories in yum!
Any files with conflicting names, which the conversion could not resolve, will
be backed up to files named *.usrmove~ residing in /usr/lib, /usr/lib64,
/usr/bin and /usr/sbin.
Verify that dracut really completed the conversion. The log messages, which dracut has generated during bootup, can be retrieved with:
# dmesg | grep dracut
After a successful conversion, revert the changes made to the kernel command
line in the bootloader config file /etc/grub*.cfg.
# rm -f /var/lib/rpm/__*
# rpm --rebuilddb
# yum --releasever=17 update rpm
# rm -f /var/lib/rpm/__*
# rpm --rebuilddb
# yum --releasever=17 --disableplugin=presto distro-sync
# fixfiles onboot
After upgrading, all should be set and done.
Have fun with your system and say “Good bye” to /bin, /sbin, /lib, /lib64 and
meet them in /usr.
First install the new fedora 16 gpg key. You may wish to verify this package against
and the fedora ssl certificate.
rpm --import https://fedoraproject.org/static/A82BA4B7.txt
Next run chkconfig --list and note
you will need to re-enable these with systemctl enable xxxxx.service after you reboot, as the
settings aren't propagated into . See
for more details.
Upgrade all packages with
yum update yum
yum clean all
yum --releasever=16 --disableplugin=presto distro-sync
Bootloader changeAfter the upgrade, you will have the
packages installed and the
package removed. However, grub will still be installed to the MBR and booting should still work. You can follow the instructions below to switch to grub2 if you choose. If installed, the
package may do simply remove that package if that is the case.
If your system uses a BIOS, or you installed Fedora via BIOS emulation mode on an EFI system (not native EFI mode), you can switch to Fedora 16's supported grub2 bootloader with the following instructions. If your system was installed by native EFI boot, do not switch to grub2, as its EFI support is still unreliable. Fedora 16's supported bootloader for native EFI installations is still grub-legacy, so you should simply continue to use the system without making any special changes to the bootloader configuration.
To switch to grub2, run the command su -c '/sbin/grub2-mkconfig -o /boot/grub2/grub.cfg', then proceed as described
with reinstalling the bootloader, but call grub2-install /dev/XXX instead of grub-install /dev/XXX.
Known you upgrade -specific issues (for common problems, see references above):
- F15-&F16 yum update fails with IMSM (BIOS) raid
First install the new fedora 15 gpg key. You may wish to verify this package against
and the fedora ssl certificate.
rpm --import https://fedoraproject.org/static/069C8460.txt
Upgrade all packages with
yum update yum
yum clean all
yum --releasever=15 --disableplugin=presto distro-sync
Do not run this from within an X terminal. Testing shows that X might hang while updating bitmap font packages.
There exist .drpms, but they don't match, due to a format change, so better disable the presto plugin by adding the option "--disableplugin=presto" (without quotes) when running yum.
The F15 screen client is not capable of attaching to F14 screen sessions.
Thus, if you want to run the upgrade under screen, you should either upgrade screen itself in a separate operation or make a separate copy of screen to use throughout the process.
mysql 5.5.20 shipped with F15 uses InnoDB as default storage engine. After upgrading, mysqld could refuse to start-up with error Unknown/unsupported storage engine: InnoDB if argument skip-innodb is given on command line or configuration file /f. Workarounds are removing the line (InnoDB will be run as default engine), or adding default-storage-engine command options specifying some other storage engine.
The steps above work perfectly for upgrading a Fedora 14 guest to Fedora 15, but you also need to remove the Guest Additions. If you forget, F14 -& F15 upgrades will seem to fail after the first reboot. If that happens, log in to the console with CTRL+ALT+F2 and reinstall the guest additions manually:
mount /dev/cdrom /media
# if /dev/cdrom does not exist, try:
# mount /dev/sr0 /media
/bin/sh /media/VBoxLinuxAdditions.run
First install the new fedora 14 gpg key. You may wish to verify this package against
and the fedora ssl certificate.
rpm --import https://fedoraproject.org/static/97A1071F.txt
Upgrade all packages with
yum update yum
yum clean all
yum --releasever=14 distro-sync
If using VirtualBox from the Oracle repository, you must remove the VirtualBox-3.1 package before upgrading.
After the upgrade is finished, install VirtualBox-3.2.
