2016年1月 总版技术专家分月排行榜第二2015年11月 总版技术专家分月排行榜第二2015年10月 总版技术专家分月排行榜第二
优秀小版主
匿名用户不能发表回复！|Howdy, Stranger!
It looks like you're new here. If you want to get involved, click one of these buttons!
Categories
Due to continual spamming, forum registrations are now by Invitation Only. Hopefully this will be only a temporary measure to combat spammers.
If you want an invitation contact forumapplication @ camstudio . org
Sorry for the inconvenience.
File Creation Error. Unable to rename/copy audio file
I seem to get the message File Creation Error. Unable to rename/copy audio file. I have all the original/default settings but I enabled auto-pan and it's speed is either 19 or 20. I am only using a microphone to record sound. It seems that anything 4:30 or longer makes this error.
What version of Windows are you running and where are you trying to save the completed video?
Is Name of AVI file (in Options & Program Options) set to Automatic file naming?Windows Update Codes
My grateful thanks go to Eric Brodish of Microsoft Redmond for providing this
very comprehensive list of Windows Update error codes!!
Error Code
Dec Error Code
Error String
Description
ERROR_INVALID_FUNCTION
0x0000007B
Error_Invalid_Name
The filename, directory name,or volume label syntax is incorrect
Error_cant_enable_Deny_only
A group marked use for deny only can not be enabled
0x0000041D
ERROR_SERVICE_REQUEST_TIMEOUT
The service did not respond to the start or control request in a timely
Error_Session_Credential_Conflict
Multiple connections to a server or shared resource by the same user,using
more than one user name, are not allowed.&
Error_Dup_Domainename
The workgroup or domain name is already in use by another computer on the
error_Invalid_HW_Profile
The specified hardware profile configuration is invalid
Error_Install_Service_failure
The Windows Installer Service could not be accessed. This can occur if you
are running Windows in safe mode, or if the Windows Installer is not
correctly installed.
ERROR_INSTALL_FAILURE
Fatal error during installation
ERROR_INSTALL_ALREADY_RUNNING
Another installation is already in progress. Complete that installation
before proceeding with this install.
EPT_S_Not_Registered
There are no more endpoints available from the endpoint mapper.
RPC_X_BYTE_Count_TOO_Small
The byte count is too small
NERR_BADPasswordCore
This share name or password is invalid
0x00000BC2
Error_Success_Reboot_Required
0x00000C0B
0x00000CC4
0x00000D47
0x00000E5C
0x00000E74
0x0000109F
Error_No_Media_In_Drive
No media in drive
0x0000117A
Error_Shutdown_IS_Scheduled
A system shutdown has already been scheduled
Error_Port_Unreachable
No Service is operating at the destination network endpoint on the remote
Error_Wrong_Target_Name
Logon failure: The target account name is incorrect.
Error_Cluster_restype_Note_Supported
The specified node does not support a resource of this type. This amy be due
to version inconsistancies or due to the absence of the resource DLL on this
Error_Invalid_Showwin_Command
Cannot show or remove the window in the way specified
0x000018BE
0x00001AD4
0x00001ADA
0x00001C70
0x00001CE8
0x00001D7A
0x00001F1D
0x00001F59
0x0000229A
0x000022CA
0x0000230B
0x00002ABF
0x00002BBE
0x00002D49
0x00002DA4
0x00002DDC
0x00002EBD
0x00002ED7
0x000035DD
0x000037FA
0x0000384E
0x0000399D
0x00003A5C
0x00003D16
0x00003E44
0x000040CF
0x0000433D
0x000044CC
0x0000471E
0x00004A65
0x00004BF9
0x00004CC2
0x00004D2D
0x00004DB8
0x00004E90
0x00004FA2
0x000051CF
0x0000530C
0x0000556E
0x000055BC
0x00005A6A
0x00005AA5
0x00005C0E
0x00005FE9
0x0000626E
0x0000651F
0x000065AA
0x000065BA
0x00006F50
0x00007B86
0x00007C12
0x00007C78
0x00007CE1
0x00007D12
0x00007DFF
0x00007EC9
0x00007F83
0x00007FCC
0x0000F06A
0x0000F06B
0x0000F0DA
WU_S_SERVICE_STOP
Service stopped
Agent selfupdates
WU_S_UPDATE_ERROR
Overall operation completed but error occurred while processing one or more
specified updates.
WU_S_MARKED_FOR_DISCONNECT
The caller attempted to disconnect an operation but the operation is busy
calling back so the callback is marked for disconnect later
WU_S_REBOOT_REQUIRED
The system needs to be rebooted to complete installation.
SUS_S_ALREADY_INSTALLED
The update to be installed is already installed
WU_S_ALREADY_UNINSTALLED&
The update to be uninstalled is already not installed.
WU_S_ALREADY_DOWNLOADED
The update to be downloaded is already downloaded
E_Nointerface
Invalid pointer
Operation Aborted
CO_E_WRONG_SERVER_IDENTITY
The security descriptor on the BITS service was changed by a security
template such that NetworkService account doesn’t have READ access to BITS
0x8000FFFF
E_UNEXPECTED
RPC_E_SYS_CALL_FAILED
RPC_E_Serverfault
RPC_E_Disconnected
REGDB_E_CLASSNOTREG
BITS in Windows 2000 is dependent on SENS and EventSystem services. If COM+
catalog is corrupted, one of these errors was seen.
CO_E_Classstring
0x800401FD
CO_E_Objnotconnected
Object is not connected to server
EVENT_E_INTERNALERROR
There will be event messages in Application/System log regarding the errors.
ERROR_INVALID_FUNCTION
ERROR_FILE_NOT_FOUND
The System cannot find the file specified
COR_E_DIRECTORYNOTFOUND
The specified path couldn't be found - ALLUSERSPROFILE Microsoft network dir
doesn’t exist
ERROR_ACCESS_DENIED&
The authentication method is not supported. -
CoCreateInstance(IBackgroundCopyManager) fails with E_ACCESSDENIED
(0x) in this condition
Handle not valid error
ERROR_NOT_ENOUGH_MEMORY&
The system is out of memory.
0x8007000B
COR_E_BADIMAGEFORMAT
The format of the DLL or executable being loaded is invalid
0x8007000D
Error_invalid_data
0x8007000E
E_OUTOFMEMORY
Data error (cyclic redundancy check).
0x8007001F
ERROR_GEN_FAILURE
A device attached to the system is not functioning
STIERR_SHARING_VIOLATION
The process cannot access the file because it is being used by another
ERROR_NOT_SUPPORTED
ERROR_FILE_EXISTS
ERROR_CANNOT_MAKE
The directory or file cannot be created
ERROR_INVALID_PARAMENTER - E_INVALIDARG
One or more arguments are not valid error - Invalid proxy server name was
specified in the user’s IE settings and hence WinhttpSetProxySettings call
fails with E_INVALIDARG error. BITS puts the job in TRANSIENT_ERROR with the
same error code. For ex, if the proxy server is set to
http://foo/bar/proxy.pac, this error will be seen. This error is also seen
when credentials are supplied such that scheme is not NTLM/Negotiate, but
username/password is NULL, since that is not valid (WinhttpSetCredentials
fails with E_INVALIDARG. BITS 1.5 puts the job into ERROR state with
BG_E_INVALID_RESPONSE in the above 2 cases, because of error code mapping
E_INVALIDARG is always mapped to (BG_E_INVALID_SERVER_RESPONSE)
ERROR_DISK_FULL
There is not enough space on the disk
0x8007007A
ERROR_INSUFFICIENT_BUFFER
0x8007007B
STIERR_INVALID_DEVICE_NAME
0x8007007E
ERROR_MOD_NOT_FOUND
The specified module could not be found.&
0x8007007F
ERROR_PROC_NOT_FOUND
The specified procedure could not be found.&
ERROR_WAIT_NO_CHILDREN
&There are no child processes to wait for
ERROR_BAD_PATHNAME
ERROR_INVALID_ORDINAL
ERROR_BAD_EXE_FORMAT
&is not a valid Win32 application
Error_Pipe_Busy
All pipe instances are busy
ERROR_NO_MORE_ITEMS:
0x8007010B
ERROR_DIRECTORY
The directory name is invalid
0x8007012E
Error_Disk_Too_Fragmented
Error_Invalid_Address
Error_Operation_Aborted
The I/O operation has been aborted because of either a thread exit or an
application request
ERROR_IO_PENDING
Error_Noaccess& to memory location
Invalid access to memory location
Error_Swaperror
Error performing inpage operation
0x800703EB
Error_Can_Not_Complete
Cannot complete this function
0x800703Ed
ERROR_UNRECOGNIZED_VOLUME
The volume does not contain a recognized file system
ERROR_NO_TOKEN
An attempt was made to reference a token that does not exist
0x8007041D
ERROR_SERVICE_REQUEST_TIMEOUT
The service did not respond to the start or control request in a timely
0x8007041E
Error_Service_No_Thread
A thread could not be created for this service
0x8007041F
ERROR_SERVICE_DATABASE_LOCKED
The service database is locked
ERROR_SERVICE_DISABLED
The service cannot be started. If BITS service is disabled by the
Administrator, then this error will be seen.