If you are running SELinux you may be locked out of your machine and required to boot to single user mode to fix up your machine.
describes a fix as:
setenforce 0
yum remove selinux-policy selinux-policy-targeted
rm -rf /etc/selinux/targeted
If, after upgrading you want selinux back:
yum install selinux-policy selinux-policy-targeted
fixfiles restore
First install the new fedora 13 gpg key. You may wish to verify this package against
and the fedora ssl certificate.
rpm --import https://fedoraproject.org/static/E8E40FDE.txt
Upgrade all packages with
yum update yum
yum clean all
yum --releasever=13 distro-sync
Testing shows that upgrading within X will cause X to hang when installing bitmap-fonts-compat, but it can be done anyway by making sure that bitmap-fonts-compat is the last package to update ... YMMV.
Intel video no longer works without Kernel Mode Setting (KMS).
You must remove 'nomodeset' from your /etc/grub.conf kernel command line, if present.
nVidia video no longer works without kernel mode Setting (KMS).
You must remove 'nomodeset' from your /etc/grub.conf kernel command line, if present.
It may be necessary to run "db_recover -h /var/lib/ldap/ ; chown ldap:ldap /var/lib/ldap/*" once in order for slapd to start.
All Fedora 12 RPM packages use XZ/LZMA compression, which is only supported by the
(or later) for Fedora 11. Before upgrading from Fedora 11, run yum update rpm.
It is not possible to update directly from Fedora 10 or earlier with yum. To upgrade from Fedora 10, first update to Fedora 11, and then upgrade from Fedora 11 to Fedora 12. If you are using a release before Fedora 10, use one of the official upgrade methods or backup your data, perform a fresh installation, and restore from backup.
Upgrades from Fedora 11 might currently fail with missing dependencies (for example related to
or ). The dependencies are ok, but Fedora 11
has problems resolving them ().
If your root filesystem does not mount with 'defaults' options, you will need to add the root filesystem's mount options to grub.conf with the kernel flag rootflags - initramfs does not pick up the options the way initrd used to.
e.g. if you mount your root with the flags data=journal,relatime then you would add to the end of the 'kernel' line in grub.conf: rootflags=data=journal,relatime .
After updating to dracut-004-4.fc12 or later, this kernel flag can be removed.
It is only possible to upgrade to Fedora 11 from an updated Fedora 10. Older systems must be upgraded to Fedora 10 first. The RPM format has been changed for Fedora 11, so the older rpmlib must be updated first.
Otherwise the process will fail with rpmlib(FileDigests) dependency problems. Support for the new format has been backported to Fedora 10 in an update.
yum update rpm
New initrd built when installing a new kernel while running Fedora 10 might fail. To solve that boot with an old kernel (to get the new userspace) and (re)install the new kernel.
Systems with PAE support (indicated by pae in /proc/cpuinfo) should use kernel-PAE.i686. The new kernel must be changed/installed manually: Set DEFAULTKERNEL=kernel-PAE in /etc/sysconfig/kernel and yum install kernel-PAE. Refer to
for details.
The yum update step should NOT be run inside a gnome desktop session/gnome-terminal.
could result in a unusable install when gnome-terminal segfaults during the upgrade. Update should be run in a vty, runlevel 3, or a screen session.
fedora-release-11-1.noarch changes the yum mirrorlist URL so that it uses a
"metalink", but the version of yum currently in F10 doesn't understand this syntax, leading to yum downloads failing with this error message:
YumRepo Error: All mirror URLs are not using ftp, http[s] or file.
Eg. &/metalink&/
Workaround is to manually edit the URL in /etc/yum.repos.d/fedora.repo as described at
Some packages in Fedora 10 are regarded as newer than those supplied by Fedora 11 and its updates repository. These include ntpd, ntpdate (, ), unique, unique-devel, eclipse-changelog, eclipse-svnkit and svnkit. You may wish to remove these before performing the upgrade, then reinstall them afterwards. Doing so may require --nodeps.
Some i386 packages in Fedora 10 are replaced with i586, i686 or x86_64 packages in Fedora 11. These include gpm.i386, glibc-2.9-3.i386. You may wish to remove these before performing the upgrade, then reinstall them afterwards. Doing so may require --nodeps.
mplayer-1.0-0.104.svn.fc10 from the RPM Fusion repository has a dependency on libfaad.so.0 that the depsolve doesn't find, but rpm_check_debug does. You may wish to remove mplayer before performing the upgrade, then reinstall them afterwards. Doing so may require --nodeps.
fedora-release packages can be found at rpm -Uvh
GDM starts on tty1 by default, not tty7.
anaconda by default now refers to encrypted devices by UUID, not by device name, to better handle device name changes. An encrypted device using partition /dev/sda1 with UUID 4- would now be called /dev/mapper/luks-4- instead of /dev/mapper/luks-sda1. You may wish to make the same changes on yo if you do, make sure to run mkinitrd afterwards.
If you use non-root encrypted devices, you will need to re-run mkinitrd for any older kernels that you want to still boot on the system.
It's been reported that there are problems with Pidgin i.e.:
pidgin-2.5.2-2.fc9.i386 from installed has depsolving problems - Error: Missing Dependency: libedataserver-1.2.so.9 is needed by package pidgin-2.5.2-2.fc9.i386 (installed)
the fix was to remove Pidgin
Check the )
After "the incident" you should use updated fedora-release packages from rpm -Uvh
If you are running as a xen Host (Dom0) you should not upgrade to Fedora 9.
Upgrading the thunderbird package will
. The current workaround is yu yum install thunderbird&.
If you are upgrading to Fedora 9 and use emacs, you must upgrade to the latest version of emacs for your prior release to ensure a clean upgrade. Fedora 8 users must have emacs-22.1-10.fc8 or later, while Fedora 7 users must have emacs-22.1-7.fc7.
Bug report .
Due to the switch from sysvinit to
, it is recommended that users who do an upgrade on a live filesystem to Fedora 9 reboot soon afterwards. If you do not reboot, you may want to take careful note of any '/etc/inittab.rpmsave' or '/etc/inittab.rpmnew' files. When rebooting after an upgrade then be aware that sysvinit that was used to start the system can't be used to shut it down.
You may find that after upgrading, you can no longer log in to GNOME. If this is the case, use ctrl-alt-F1 to access command prompt, then check the tail of .xsession-errors. If you see a comment like "(named color or font does not exist)", then you may be able to fix this using .
New pulseaudio and flash support packages must be installed manually:
yum groupinstall sound-and-video gnome-desktop (if you are using Gnome)
yum groupinstall sound-and-video kde-desktop (if you are using KDE)
yum install libflashsupport paman padevchooser
The Fedora 7 avahi packagag remove it manually with
rpm -e --noscripts avahi-0.6.17-1.fc7
On 64 bit machines (x86_64) you may have to remove some 32 bit libraries. For example dbus:
yum erase dbus.i386
You may find it easier to use the yum shell to stack these commands in a single transaction:
& erase dbus.i386
A lot of KDE packages are no longer multilib in F8. If you are on x86_64, you will need to erase the i386 versions of these packages by hand, like so:
yum erase kde{accessibility{,-devel},base,edu,graphics,multimedia{,-extras},network,sdk,utils{,-devel},webdev}.i386
Various other packages including Beryl are no longer in F8 and not obsoleted:
yum erase beryl\*
Fedora 7 replaces the old IDE subsystem with libata. Drive device names which previously started /dev/hd.. will become /dev/sd.. after the upgrade. /dev/hda1 will usually become /dev/sda1, although there may not be a direct relationship between the old and new device names (for example hdd does not necessarily become sdd). Before you reboot be sure to change all references to /dev/hd.. in your config, especially /etc/fstab - where it however may be simpler to refer to filesystems by label (check out the programs blkid, tune2fs, and mlabel). LVM Volume names are not affected. In /boot/grub/device.map change /dev/hd.. to /dev/sd.. before running grub-install - and don't change (hd0). Changing /boot/grub/grub.conf may also be required.
The libata layer represents all hard disks as SCSI disks, which are limited to 15 partitions in the kernel. IDE hard disks with more than 15 partitions are not supported in Fedora 7.
On a system which has been upgraded from releases prior to FC6 you may need to remove up2date and rhnlib rpm -e rhnlib up2date
If you see the message package gpm-1.20.1-84.fc6 (which is newer than gpm-1.20.1-83.fc7) is already installed when performing a yum update uninstall and reinstall the gpm package.
If you had installed Suns jre it might be removed during upgrade. Be aware that jre-6u1/jre-1.6.0_01-fcs requires compat-libstdc++-33.
If you get Error: Missing Dependency: python(abi) = 2.4 is needed by package libxml2-python and/or Error: Missing Dependency: python(abi) = 2.4 is needed by package rpm-python during your yum upgrade ensure you have done a yum clean all and check that both the base and updates repositories are available from your mirror. You will need the updates repo for the upgrade to succeed.
Since Fedora Core 6 uses python 2.4 and Fedora 7 uses python 2.5, do not try and run yum upgrade yum\* rpm\* before upgrading everything else - this succeeds but leaves yum in an unusable state.
After upgrading, you cannot use the DVD ISO loopback mounted as a repository directly (e.g. no baseurl=file:///mnt/fc6/) because the repodata files contain URLs of type media://
which yum can't handle.
You can use the loopback-mounted DVD for the initial upgrade from FC5 -& FC6, just not thereafter.