ERROR_SERVICE_DOES_NOT_EXIST
ERROR_SERVICE_NOT_ACTIVE
The service has not been started
0x8007042B
ERROR_PROCESS_ABORTED
0x8007042C
Error_Service_Dependency_Fail
ERROR_SERVICE_DEPENDENCY_DELETED
Error_Different_Service_Account
0x8007043B
ERROR_SERVICE_NOT_IN_EXE
0x8007045A
ERROR_DLL_INIT_FAILED
0x8007045B
ERROR_SHUTDOWN_IN_PROGRESS
E_PROP_ID_UNSUPPORTED
Permission denied / [Problem initializing or using session variables] or
Element not found
ERROR_CANCELLED
Cancelled by user
0x800704DD
Error_Not_Logged_On to network
Error_Stack_Buffer_Overrun
The system detected an overrun of a stack-based buffer in this application
ERROR_FILE_CORRUPT
0x8007057F
Error_Cannot_Find_WND_Class
Cannot find windows class
0x8007058D
Error_Control_ID_Not_Found
0x800705AA
ERROR_NO_SYSTEM_RESOURCE
Insufficient system resources exist to complete the requested service
0x800705AD
Error_Working_Set_Quota
Insufficient quota to complete the requested service
0x800705AF
ERROR_COMMITMENT_LIMIT
The paging file is too small for this operation to complete
Error_Timeout
ERROR_INSTALL_FAILURE
ERROR_INSTALL_ALREADY_RUNNING ErrorClientUpdateInProgress
0x8007066A
Error_Patch_Target_Not_Found
The program to be upgraded may be missing or the patch may upgrade a
different version of the program
RPC_S_Invalid_Binding
Terminal Services optional component is installed on the machine, but the
“Terminal Services” service has been disabled.
RPC_S_Unknown_IF
Eventlog service is not running. BITS tries to initialize the event logger
object during initialization and fails to start, if the initialization
fails. If event log service is not running, then the initialization fails
with RPC_S_UNKNOWN_IF error
0x800706BA
RPC_S_SERVER_UNAVAILABLE
0x800706BB
RPC_S_SERVER_TOO_BUSY
The RPC server is too busy to complete this operation
0x800706BE
RPC_S_CALL_FAILED
0x800706BF
PRC_S_Call_Failed_DNE
RPC_S_Invalid_Bound
The array bounds are invalid
RPC_X_Bad_Stub_Data
This can occur after a control selfupdate that has not fully completed and
requires a reboot. The controls may need to be reregistered.
Error_Unknown_Port
0x80070BC2
ErrorControlRebootRequired
0x8007276b
WSASYSNOTREADY
The description of WSASYSNOTREADY says WSAStartup cannot function at this
time because the underlying system it uses to provide network services is
currently unavailable. It seems that something is wrong with networking
components on the system.
0x8007277B
WSASYSCALLFAILURE
A system call that should never fail has failed
0x80072AF9
WSAHOST_NOT_FOUND
0x80072AFC
WSANO_DATA
0x80072EE2
The request has timed out.
0x80072EE4
ERROR_INTERNET_INTERNAL_ERROR
An internal error has occurred.
0x80072EE5
Error_Internet_Invalid_URL
0x80072EE6
ERROR_INTERNET_UNRECOGNIZED_SCHEME&
The URL scheme could not be recognized or is not supported.
0x80072EE7
ERROR_INTERNET_NAME_NOT_RESOLVED&
The server name could not be resolved.
0x80072EEF
ERROR_INTERNET_LOGIN_FAILURE
0x80072EF1
ERROR_INTERNET_OPERATION_CANCELLED
0x80072EF2
Error_Internet_Incorrect_handle_type
0x80072EF3
Error_Internet_Incorrect_Handle_State
0x80072EFD
ERROR_INTERNET_CANNOT_CONNECT&
The attempt to connect to the server failed.
0x80072EFE
ERROR_INTERNET_CONNECTION_ABORTED&
The connection with the server has been terminated.
0x80072F0C
Error_Internet_Client_Auth_Cert_Needed
0x80072F0D
ERROR_INTERNET_INVALID_CA
0x80072F76
The requested header could not be located
0x80072F78
ERROR_HTTP_INVALID_SERVER_RESPONSE&
The server response could not be parsed.
0x80072F7c
ERROR_HTTP_REDIRECT_FAILED
0x80072F83
ERROR_INTERNET_DISCONNECTED
0x80072F8c
ERROR_INTERNET_NOT_INITIALIZED
0x80072F8F
ERROR_INTERNET_SECURE_FAILURE&& ErrorClockWrong
One or more errors were found in the Secure Sockets Layer (SSL) certificate
sent by the server.
Error_SXS_Cant_gen_Actctx
This application has failed to start because the application configuration
is incorrect.
STATUS_FAILED_LANGUAGE_TYPE
Setup cannot update your& files because the language\installed on your
system is different from the update language.
STATUS_CHECKED_FREE_MISMATCH
&Setup cannot update a checked (debug) system with a free (retail) version
of , or vice versa.
STATUS_NOT_ENOUGH_SPACE
There is not enough disk space on to install . Setup requires a minimum of d
additional megabytes of free space or if you also want to archive the files
for uninstall, Setup requires d additional megabytes of free space. Free
additional sp
STATUS_INSUFFICIENT_PRIVS
You do not have permission to update . Please contact your system
administrator.
STATUS_CANT_FIND_INF
Setup could not find the update.inf file needed to update your system.
STATUS_UPDATE_SUCCESSFUL
&has been updated. Remove any disks from the floppy disk drives and choose
OK to restart your computer. If you change or add any components to your
system, you will need to reapply the Hotfix.
STATUS_UPDATE_UNSUCCESSFUL
&installation did not complete.
0x8007F00a
STATUS_SHUTDOWN_UNSUCCESSFUL
&Setup was unable to shutdown system. Please shutdown your system manually.
0x8007F00B
STATUS_FILE_NOT_FOUND_IN_SETUP_LOG
Could not locate entry for HAL.DLL in SETUP.LOG to determine type of HAL to
0x8007F00C
STATUS_INVALID_INF_FILE
The file is not correct.
0x8007F00d
STATUS_USER_CANCELLED
&Setup canceled.
0x8007F00E
STATUS_PLATFORM_MISMATCH
This& is for a different hardware platform.
0x8007F00f
STR_CAPTION
STR_WARNCAPTION
&Setup Warning
STR_ERRCAPTION
&Setup Error
STR_FAILED_TO_DELETE_OR_RENAME
The file& is open or in use by another application. Close all other
applications and then click Retry.
STR_FAILED_TO_SAVE_REGISTRY
&Setup could not backup registry key& to file
STR_FAILED_TO_READ_REGISTRY
&Setup could not backup registry value
STR_ASK_DIRTY_UNINSTALL
&Select ''OK'' to undo the changes that have been made, or select ''Cancel''
to quit. If you select ''Cancel'', your system will be left in a partially
updated state and may not work correctly.
STR_LEAVING_DIRTY
&has been partially updated and may not work properly.
STR_ARE_YOU_SURE_CANCEL
Are you sure you want to cancel?
STR_SOURCE_MEDIA_NAME_UNINSTALL
& Uninstall Directory
STR_SOURCE_MEDIA_NAME
& Uninstall Directory
0x8007F01a
STR_SOURCE_MEDIA_NAME_SYSTEM
&System Files
0x8007F01b
STR_INST_HOTFIX
&Setup found hotfixes on your system. Would you like to install these
hotfixes now?&
0x8007F01c
STR_UNINST_ALREADY_CREATED
You have already created an Uninstall directory. Doing this again will
overwrite your current uninstall directory. Are you sure you want to do
0x8007F01d
STR_OEM_FILE
Your computer vendor installed this file on your computer. Do you want&
Setup to replace this file?
0x8007F01e
STR_CATALOG_INSTALL_FAILED
Failed to install catalog files.&
0x8007F01f
STR_ADD_REGISTRY_FAILED
Failed to add registry entry.&
STATUS_BUILD_VERSION_MISMATCH
Setup has detected that the build version of the system installed does not
match the update you are applying to it. You can only install this update
only on Build %d .
STATUS_SP_VERSION_GREATER
The version of Windows you have installed does not match the update you are
trying to install.
STATUS_CANT_SPAWN_HOTFIX
&Setup could not start the hotfix installation program.
STATUS_CANT_FIND_TAG
&Setup could not locate the& files.
STATUS_OVERWRITE_UNINSTALL
WARNING: You have chosen to overwrite your existing uninstall:& If you
continue, you will only be able to uninstall to the following Service Pack
version:& Are you sure you want to continue? Click Yes to continue creating
STATUS_WININET_LOAD_FAILED
This Web-based update requires Internet Explorer 3.0 or later. For
instructions on how to download a version of this update that does not
require a Web connection during installation, download and install& from
http://www.Microsoft.com/Downloads
STATUS_CANT_INSTALL_SP_ON_DTC
This& has not been qualified by your hardware vendor for installation on
this copy of& Datacenter Server. Please contact your hardware vendor for
additional information on obtaining a& that has been qualified for your
system configuration.
STATUS_NECESSARY_FILES_NOT_PRESENT
Not all files necessary to perform an integrated installation are present.
STATUS_SPOOLER_NOT_STARTED
Cannot install . The Print Spooler service is not started.
0x8007f02a
STATUS_MUST_RESTART_FIRST
The system must be restarted before installing the , to allow some prior
file update operations to complete. (These operations were previously
scheduled by some other install or uninstall operation.)
0x8007f02b
STATUS_NOT_ENOUGH_WITH_UNINST
You do not have enough free disk space on % to archive the uninstall files.
To install& with backup files for uninstall, an additional dMB is required.
0x8007f02c
STATUS_CANT_FIND_RSAENHS
Unable to locate RSAENHS.DLL in the update directory, high encryption for
uninstall aborted.
0x8007f02d
STATUS_CANT_FIND_ENCININF
Unable to locate UPDENCIN.INF in the update directory, high encryption for
uninstall aborted.
0x8007f02e
STATUS_CANT_FIND_ENCTSINF
Unable to locate UPDENCTS.INF in the update directory, unable to export TS
0x8007f02f
STATUS_ENCINST_PROCESS_FAILED
High encryption ENCINST process failed.
STATUS_ENCINST_UPGRADE_FAILED
High encryption upgrade failed.
STR_USAGE_UPDATE
AVAILABLE SWITCHES: [/help] [/quiet] [/passive] [/uninstall] [/norestart]
[/forcerestart] [/l] [/n] [/o] [/f] [/integrate:&path&] [/d:&path&] /help
Displays this message SETUP MODES /quiet Quiet mode (no user interaction or
STR_BUILDING_CAB
Creating file&
STR_DOWNLOADING
Downloading files and patches
STR_ARCHIVING_FILES
Backing up files
STR_ARCHIVING_FILE
Backing up files
STR_INSTALLING_FILES
Installing files
STR_INSTALLING_FILE
Installing files
STR_FINISHING_INSTALL
Finishing installation
STR_WELCOME_LINE
Welcome to the&& Setup Wizard
0x8007f03a
STR_RESTART
0x8007f03b
STR_COMPLETE
&installation is complete. You must restart your computer for the& update to
take effect.
0x8007f03d
STR_CANT_CANCEL_NOW
Please wait while& Setup updates your system files.
0x8007f03e
STR_MUST_ACCEPT_TIP
Must accept license agreement before installing
0x8007f03f
STR_NEED_TO_CONNECT
&Setup needs to connect to the internet now to download& files and patches
for installation.
STR_READY_TO_REPLACE
&Setup is ready to begin replacing system files.
STR_CONNECTING
Connecting to&
STR_CONNECTED
Connected to&
STR_ESTIMATE
STR_MINUTES
STR_SECONDS
STR_DOWNLOAD_REMAINING
KB remaining
STR_DOWNLOAD_COMPLETE
Download complete
STR_DOWNLOAD_UNPACKING
Download complete, now unpacking files
STR_DOWNLOAD_FAILURE
The following error occurred while& Setup attempted to download the& files
from the Internet:&
0x8007f04a
STR_UNKNOWN_ERROR
The server did not respond (error code %d).
0x8007f04b
STR_INTERNET_TIMEOUT
The server did not respond.
0x8007f04c
STR_DOWNLOAD_RETRY_TEXT
0x8007f04d
STR_HASH_FAILURE_1
&Setup determined that the following downloaded& file is corrupt:&
0x8007f04e
STR_HASH_FAILURE_2
&Setup determined that the following downloaded& files are corrupt:&
0x8007f04f
STR_DOWNLOAD_GIVE_UP
&Setup was unable to download all the& files necessary for installation.&
STR_COPYING_FILE_DELAYED
Copied file (delayed)
STR_ERROR_COPY_SLIP
An error has occurred copying files from the Service Pack share to the
distribution share.
STR_SLIPSTREAM_SUCCESSFUL
Integrated install has completed successfully.
STR_SLIPSTREAM_FAILED
Failed to copy some or all of the files necessary for integrated install.
Please check that: a) No network or copy errors occurred during the
integration process b) The format of the destination directory is correct.
The files to be integrated
STR_SVCPACK_CMD
Service Pack started with following command line
STR_DOWNLOAD_SIZE
&bytes downloaded.&
STR_NO_SVCPACK
No Service Pack
STR_MISSING_FILE
The file is missing from the& installation. The file must be present for&
Setup to continue. Press OK to cancel Setup.
STR_READY_TO_ENCINST
&Setup is ready to begin upgrade of uninstall to high encryption.
STR_SLIPSTREAM_LANGUAGE_MISMATCH
Integrated install failed. The language type or platform for the destination
directory and& must be the same.&
0x8007f05a
STATUS_CANT_OPEN_LOG
Error opening& file
0x8007f05b
STR_SKIPPING_FILE
Skipped copying file:
0x8007f05c
STR_COPY_FILE
Copying file&
0x8007f05d
STR_SVC_INFO
In order to successfully complete this installation, the following services
will automatically be stopped and re-started.
0x8007f05e
STR_SVC_STOP_ERR
Setup was unable to stop the following service
0x8007f05f
STR_SVC_ASKREBOOT
A reboot will probably be required in order to successfully complete this
installation. Do you wish to continue?
STR_SVC_START_ERR
Setup was unable to re-start the following service: .
ERR_STD_PREFIX
&Setup encountered an error:
STR_COPYING_FILE
Copied file:
STR_SPAWNING_PROCESS
Starting process:
STATUS_INVALID_VER_FILE
The update.ver file is not correct.
STR_DOMESTIC_TAG1
US/Canada Only, Not for Export
STR_DOMESTIC_TAG2
Domestic Use Only
STR_DOMESTIC_TAG3
US and Canada Use Only
0x8007f06a
STATUS_SP_VERSION_GREATER_1
Setup has detected that the Service Pack version of the system installed is
newer than the update you are applying to it. You can only install this
update on Service Pack.
0x8007f06b
STATUS_SP_VERSION_GREATER_2
Setup has detected that the Service Pack version of this system is newer
than the update you are applying. There is no need to install this update.
0x8007f06c
STATUS_FPNW_FIXUP_FAILED
Setup failed to access or correctly modify your SETUP.LOG file.
0x8007f06d
STATUS_WRONG_PLATFORM
The version of software you are running does not match the system you are
running it on.
0x8007f06e
STATUS_FAILURE_COPYING_FILES
Failed to completely copy all of the updated files.
0x8007f06f
STATUS_FAILED_TO_SET_DIR
Failed to set the directory.
STATUS_SETUP_ERROR
An error in updating your system has occurred.
STATUS_SUCCESS_NOREBOOT
&has been updated. You must reboot for these changes to take effect. If you
change or add any components to your system, you will need to reapply the
STATUS_SP_VERSION_LESSER
Setup has detected that the version of the Service Pack installed on your
system is lower than what is necessary to apply this hotfix. At minimum, you
must have Service Pack installed.
STATUS_NO_UNINSTALL_AVAILABLE
You cannot uninstall, since an uninstall for& has not been created.
0x8007f07a
STATUS_SUCCESS_NOREBOOTNEC
&has been updated. If you change or add any components to your system, you
will need to reapply the Hotfix.
0x8007f07b
STATUS_UNINST_NOREBOOTNEC
&Hotfix successfully uninstalled.
0x8007f07c
STR_SECURITY_PROVIDER_WARNING
The existing file& contains High Encryption security, but the updated Hotfix
file& contains only Standard Encryption security. You can choose to replace
the High Encryption security file with the updated Standard Encryption
security file now.
0x8007f07f
STR_UNINST_HOTFIX
Hotfixes have been found on your system. Would you like to Uninstall these
hotfixes now?&
STR_OLD_UNINST_EXISTS
STR_LICENSE_DECLINED
You have chosen to decline the License Agreement. Setup cannot continue.&
STR_NO_LICENSE_TXT
No LICENSE.TXT file was found in your Hotfix directory. Setup cannot
continue.&
STR_INSUFF_RESOURCES
Insufficient resources are available. Setup cannot continue.&
STR_FILE_READ_ERROR
Error reading LICENSE.TXT file. Setup cannot continue.&
STR_DELETE_OLD_UNINST
This old uninstall directory cannot be used to uninstall this Hotfix, and
should be deleted. Would you like to delete it now?&
STR_HOTFIXES_FOUND
The following hotfixes are installed:&
STR_HOTFIXES_NOT_FOUND
No Hotfixes are installed.&
STR_CAT_VERSIONS_EQUAL
Catalog file versions are equal, although catalog files differ. Install
package must be rebuilt. Failed to install catalog file.&
STR_WINDOWS_TYPE1
Windows NT 4.0
0x8007f08a
STR_WINDOWS_TYPE2
Windows 2000
0x8007f08b
STR_LICENSE_AGREEMENT
License Agreement
0x8007f08c
STR_SELECT_OPTIONS
Select Options
0x8007f08d
STR_UPDATING_YOUR_SYSTEM
Updating Your System
0x8007f08e
STR_WIZ1_STATIC3
Before you install this update, we recommend that you: - Update your system
repair disk - Back up your system - Close all open programs To complete this
installation, Windows might require restarting after you finish this wizard.