After removing the baseurl=file:/// option from your fedora-core.repo file, remember to yum clean all.
Before upgrading update your kernel first.
Make sure you have the latest kernel ABOVE 2.6.14 and uninstall all kernel versions before it, otherwise initscripts and a few other packages will conflict and prevent the ugprade. Use something like the command below
Install fedora-release in the Fedora Core 5 version. Check our
for a faster download.
Update your system
After upgrading, selinux permissions may be incorrect, causing interesting failures such as metacity not starting. As suggested below, to fix this, run touch /.autorelabel and reboot
make sure you're on the latest version of yum for FC3:
yum update yum
Download fedora-release for FC4:
rpm -Uvh /path/to/fedora-release-4-2.noarch.rpm
yum update ( This will start the upgradation process to FC4)
Once you have updated, run: yum groupinstall "GNOME Desktop Environment" (change GNOME to KDE if appropriate). That'll get you some new packages that were added in FC4 like Evince and NetworkManager.
Some new groups were added -
yum grouplist
- check out Eclipse and Java Development in particular.
Postgres database in FC4 has a newer incompatible format from the previous versions. Manual dump and restoration is required if you using this database. Look at the postgres documentation for more details on this.
kernel requires kernel-utils (or vice-versa) run:
yum update kernel
yum remove kernel-2.6.11\*FC3\*
yum upgrade
Takes forever and a day and hangs at:
Reading repository metadata in from local files
This means you have too much crap in your rpmdb and it's taking a while to go through it. Check out how many kernels you have installed: rpm -q kernel kernel-smp and remove the old ones you may also try running: rpm --rebuilddb and see if it helps any. I've found that removing old kernels and rebuilding the rpmdb helped this problem.
x86_64 upgrade requires removal of certain i386 packages before update
yum remove perl.i386
TODO: Add list of bonobo i386 packages to remove here
Error: Missing Dependency: libpython2.3.so.1.0 is needed by package koffice
koffice was removed from Fedora Core and not moved to extras - so there's no way to complete an upgrade to FC4
without removing it. run:
yum remove koffice
then your update should complete.
x86_64 systems seems to hang during "Running Transaction Test"
Seems related to bug
-- Maybe a update to the "rpm-4.3.3-3.0.fc3" (currently in updates-testing) might solve this. Ugly workaround (to be done as root):
: & /var/log/lastlog
GPG check fails with this message :
warning: rpmts_HdrFromFdno: V3 DSA signature: NOKEY, key ID db42a60e
public key not available for &some_package&
Retrieving GPG key from file:///etc/pki/rpm-gpg/RPM-GPG-KEY-fedora
The GPG key at file:///etc/pki/rpm-gpg/RPM-GPG-KEY-fedora (0x4F2A6FD2)
is already installed but is not the correct key for this package.
Check that this is the correct key for the &Fedora Core 4 - i386 - Base& repository.
Edit /etc/yum.repos.d/fedora.repo and replace the line
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-fedora
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY
SELinux gets messed up. I had to redownload the selinux-policy-targeted RPM from my mirror, do a forced uninstall of the old package, clean out the .rpmnew and .rpmsave files then install the new policy. Then I had to run "/sbin/fixfiles relabel" and wait. If I didn't do that, I found I couldn't log in.
If SELinux does give you problems, it can be disabled on bootup by pressing "a" on the grub bootup menu, then adding "enforcing=off" to the arguments list.
RPM complains about missing diskspace, but there is a lot free. If you are really sure your diskspace is enough, set
diskspacecheck=0
&/code& in &code&/etc/yum.conf&/code&.
The RPM transaction will need a lot of diskspace temporarily (much more than one might think), so be careful.
Don't forget to remove that later after the upgrade.
* Yum complains about files conflicting in the GCC package.
This system was upgraded from Fedora Core 1.
Remove the gcc32 package:
sudo rpm -e gcc32
Some of your modules don't load after the upgrade.
When you investigate modprobe doesn't work as expected.
Run depmod:
sudo depmod -ae -F /boot/System.map-[your &code&uname -a&/code& kernel version here]
Yum has been reported to be hanging after upgrading. Updating the pysqlite package might fix it.
Go here for most of this info:
Just Upgrade using anaconda - save yourself a world of pain. But if you really want to try, there's these hints by Seth Vidal:
Copyright & 2016 Red Hat, Inc. and others.
All Rights Reserved.
For comments or queries, please .
The Fedora Project is maintained and driven by the community and sponsored by Red Hat.
This is a community maintained site.
Red Hat is not responsible for content.
This page was last modified on 30 May 2015, at 14:09.