0x8007f08f
STR_WIZ2_STATIC1
Please read the following license agreement. To continue with setup, you
must accept the agreement.
STR_WIZ2_RADIO1
I &Do Not Agree
STR_WIZ2_RADIO2
STR_ASK_BACKUP
If you want to remove& later, Setup must archive the necessary files.
However, this requires significant disk space. Do you want Setup to archive
these files?
STR_ARCHIVE1
&Archive Files
STR_ARCHIVE2
&Do Not Archive Files
STR_WIZ4_STATIC2
Please wait while setup inspects your current configuration, archives your
current files and updates your files.
STR_WIZ4_STATIC_OPERATION
Inspecting your current configuration
STR_WIZ4_STATIC_DETAILS
inspecting current configuration, archives your current files and updates
your files
STR_WIZ4_STATIC
Inspecting current configuration, archives your current files and updates
your files
STR_WIZ5_STATIC1
Completing the&& Setup Wizard
0x8007f09a
STR_WIZ5_STATIC2_REBOOT
You have successfully completed the& Setup Wizard. To apply the changes, the
wizard has to restart Windows. To restart Windows automatically, click
Finish. If you want to restart later, select the Do not restart now check
box, and then click Fin
0x8007f09b
STR_WIZ5_STATIC2_NOREBOOT
You have successfully completed the& Setup Wizard. To close this wizard,
click Finish.
0x8007f09c
STR_WIZ5_CHECK1
&Do not restart now
0x8007f09d
STR_WIZCAPTION
& Setup Wizard
0x8007f09e
STR_ANALYZE_DISK
Checking for necessary space
0x8007f09f
STR_BUILDING_CAB_CAPTION
Creating Cabinets
STR_CLEAN_REG
Updating the registry keys
STR_CANCEL
STR_DOWNLOAD_UNPACKING_DETAILS
Unpacking: %d remaining
No LICENSE.TXT file was found in your Hotfix directory. Setup cannot
continue. ::No Uninstall directory: Setup is executing. Please wait for
Setup to complete :No Service Pack
STR_README
Read Me:readmesp.htm
STR_README_FILE
readmesp.htm
STR_SLIPSTREAM_EVAL_DESTINATION
Integrated install failed. The destination directory contains an evaluation
copy of Windows.&
STR_WINDOWS_TYPE3
Windows XP
STR_NOUNINSTALL
No Uninstall directory
STR_SRVPACK
Service Pack
0x8007f0aa
STR_WINDOWS_TYPE0
0x8007f0ab
STR_SPOOLER_ENABLE
For Setup to continue, the print spooler service must be enabled on this
computer. To enable this service, click OK. After Setup is complete, the
print spooler will be disabled.
0x8007f0ac
STR_USAGE_UPDATE_NOSLPSTRM
AVAILABLE SWITCHES: [/help] [/quiet] [/passive] [/uninstall] [/norestart]
[/forcerestart] [/l] [/n] [/o] [/f] [/integrate:&fullpath&] /help Displays
this message SETUP MODES /quiet Quiet mode (no user interaction or display)&
0x8007f0ad
Verdana Bold
0x8007f0ae
STR_CHOOSE_UNINST_DIR
Select an existing folder or make a new folder in which to store uninstall
information.
0x8007f0af
STR_ARCHIVE_DRIVE_INVALID
You have selected a folder that is not on your local computer. The current
state of the computer can be archived only on your local computer.
STR_STARTING_SERVICES
Starting services
STR_STARTING_SERVICE
Starting service&
STR_STOPPING_SERVICES
Stopping services
STR_STOPPING_SERVICE
Stopping services
STR_WINDOWS_TYPE4
Windows Server 2003
STR_BLOCKLIST_HF_MSG
Setup cannot install this hotfix because one or more of its files are out of
date. Please download and install the latest version of fix .
STR_BLOCKLIST_SP_MSGA
This service pack contains files that are missing some of the fixes which
were previously installed on this computer. To prevent possible problems,
these files will not be installed by the service pack.
STR_BLOCKLIST_SP_MSGB
In order to have the fixes contained in both the service pack and the
previously installed hotfixes, you must obtain and install the updated
versions of the following hotfixes prior to or following the service pack
installation. These hotfixes are also
STR_BLOCKLIST_SP_MSGC
Do you want to continue installing this service pack?
STR_BLOCKLIST_SP_MSGD
The service pack install cannot continue until these hotfixes are applied to
your system.
STR_GENERALCAPTION
STATUS_BUILD_VERSION_MISMATCH2
Setup has detected that the build version of the system installed does not
match the update you are applying to it. You can only install this update
only on Build %d .
STR_SLPSTRM_COPY
Integrating files
STR_SLPSTRM_WIZ4_STATIC2
Please wait while setup integrates files from Windows Service Pack into your
Windows installation folder.
STR_SLPSTRMUPDATING_YOUR_SYSTEM
Updating Your Windows Share
0x8007f0ca
STR_RESTORE_POINT_DESC
Installed& .
0x8007f0cb
STATUS_VLK_BLOCKED
The Product Key used to install Windows is invalid. Please contact your
system administrator or retailer immediately to obtain a valid Product Key.
You may also contact Microsoft Corporation's Anti-Piracy Team by emailing
0x8007f0cc
STATUS_KERNEL_NONSTD
The core system file (kernel) used to start this computer is not a Microsoft
Windows file. The Service Pack will not be installed. For more information,
see Knowledge Base article& at http://support.microsoft.com.
0x8007f0cd
STR_VLK_CHECK
Checking product key
0x8007f0ce
STR_SET_RESTOREPOINT
Creating restore point
0x8007f0cf
STR_PERFORM_INVENTORY
Performing inventory
STR_BUILD_THIRDPARTYDRIVERS
Creating Third Party Driver List
STR_DISK_USAGEFORINSTALL
Estimating space for installation
STR_DISK_USAGEFORUNINSTALL
Estimating space for uninstallation
STR_PROCESSES_BEFOREARCHIVE
Running processes before install
STR_REGISTRY_BACKUP
Backing up registry
STR_PROCESSES_AFTERINSTALL
Running processes after install
STR_PERFORM_CLEANUP
Performing cleanup
STR_OPTIONAL_EXCLUSIONWARNING
Windows& has detected that one or more protected files on your computer have
been modified. The Service Pack contains updated versions of those files,
which work to provide a stable environment for your programs. If you click
Yes, the updated version
STR_WIZ1_STATIC3_XP
Before you install this update, we recommend that you: - Back up your system
- Close all open programs To complete this installation, Windows might
require restarting after you finish this wizard.
STR_ARCHIVE_FOLDER_INVALID
The folder name is longer than the limit of 226 bytes. Enter a shorter name.
0x8007f0da
STR_FAILED_INF_INTEGRITY
Setup could not verify the integrity of the file Update.inf. Make sure the
Cryptographic service is running on this computer.
0x8007f0db
STR_BLOCKLIST_FIXNUMBER
Fix Number
0x8007f0dc
STR_BLOCKLIST_FILENAME
0x8007f0dd
STR_BLOCKLIST_VERSION
0x8007f0de
STR_WIZ4_NOARCHIVE
Please wait while setup inspects your current configuration and updates your
0x8007f0df
STATUS_SP_BUILD_TO_BUILD
This Service Pack cannot be installed on top of the& build currently
installed on your computer. Cancel this installation process, uninstall your
current& build, then re-install this Service Pack.
STR_UNABLE_TO_VERIFY
Setup could not verify the integrity of one or more installed files.
STR_ERR_PRINT_EULA
Unable to print the END USER LICENSE AGREEMENT
STR_WINDOWS_TYPE
Windows, Windows NT 4.0, Windows 2000, Windows XP, Windows Server 2000,
Windows XP Version 2003
STATUS_WINDOWS_VERSION_NEWER
The version of Windows you have installed is newer than the update you are
trying to install. There is no need to install this update.
STATUS_PACKAGE_NOT_APPLICABLE
This package does not apply to the operating system you are running, and
therefore cannot be installed.
STR_SAFEMODE_INSTALL
You are trying to install while the system is in safe mode. This is not
recommended unless the system does not function in normal mode.&
STR_APPLYING_HOTPATCHES
Applying Hotpatches
STATUS_INVALID_BRANCHES_INF
The branches.inf file is invalid.
STATUS_INVALID_UPDATEBR_INF
The updatebr.inf file is invalid.
0x8007f0ea
STR_PACKAGE_MIGRATE_FAILED
Failed to migrate dependent packages.&
0x8007f0ec
STR_PERFORM_MIGRATION
Performing migration
0x8007f0ed
STATUS_NO_BRANCH_AVAILABLE
Required installation branch was not found in INF file.
0x8007f0ee
STR_BLOCKLIST_PACKAGE
0x8007f0ef
STR_MIGRATE_BLOCKLIST_MSG
The installation cannot continue because the following packages might not be
STR_BRANCH_CAPTION
Branch info
STATUS_INCOMPARABLE_BRANCHES
Files from the package are incompatible with files on your system.
STR_MIGRATE_BLOCKLIST_REC
Reinstall the packages listed above, and then install .
STR_UNKNOWN_PACKAGE
STATUS_PREREQUISITE_FAILED
Setup cannot continue because one or more pre-requisites required to
install& failed. For More details check the Log File. Update.exe can throw
this error when it starts to download if the computer is running under
battery power (there may be a fix for this in the future).
STR_WINDOWS_TYPE5
Windows XP Version 2003
STR_HFSLP_ERROR
An error occurred while attempting to integrate this software update
package. Verify that the architecture, language, and service pack level of
this software update are valid for the target distribution folder.
STR_HFSLP_EXPRESS
Express software update packages cannot be integrated. To download a version
of the fix that can be integrated, visit http://www.microsoft.com/downloads.
STR_HFSLP_EXTRACTED
Extracted packages cannot be integrated. The /integrate switch must be used
with the original software update package.
0x8007f0fa
STR_HFSLP_NOTFOUND
Setup was unable to locate the distribution folder that you wish to
integrate with this software update package. The /integrate switch requires
the full path to the distribution folder.
More byte ranges required.
Required payload available, ready to install.
The delta was not found in the PSF. Update cannot find information about how
to upgrade this binary. SUS can terminate installation.
Update cannot find information about how to upgrade this binary
Index file does not have a valid signature. Index file has an invalid
signature. The package is corrupt. SUS can terminate installation.
STR_UPDATE_ALREADY_RUNNING
Setup has detected that another update is in progress. Please complete that
installation or removal and try again.
The state of machine changed since last inventory analysis. Update.exe has
to restart the process with /si.
Two consecutive attempts to download delta failed without any progress and
there is no use in continuing as express package. Revert to self-contained
error codes should not be returned out of update.exe
error codes should not be returned out of update.exe
CO_E_Server_Exec_Failure
CO_E_SERVER_STOPPING
NTE_Bad_Signature
0x8009000B
NTE_Bad_Key_State
NTE_PROV_TYPE_NOT_DEF
0x8009001D
Error_Write_Fault
SEC_E_SECPKG_NOT_FOUND
The requested security package does not exist
Sec_E_Algorithm_Mismatch
The client and the server cannot communicate, because they do not possess a
common algorithm
0x8009033F
SEC_E_Shutdown_IN_Progress
CRYPT_E_File_Error
An error occurred while reading or writing to a file
0x8009200D
Crypt_E_Bad_Msg
Not a cryptographic message or the cryptographic message is not formatted
Crypt_E_Security_Settings
The cryptographic operation failed due to a local security option setting
Trust_E_System_Error
A system-level error occurred while verifying trust
Trust_E_Time_Stamp could not be verified
Trust_E_Bad_Digest
The digital signature of the object did not verify
TRUST_E_BASIC_CONSTRAINTS
0x800A0046
CTL_PermissionDenied
0x800a01ae
IXP_NNTP_NO_SUCH_ARTICLE_FOUND
This can occur after a control selfupdate that has not fully completed and
requires a reboot.
0x800a138f
ERROR_RESOURCE_NOT_FOUND
Javascript runtime error
0x800B0001
Trust_E_Provider_Unknown
0x800B0002
Trust_E_ActionUnknown
The trust verification action specified is not supported by the specified
trust provider.
0x800B0003
TRUST_E_SUBJECT_FORM_UNKNOWN
The form specified by the subject is not one supported or known by the
specified trust provider
0x800B0004
TRUST_E_SUBJECT_NOT_TRUSTED
&The subject is not trusted for the specified action.
0x800B0100
TRUST_E_NOSIGNATURE
No signature was present in the subject
0x800B0101
Cert_E_Expired
Verifying against the current system clock or the timestamp in the signed
0x800B0109
CERT_E_UNTRUSTEDROOT
A certificate chain processed, but terminated in a root certificate which is
not trusted by the trust provider
0x800b010d
Cert_E_Untrustedtestroot
The certification path terminates with the test root which is not trusted
with the current policy settings
0x800B0110
CERT_E_WRONG_USAGE
0x800C0002
Inet_E_Invalid_URL
0x800F0101
SPAPI_E_Section_Not_Found
The required section was not found in the INF
0x800F020B
SPAPI_E_No_Such_Devinst&&
device instance does not exist
0x800F0217
SPAPI_E_Bad_Service_Installsect
A service installation section in this INF is invalid
0x800F022B
SPAPI_E_DI_Dont_Install
The class installer has denied the request to install or upgrade this device
0x800F022F
SPAPI_E_No_Catalog_for_OEM_INF
The third-party INF does not contain digital signature information
0x800F0244
SPAPI_E_Signature_Osattribure_Mismatch
The software was tested for compliance on a different version of Windows and
may not be compatible with this version
0x800FF8F0
0x800FFBBE
0x800FFC02
0x800FFC0D
BG_E_HTTP_ERROR_100&
The request can be continued.
BG_E_HTTP_ERROR_101&
The server switched protocols in an upgrade header.
BG_E_HTTP_ERROR_200
The server's response was not valid. The server was not following the
defined protocol. Resume the job, and then Background Intelligent Transfer
Service (BITS) will try again.
BG_E_HTTP_ERROR_201
The request was fulfilled and resulted in the creation of a new resource.
0x801900CA
BG_E_HTTP_ERROR_202&
The request was accepted for processing, but the processing has not been
completed yet.
0x801900CB
BG_E_HTTP_ERROR_203&
The returned metadata in the entity-header is not the definitive set
available from the server of origin.
0x801900CC
BG_E_HTTP_ERROR_204
The server has fulfilled the request, but there is no new information to
send back.
0x801900CD
BG_E_HTTP_ERROR_205
The server's response was not valid. The server was not following the
defined protocol. Resume the job, and then Background Intelligent Transfer
Service (BITS) will try again.
0x801900CE
BG_E_HTTP_ERROR_206
The server fulfilled the partial GET request for the resource.
0x8019012C
BG_E_HTTP_ERROR_300
The server could not return the requested data.
0x8019012D
BG_E_HTTP_ERROR_301
The requested resource was assigned to a new permanent Uniform Resource
Identifier (URI), and any future references to this resource should use one
of the returned URIs.
0x8019012E
BG_E_HTTP_ERROR_302
The requested resource was assigned a different Uniform Resource Identifier
(URI). This change is temporary.
0x8019012F
BG_E_HTTP_ERROR_303
The response to the request is under a different Uniform Resource Identifier
(URI) and must be retrieved using a GET method on that resource.
BG_E_HTTP_ERROR_304
The server's response was not valid. The server was not following the
defined protocol. Resume the job, and then Background Intelligent Transfer
Service (BITS) will try again.
BG_E_HTTP_ERROR_305
The requested resource must be accessed through the proxy given by the
location field.
BG_E_HTTP_ERROR_307
The URL has been temporarily relocated. Try again later.
BG_E_HTTP_ERROR_400
The server cannot process the request because the syntax is not valid.
BG_E_HTTP_ERROR_401
The requested resource requires user authentication.
BG_E_HTTP_ERROR_402
The server's response was not valid. The server was not following the
defined protocol. Resume the job, and then Background Intelligent Transfer
Service (BITS) will try again.
BG_E_HTTP_ERROR_403
The client does not have sufficient access rights to the requested server
object. Cannot execute requested URL in the current application pool IIS
returns this error in some transient error cases too such as 403.9 --
Forbidden: Too many clients are trying to connect to the Web server.403.15
-- Forbidden: Client access licenses have exceeded limits on the Web server.
BG_E_HTTP_ERROR_404&
The requested URL does not exist on the server.
BG_E_HTTP_ERROR_405
The method used is not allowed.
BG_E_HTTP_ERROR_406
No responses acceptable to the client were found.
BG_E_HTTP_ERROR_407
Proxy authentication is required.
BG_E_HTTP_ERROR_408
The server timed out waiting for the request.
BG_E_HTTP_ERROR_409
The request could not be completed because of a conflict with the current
state of the resource. The user should resubmit the request with more
information.
0x8019019A
BG_E_HTTP_ERROR_410
The requested resource is not currently available at the server, and no
forwarding address is known.
0x8019019B
BG_E_HTTP_ERROR_411
The server cannot accept the request without a defined content length.
0x8019019C
BG_E_HTTP_ERROR_412
The precondition given in one or more of the request header fields evaluated
to false when it was tested on the server.
0x8019019D
BG_E_HTTP_ERROR_413
The server cannot process the request because the request entity is too
0x8019019E
BG_E_HTTP_ERROR_414
The server cannot process the request because the request Uniform Resource
Identifier (URI) is longer than the server can interpret.
0x8019019F
BG_E_HTTP_ERROR_415
The server's response was not valid. The server was not following the
defined protocol. Resume the job, and then Background Intelligent Transfer
Service (BITS) will try again.
BG_E_HTTP_ERROR_417&
The server could not meet the expectation given in an Expect request-header
BG_E_HTTP_ERROR_449
The server's response was not valid. The server was not following the
defined protocol. Resume the job, and then Background Intelligent Transfer
Service (BITS) will try again.
BG_E_HTTP_ERROR_500
The server encountered an unexpected condition that prevented it from
fulfilling the request.
BG_E_HTTP_ERROR_501
The server does not support the functionality required to fulfill the
BG_E_HTTP_ERROR_502&
The server, while acting as a gateway or proxy to fulfill the request,
received an invalid response from the upstream server it accessed.
BG_E_HTTP_ERROR_503
The service is temporarily overloaded.
BG_E_HTTP_ERROR_504
The request was timed out waiting for a gateway. Can typically be a DNS
BG_E_HTTP_ERROR_505
The server does not support the HTTP protocol version that was used in the
request message.
0x801901FA
BITS_MC_JOB_CANCELLED
The administrator& canceled job on behalf of %3.& The job ID was %1.
BITS_MC_FILE_DELETION_FAILED&
While canceling job, BITS was not able to remove the temporary files.
BITS_MC_FILE_DELETION_FAILED_MORE
Due to space limitations, not all files are listed here.& Check for
additional files of the form BITxxx.TMP in the same directory.
BITS_MC_JOB_PROPERTY_CHANGE
The administrator modified the property of job.& The job ID was %1.
BITS_MC_JOB_TAKE_OWNERSHIP
The administrator& took ownership of job.& The job ID was %1.
BITS_MC_JOB_SCAVENGED
Job was canceled after being inactive for more than xx days.& The job ID was
BITS_MC_JOB_NOTIFICATION_FAILURE
Job& failed to notify its associated application.& BITS will retry in xx
minutes.& The job ID was %1.
BITS_MC_STATE_FILE_CORRUPT
The BITS job list is not in a recognized format.& It may have been created
by a different version of BITS.& The job list has been cleared.
BITS_MC_FAILED_TO_START
The BITS server failed to start. Try restarting the service at a later time.
BG_E_Not_Found
The requested job was not found.
BG_E_INVALID_STATE
The requested action is not allowed in the current job state. The job might
have been canceled or completed transferring. It is in a read-only state
BG_E_EMPTY
There are no files attached to this job. Attach files to the job, and then
try again.
BG_E_FILE_NOT_AVAILABLE
No file is available because no URL generated an error.
BG_E_PROTOCOL_NOT_AVAILABLE
No protocol is available because no URL generated an error.
BG_S_ERROR_CONTEXT_NONE
No errors have occurred.
BG_E_ERROR_CONTEXT_UNKNOWN
The error occurred in an unknown location.
BG_E_ERROR_CONTEXT_GENERAL_QUEUE_MANAGER
The error occurred in the Background Intelligent Transfer Service (BITS)
queue manager.
BG_E_ERROR_CONTEXT_LOCAL_FILE
The error occurred while the local file was being processed. Verify that the
file is not in use, and then try again.
0x8020000A
BG_E_ERROR_CONTEXT_REMOTE_FILE
The error occurred while the local file was being processed. Verify that the
file is not in use, and then try again.
0x8020000B
BG_E_ERROR_CONTEXT_GENERAL_TRANSPORT
The error occurred in the transport layer. The client could not connect to
the server.
0x8020000C
BG_E_ERROR_CONTEXT_QUEUE_MANAGER_NOTIFICATION
The error occurred while the notification callback was being processed.
Background Intelligent Transfer Service (BITS) will try again later.
0x8020000D
BG_E_Destination_Locked
The destination file system volume is not available. Verify that another
program, such as CheckDisk, is not running, which would lock the volume.
When the volume is available, Background Intelligent Transfer Service (BITS)
will try again.
0x8020000E
BG_E_VOLUME_CHANGED
The destination volume has changed. If the disk is removable, it might have
been replaced with a different disk. Reinsert the original disk and resume
0x8020000F
BG_E_ERROR_INFORMATION_UNAVAILABLE
No errors have occurred.
BG_E_NETWORK_DISCONNECTED
There are currently no active network connections. Background Intelligent
Transfer Service (BITS) will try again when an adapter is connected.
BG_E_MISSING_FILE_SIZE
When BITS sends a HEAD request and server/proxy doesn’t return
Content-Length header in the response, BITS puts the job in ERROR state with
BG_E_MISSING_FILE_SIZE. BITS 1.5 puts the job in ERROR state with
BG_E_INVALID_SERVER_RESPONSE error. Apache 2.0 proxy server is known to
exhibit this behavior.
BG_E_INSUFFICIENT_HTTP_SUPPORT
The server does not support HTTP 1.1.
BG_E_INSUFFICIENT_RANGE_SUPPORT&
BITS uses range header in HTTP requests to request parts of a file. If the
server or proxy doesn’t understand Range requests and returns full file
instead of the requested range, BITS puts the job in ERROR state. Apache 1.3
proxy is known to show this behavior if the requested file is already in the
BG_E_REMOTE_NOT_SUPPORTED
Background Intelligent Transfer Service (BITS) cannot be used remotely.
BG_E_NEW_OWNER_DIFF_MAPPING
The drive mapping for the job is different for the current owner than for
the previous owner. Use a UNC path instead.
BG_E_NEW_OWNER_NO_FILE_ACCESS
The new owner has insufficient access to the local files for the job. The
new owner might not have permissions to access the job files. Verify that
the new owner has sufficient permissions, and then try again.
BG_S_PARTIAL_COMPLETE
Some of the transferred files were deleted because they were incomplete
BG_E_PROXY_LIST_TOO_LARGE
The HTTP proxy list cannot be longer than 32,000 characters. Try again with
a shorter proxy list.
BG_E_PROXY_BYPASS_LIST_TOO_LARGE
The HTTP proxy bypass list cannot be longer than 32,000 characters. Try
again with a shorter bypass proxy list.
0x8020001A
BG_S_UNABLE_TO_DELETE_FILES
Some of the temporary files could not be deleted. Check the system event log
for the complete list of files that could not be deleted.
0x8020001B
BG_E_INVALID_SERVER_RESPONSE
The server's response was not valid. The server was not following the
defined protocol. Resume the job, and then Background Intelligent Transfer
Service (BITS) will try again.
0x8020001C
BG_E_TOO_MANY_FILES
No more files can be added to this job.
0x8020001D
BG_E_LOCAL_FILE_CHANGED&
The local file was changed during the transfer. Recreate the job, and then
try to transfer it again.
0x8020001E
BG_E_ERROR_CONTEXT_REMOTE_APPLICATION
The program on the remote server reported the error.
0x8020001F
BG_E_SESSION_NOT_FOUND
The specified session could not be found on the server. Background
Intelligent Transfer Service (BITS) will try again.
BG_E_TOO_LARGE
The job is too large for the server to accept. This job might exceed a job
size limit set by the server administrator. Reduce the size of the job, and
then try again.
BG_E_STRING_TOO_LONG&&
The specified string is too long.
BG_E_CLIENT_SERVER_PROTOCOL_MISMATCH
The client and server versions of Background Intelligent Transfer Service
(BITS) are incompatible.
BG_E_SERVER_EXECUTE_ENABLE&
Scripting OR execute permissions are enabled on the IIS virtual directory
associated with the job. To upload files to the virtual directory, disable
the scripting and execute permissions on the virtual directory.
BG_E_No_Progress BITS
The job is not making headway.& The server may be misconfigured.& Background
Intelligent Transfer Service (BITS) will try again later.
BG_E_USERNAME_TOO_LARGE
The user name cannot be longer than 300 characters. Try again with a shorter
BG_E_PASSWORD_TOO_LARGE
The password cannot be longer than 300 characters. Try again with a shorter
BG_E_INVALID_AUTH_TARGET
The authentication target specified in the credentials is not defined.
BG_E_INVALID_AUTH_SCHEME
The authentication scheme specified in the credentials is not defined.
BG_E_FILE_NOT_FOUND
The specified file name does not match any of the files in the job.
0x8020002A
BG_S_PROXY_CHANGED&
The proxy server was changed.
0x8020002B
BG_E_INVALID_RANGE
The requested byte range extends beyond the end of the web page.& Use byte
ranges that are wholly within the page.
0x8020002C
BG_E_OVERLAPPING_RANGES&
The list of byte ranges contains some overlapping ranges, which are not
supported.
0x8020002D
BG_E_CONNECT_FAILURE
A connection could not be established.
0x8020002E
BG_E_CONNECTION_CLOSED&
The connection was prematurely closed.
0x8020002F
BG_E_KEEP_ALIVE_FAILURE
The connection for a request that specifies the Keep-alive header was closed
unexpectedly.
BG_E_MESSAGE_LENGTH_LIMIT_EXCEEDED
A message was received that exceeded the specified limit when sending a
request or receiving a response from the server.
BG_E_NAME_RESOLUTION_FAILURE
The host name could not be found.
BG_E_PENDING
An internal asynchronous request is pending.
BG_E_PIPELINE_FAILURE
BG_E_PROTOCOL_ERROR
The response received from the server was complete but indicated a
protocol-level error.
BG_E_PROXY_NAME_RESOLUTION_FAILURE
The proxy name could not be found.
BG_E_RECEIVE_FAILURE
A complete response was not received from the server.
BG_E_REQUEST_CANCELED&
The request was canceled.
BG_E_SECURE_CHANNEL_FAILURE&
An error occurred while establishing a connection using SSL.
BG_E_SEND_FAILURE&
&complete request could not be sent to the remote server.
0x8020003A
BG_E_SERVER_PROTOCOL_VIOLATION
The server response was not valid.
0x8020003B
BG_E_TIMEOUT
The operation exceeded the time limit.
0x8020003C
BG_E_TRUST_FAILURE
A server certificate could not be validated.
0x8020003D
BG_E_UNKNOWN_ERROR
A unknown error occured.
0x8020003E
BG_E_BLOCKED_BY_POLICY
Group Policy settings prevent background jobs from running at this time.
0x8020003F
The supplied proxy server or bypass list is invalid.
BG_E_INVALID_CREDENTIALS
The format of the supplied security credentials is invalid.
&SUS_E_NO_SERVICE
for whatever reason, SUS agent can not provide the service
&SUS_E_MAX_CAPACITY_REACHED
maximum capacity of the service is reached
&SUS_E_UNKNOWN_ID
&id not found
&SUS_E_NOT_INITIALIZED
&object is not correctly initialized
&SUS_E_RANGEOVERLAP
&Update handler attempted to request a byte range that overlapped a
previously requested byte range
&SUS_E_TOOMANYRANGES&
&Update handler attempted to request too many ranges
SUS_S_ALREADY_UNINSTALLED ---& SUS_E_INVALIDINDEX&&
The update to be uninstalled is already not installed -- An attempt was made
to use an invalid index
&SUS_E_ITEMNOTFOUND
&A query was made for an item with a particular key and that key was not
&SUS_E_OPERATIONINPROGRESS
&The caller attempted to perform an operation on an interface while another
operation was in progress.&
0x8024000a
&SUS_E_COULDNOTCANCEL
&The caller attempted to cancel an operation that is not cancelable
0x8024000B
SUS_E_CALL_CANCELLED
call has been cancelled
0x8024000C
&SUS_E_NOOP&
&no operation is needed
0x8024000D
&SUS_E_XML_MISSINGDATA
&the SUS agent is attempting to parse an update's XML blob and has not found
expected data
0x8024000E
SUS_E_XML_INVALID
the SUS agent is attempting to parse an update's XML blob and has
encountered data that is invalid
0x8024000F
SUS_E_CYCLE_DETECTED
cycle detected in meta data
&SUS_E_TOO_DEEP_RELATION&
&too deep relation ship found
&SUS_E_REG_VALUE_INVALI
&registry value was read but is invalid
SUS_E_REG_VALUE_INVALID
registry value was read but is invalid
&SUS_E_EE_UNKNOWN_EXPRESSION&
&an expression handler was passed an expression that it doesn't know about
&SUS_E_EE_INVALID_EXPRESSION&
&an expression handler was passed an expression that is bad.
&SUS_E_EE_MISSING_METADATA&
&an expression handler was passed an expression that requires an
applicability metadata blob, but did not receive one or received too many.
&SUS_E_INSTALL_NOT_ALLOWE
&try to install while another install is going on or reboot is pending
SUS_E_NOT_APPLICABLE
install is not needed because no updates are applicable
WU_E_NO_USERTOKEN&
operation failed due to missing user token
WU_E_EXCLUSIVE_INSTALL_CONFliCT
try to install an exclusive update with other updates at the same time
0x8024001a
WU_E_POLICY_NOT_SET
policy value is not set
0x8024001b
WU_E_SELFUPDATE_IN_PROGRESS
self-update in progress
0x8024001C
SUS_E_WRONGMSIVERSION
0x8024001D
WU_E_INVALID_UPDATE
an update had bogus metadata
0x8024001E
WU_E_SERVICE_STOP
call was aborted due to service stop or system shut down
0x8024001F
SUS_E_NO_CONNECTION
no network connection is available to finish the operation
SUS_E_NO_INTERACTIVE_USER
interactive user is missing to finish the operation
WU_E_TIME_OUT
operation timed out
WU_E_ALL_UPDATES_FAILED
operation failed on all specified updates
WU_E_EULAS_DECLINED
EULA's for all the updates are declined
WU_E_NO_UPDATE
there are no update
WU_E_USER_ACCESS_DISABLED
User access to Windows Update is prevented by Group Policy setting
WU_E_INVALID_UPDATE_TYPE
invalid type of update
WU_E_URL_TOO_LONG
URL is too long
WU_E_UNINSTALL_NOT_ALLOWED
uninstall is not allowed due to non managed environment
WU_E_INVALID_PRODUCT_LICENSE
A product with an invalid license was found on the system.
0x8024002a
WU_E_MISSING_HANDLER
A component required for detecting applicable updates was missing.
0x8024002b
WU_E_LEGACYSERVER
The Sus server we are talking to is a Legacy Sus Server (Sus Server 1.0)
0x8024002c
WU_E_BIN_SOURCE_ABSENT
A binary-delta patch failed because the source was required
0x8024002d
WU_E_FF_SOURCE_ABSENT
a full-file patch failed because the source was required
0x8024002E
SUS_E_WU_DISABLED
non managed server access is disallowed
0x8024002f
WU_E_CALL_CANCELLED_BY_POLICY
call cancelled because of DisableWindowsUpdateAccess policy takes effect
WU_E_INVALID_PROXY_SERVER
invalid format for proxy list
WU_E_INVALID_FILE
file is not of the right format
WU_E_INVALID_CRITERIA
invalid criteria string
WU_E_EULA_UNAVAILABLE
EULA download failure
WU_E_DOWNLOAD_FAILED
Failed to download
WU_E_UPDATE_NOT_PROCESSED
INTERNAL ONLY: The update was not processed.
WU_E_INVALID_OPERATION
The operation is invalid for the object's current state.
WU_E_NOT_SUPPORTED
The invoked functionality is not supported.
0x80240FFF
WU_E_UNEXPECTED
generic unexpected failure
WU_E_MSI_WRONG_VERSION
The MSI version on the machine is less than what we expect (SUS 2.0 requires
WU_E_MSI_NOT_CONFIGURED
MSI is not configured
WU_E_MSP_DISABLED&
MSI patching is disabled by policy
0x80241fff
U_E_MSP_UNEXPECTED
generic unexpected MSP failure
SUS_E_UH_REMOTEUNAVAILABLE
The caller requested a remote object, but no remote process is available
WU_E_UH_LOCALONLY
The caller requested a remote object, but the specified handler is local
WU_E_UH_UNKNOWNHANDLER
The caller requested an unknown handler object
WU_E_UH_REMOTEALREADYACTIVE
The caller requested an unknown handler object
SUS_E_UH_DOESNOTSUPPORTACTION
The update does not support the current action (install or uninstall)
SUS_E_UH_WRONGHANDLER
The caller tried to use the wrong handler for an action
SUS_E_UH_INVALIDMETADATA
The caller passed an update with invalid metadata to the handler
SUS_E_UH_INSTALLERHUNG
The installer took too long and was terminated
SUS_E_UH_OPERATIONCANCELLED
The install was canceled via a handler method (as opposed to, for example,
an installer running with UI that was cancelled externally to SUS)
SUS_E_UH_BADHANDLERXML
The XML contained in the handler specific data for the update is invalid.
0x8024200a
WU_E_UH_CANREQUIREINPUT
The update may require user input so can not be installed in this context.
0x8024200B
SUS_E_UH_INSTALLERFAILURE
At least one update passed to the handler failed to install.
0x8024200c
WU_E_UH_FALLBACKTOSELFCONTAINED
Handler should fall back to self-contained from delta.
0x8024200D
SUS_E_UH_NEEDANOTHERDOWNLOAD
The installer requires more data to be downloaded
0x8024200E
WU_E_UH_NOTIFYFAILURE
The attempted operation was not allowed
0x80242fff
WU_E_UH_UNEXPECTED
&generic unexpected update handler failure
0x80243fff
WU_E_AUCLIENT_UNEXPECTED
generic unexpected UI [AU Client] failures
WU_E_PT_SOAPCLIENT_BASE
Used as a base to map SOAPCLIENT_ERROR errors.
SUS_E_PT_SOAPCLIENT_INITIALIZE
SOAPCLIENT_INITIALIZE_ERROR&&&&& initialization failed -- most likely an
MSXML installation problem
WU_E_PT_SOAPCLIENT_OUTOFMEMORY
SOAPCLIENT_OUTOFMEMORY out of memory
WU_E_PT_SOAPCLIENT_GENERATE
SOAPCLIENT_GENERATE_ERROR failed in generating the response
SUS_E_PT_SOAPCLIENT_CONNECT
&failed connecting to server
WU_E_PT_SOAPCLIENT_SEND
SOAPCLIENT_SEND_ERROR failed in sending message. This generic error has been
deprecated in favor of the more specific underlying WinHTTP errors, which
will be returned when the client encounters an error communicating with the
WU_E_PT_SOAPCLIENT_SERVER
SOAPCLIENT_SERVER_ERROR server error
WU_E_PT_SOAPCLIENT_SOAPFAULT
SOAPCLIENT_SOAPFAULT a SOAP Fault was returned by the server. See the more
specific WU_E_PT_SOAP_xxxx mappings when a SOAP fault was returned by the
SUS_E_PT_SOAPCLIENT_PARSEFAULT
SOAPCLIENT_PARSEFAULT_ERROR&&&&& failed in parsing SOAP fault
WU_E_PT_SOAPCLIENT_READ
SOAPCLIENT_READ_ERROR failed in reading response
0x8024400A
SUS_E_PT_SOAPCLIENT_PARSE
&failed in parsing response
0x8024400b
WU_E_PT_SOAP_VERSION
SOAP_E_VERSION_MISMATCH Invalid namespace for the SOAP envelope
0x8024400c
WU_E_PT_SOAP_MUST_UNDERSTAND
SOAP_E_MUST_UNDERSTAND Child of header with mustUnderstand attribute = 1
wasn't understood or obeyed
0x8024400D
SUS_E_PT_SOAP_CLIENT
SOAP_E_CLIENT&&The message was malformed or incomplete. No reason to retry
unless problem fixed.
0x8024400E
SUS_E_PT_SOAP_SERVER
The message was OK but server couldn't process at the moment. Same message
*may* succeed at a later time.
0x8024400f
WU_E_PT_WMI_ERROR
An unspecified error occurred using WMI
SUS_E_PT_EXCEEDED_MAX_SERVER_TRIPS
The maximum allowed number of round trips to the server was exceeded
SUS_E_PT_SUS_SERVER_NOT_SET
WUServer policy value is missing in the registry
WU_E_PT_DOUBLE_INITIALIZATION
object is initialized second time
WU_E_PT_INVALID_COMPUTER_NAME
Cannot determine computer name
WU_E_PT_INVALID_COMPUTER_LSID
Cannot determine computer LSID
SUS_E_PT_REFRESH_CACHE_REQUIRED
Server replied with InvalidCookie or ServerChanged Caller should refresh its
internal state then repeat the call to Protocol Talker
SUS_E_PT_HTTP_STATUS_BAD_REQUEST
Http status 400 - invalid syntax
SUS_E_PT_HTTP_STATUS_DENIED&
Http status 401 - access denied
SUS_E_PT_HTTP_STATUS_FORBIDDEN
Http status 403 - request forbidden
SUS_E_PT_HTTP_STATUS_NOT_FOUND
Http status 404 - object not found
0x8024401A
SUS_E_PT_HTTP_STATUS_BAD_METHOD
Http status 405 - method is not allowed
0x8024401B
SUS_E_PT_HTTP_STATUS_PROXY_AUTH_REQ&
Http status 407 - proxy authentication required
0x8024401c
WU_E_PT_HTTP_STATUS_REQUEST_TIMEOUT
Http status 408 - server timed out waiting for request
0x8024401d
WU_E_PT_HTTP_STATUS_CONFLICT
Http status 409 - user should resubmit with more info
0x8024401e
WU_E_PT_HTTP_STATUS_GONE
Http status 410 - the resource is no longer available
0x8024401f
WU_E_PT_HTTP_STATUS_SERVER_ERROR
Http status 500 - internal server error
WU_E_PT_HTTP_STATUS_NOT_SUPPORTED
Http status 501 - required not supported
SUS_E_PT_HTTP_STATUS_BAD_GATEWAY
Http status 502 - error response received from gateway
SUS_E_PT_HTTP_STATUS_SERVICE_UNAVAIL
Http status 503 - temporarily overloaded
SUS_E_PT_HTTP_STATUS_GATEWAY_TIMEOUT
Http status 504 - timed out waiting for gateway
WU_E_PT_HTTP_STATUS_VERSION_NOT_SUP
Http status 505 - HTTP version not supported
SUS_E_PT_FILE_LOCATIONS_CHANGED
&Server replied with FileLocationsChange Caller should refresh its internal
state then repeat the call to Protocol Talker
SUS_E_PT_REGISTRATION_NOT_SUPPORTED
Client doesn't support registration with non-SUS server
WU_E_PT_NO_AUTH_PLUGINS_REQUESTED
Server returned an empty AuthInfo list
SUS_E_PT_NO_AUTH_COOKIES_CREATED
The client was unable to create any valid auth cookies
WU_E_PT_INVALID_CONFIG_PROP
One of the Config ConfigurationProperty values was wrong
0x8024402a
WU_E_PT_CONFIG_PROP_MISSING
One of the Config ConfigurationProperty values was wrong
0x8024402b
WU_E_PT_HTTP_STATUS_NOT_MAPPED
Http status other than 200, but not mapped above
0x8024402c
WU_E_PT_WINHTTP_NAME_NOT_RESOLVED
Winhttp SendRequest/ReceiveResponse failed with 0x2ee7 error. Either the
proxy server or target server name can not be resolved. Corresponding to
ERROR_WINHTTP_NAME_NOT_RESOLVED. Stop/Restart service or reboot the machine
if you see this error frequently.&
0x80244fff
WU_E_PT_UNEXPECTED
generic unexpected protocol talker failure
WU_E_REDIRECTOR_LOAD_XML
The XML extracted from the wuredir.cab failed to load into the DOM
WU_E_REDIRECTOR_S_FALSE
An expected XML element node, map, attribute, value, etc. could not be
WU_E_REDIRECTOR_ID_SMALLER
The redirectorId in the downloaded wuredir.cab is smaller than the cached
0x8024502d
WU_E_PT_SAME_REDIR_ID
During recovery Protocol Talker failed to download a wuredir.cab with a
newer redirectorId from the server
0x8024502e
WU_E_PT_NO_MANAGED_RECOVER
A redirector recovery action was specified, but the server is managed.
0x80245fff
WU_E_REDIRECTOR_UNEXPECTED
generic unexpected redirector failure
SUS_E_DM_URLNOTAVAILABLE
The requested file does not have an URL
SUS_E_DM_INCORRECTFILEHASH
The file digest did not match the expected value
WU_E_DM_UNKNOWNALGORITHM
The file metadata requested an unknown hash algorithm
WU_E_DM_NEEDDOWNLOADREQUEST
A download request from a download handler is required.
SUS_E_DM_NONETWORK
Network connection was not available
SUS_E_DM_WRONGBITSVERSION
The version of BITS installed on the machine is not compatible.
SUS_E_DM_NOTDOWNLOADED
The update has not been downloaded.
SUS_E_DM_FAILTOCONNECTTOBITS
Failed to create the IBackgroundCopyManager interface to BITS. The BITS
service may have been disabled
WU_E_DM_BITSTRANSFERERROR
A BITS transfer error occurred, but the exact error could not be retrieved.
0x80246fff
WU_E_DM_UNEXPECTED
generic unexpected download manager failure
WU_E_DS_SHUTDOWN&
The call failed because the SUS agent is shutting down
WU_E_DS_INUSE
The call failed because the data store is in use and the operation can only
be executed on an idle data store.
WU_E_DS_INVALID
The data store is in an invalid state. This can occur if we attempt to&&
validate the database schema and find a mismatch between the current state
and the state we expect.
WU_E_DS_TABLEMISSING
The data store has a missing table
WU_E_DS_TABLEINCORRECT&
The data store has a table whose columns are not what SUS expects
WU_E_DS_INVALIDTABLENAME
The caller tried to open a table that is not in the datastore
WU_E_DS_BADVERSION
The data store's version does not match what the client expects
SUS_E_DS_NODATA
The caller asked for data that is not in the data store
WU_E_DS_MISSINGDATA&
The data store is in an invalid state because data that should be present is
missing. This error can occur if we encounter a column in a table that is
NULL when it is not allowed to be NULL.
WU_E_DS_MISSINGREF
&The data store is in an invalid state because data that should be present
is missing. This will occur if we try to fetch a linked row from another
table and the linked row does not exist.& This can happen with EULAs, files,
and/or localized properties referenced by an update.
0x8024800a
WU_E_DS_UNKNOWNHANDLER
The caller attempted to add an update that used an unknown update handler
0x8024800b
WU_E_DS_CANTDELETE
The caller attempted to delete an update that is referenced by one or more
0x8024800C
SUS_E_DS_LOCKTIMEOUTEXPIRED
The caller attempted to delete an update that is referenced by one or more
0x8024800d
WU_E_DS_NOCATEGORIES
The caller attempted to add a non-toplevel category update that contained no
parent categories
0x8024800e
WU_E_DS_ROWEXISTS
The caller attempted to add a row whose primary key matched an existing row
0x8024800f
WU_E_DS_STOREFILELOCKED
We attempted to initialize the datastore, but it was locked by another
WU_E_DS_CANNOTREGISTER
The caller is attepting to register the datastore with COM, but the store
cannot be loaded into the current process
SUS_E_DS_UNABLETOSTART
Could not create an out of proc datastore object
SUS_E_DS_MISSINGFILEFORURL
a file URL was passed in for a file that does not exist in the datastore
SUS_E_DS_DUPLICATEUPDATEID
&the server has passed the same update to the client with two different
revision ids
WU_E_DS_UNKNOWNSERVICE
the caller has requested some action on a service that is not known to the
SUS_E_DS_SERVICEEXPIRED
the caller has requested a service whose registration has expired
WU_E_DS_DECLINENOTALLOWED
an update cannot be declined while it is d